ValueRAM's KVR32N22S8/8 is a 1G x 64-bit (8GB) DDR4-3200 CL22 SDRAM (Synchronous DRAM), 1Rx8, memory module, based on eight 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-3200 timing of 22-22-22 at 1.2V. Each 288-pin DIMM uses gold contact fingers.
Compute MountMounting bracket with cable retention for Logitech RoomMate and other video conferencing compute devices.A CLEAN AND SECURE MOUNTING OPTIONSecurely mount your compute device out of sight and out of harm’s way. Designed for discreet installation behind displays, inside cabinets, or on carts, Compute Mount is a great fit for any video conferencing space — and perfect for Logitech RoomMate, Google Meet compute system, Intel NUC, and other video conferencing compute devices.FITS ROOMMATE AND OTHER SSF COMPUTESRobust steel mount fits Logitech RoomMate and other compatible small form factor compute devices using the standard 75 mm or 100 mm VESA mounting patterns.INTEGRATED CABLE RETENTIONCable retention clamp relieves cable strain and keeps connections tight and secure, including USB, HDMI, power, and network cables. The two-piece clamp is elevated for greater flexibility and less strain.HIDEAWAY DESIGNCompute Mount includes hardware to discreetly mount RoomMate or other compatible compute devices out of sight and out of harm’s way.
Anti-Static Wrist Strap
The P948-BRKT25 2.5-Inch SATA Hard Drive Mounting Kit improves the performance of your desktop computer and allows you to add significant data storage. It allows you to mount a 2.5-inch SATA hard disk drive (HDD) or solid state drive (SSD) into an empty 3.5-inch drive bay on your PC. The solid steel bracket comes with a 22-pin data/power SATA adapter cable that attaches to the 2.5-inch drive’s SATA port, the computer power supply’s LP4 port and an available SATA data connector on the host motherboard. Screws for mounting the bracket are also included.
Mount your server or networking equipment using this 8U wall mount rackThe RK812WALLO 8U Open Frame Wall Mount Equipment Rack (12in Depth) is a high quality, low cost relay rack that is easy to assemble and install into any environment. The rack can be wallmounted or installed as a free standing storage solution. This TAA compliant product adheres to the requirements of the US Federal Trade Agreements Act (TAA), allowing government GSA Schedule purchases.Able to accommodate common networking, audio-video and telecom equipment, the open rack offers a depth of 12in; the wall mounts are positioned 16in apart (center to center), making it suitable for mounting on virtually any wall surface, based on North American wall frame stud spacing standards.This 8U rack can be mounted to the wall in a server room, office, or above a doorway, expanding your workspace and keeping your equipment easily accessible.Backed by a StarTech.com lifetime warranty.The StarTech.com Advantage
Add 4 Gigabit Power over Ethernet ports to a PCI Express-enabled computerThe ST4000PEXPSE 4-Port PoE NIC lets you add four Gigabit Power over Ethernet ports through a single PCI Express slot. Each port can provide up to 25.5W of power, combining network data and power over a single Ethernet cable for reduced cable clutter and added convenience for remote PoE devices.The PCI express PoE card supports the IEEE 802.3at (Type 1 and 2) standard for Power Sourcing Equipment (PSE), and can deliver up to 48V DC power to compliant Powered Devices (PD). This eliminates the need for a separate power source and data connection for PoE devices such as IP cameras, IP phones or wireless access points.Suitable for any standard profile PCIe-enabled client, server or workstation, the PoE network card supports features such as Jumbo Frames (up to 9KB), VLAN tagging and Wake on LAN (WoL).Backed by a StarTech.com 2-year warranty and free lifetime technical support.The StarTech.com Advantage- Position your network devices where power outlets aren’t available, with 25.5 Watts per-port PoE output- Reduce expenses by using existing standard Cat5 (or better) Ethernet cabling to deliver power and data- Optimize network traffic with support for advanced features, like Jumbo Frames and VLAN tagging
Add Bluetooth 4.0 capabilities to a laptop or desktop computer through USBThe USBBT2EDR4 Class 2 USB Bluetooth® 4.0 Adapter lets you add Bluetooth wireless capabilities to a laptop or desktop computer through USB, with support for transfer distances of up to 10m (33ft).This Bluetooth adapter is based on the well-established Broadcom® 20702 chip, offering reliable throughput and Packet Loss Concealment (PLC) technology which reduces errors / dropped connections and improves audio performance.Compliant with Bluetooth 4.0 LE +EDR , the USB Bluetooth adapter offers data transfer rates up to 3 Mbps and low power consumption. This Bluetooth Smart Ready transceiver is an effective way to connect to a rapidly growing list of the Bluetooth Smart peripherals on the market, including the latest Apple® and Android™ smartphones and tablets, headsets or monitoring equipment. Bluetooth v4.0 also integrates added security for all transfers using 128-bit AES encryption.A conveniently portable device, this ultra-compact adapter is unobtrusive when connected to your laptop, so you won't have to remove it each time you store your laptop in a carrying case or bag. The adapter is also backward compatible with previous Bluetooth standards (v3.0, 2.x, and 1.x) to ensure connectivity with all of your Bluetooth devices.Backed by a StarTech.com 2-year warranty and free lifetime technical support.The StarTech.com Advantage
NAS installation and maintenance made convenient
Note: Search results and information may differ as they are provided by a third party.
In Stock*: Product stock is updated from the last business day and can change.
MFR: Netgear, Inc
Qty: 1
Part #: GS105NA
