Showing 60–70 of 358 results

SRT3000RMXLA-NCFeaturesAPC Smart-UPS SRT 3000VA RM 120V Network CardHigh density, double-conversion on-line power protection with scalable runtimeIncludes : CD with software , Documentation CD , Installation guide , Network Management Card , Rack Mounting brackets , Rack Mounting support rails , USB cable , Warranty card- 10/100 BaseT ConnectionConnect the device to a network using a 10 or 100 BaseT connection- Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenance- ECO ModeOperating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection- Green modePatent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.- LCD graphics displayText and mimic diagrams that display modes of operation, system parameters and alarms.- Rack/Tower convertibleProtects the initial investment in the UPS when migrating from tower to rack-mount environment.Serviceability- Audible alarmsProvides notification of changing utility power and UPS power conditions- Disconnected battery notificationWarns when a battery is not available to provide backup power.- Predicitive failure notificationProvides early-warning fault analysis ensuring proactive component replacement.- Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.- User-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)Protection- Generator compatibleEnsures clean, uninterrupted power to protected equipment when generator power is used.- Cold-start capableProvides temporary battery power when the utility power is out.- Power conditioningProtects connected loads from surges, spikes, lightning, and other power disturbances.- Input power factor correctionMinimizes installation costs by enabling the use of smaller generators and cabling.- Frequency and voltage regulationGives higher application availability by correcting poor frequency and voltage conditions without using the battery.- Resettable circuit breakerEasy recovery from overloads; no need to replace a fuse.- Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.Manageability- Network manageableProvides remote power management of the UPS over the network.- Serial connectivityProvides management of the UPS via a serial port.- SmartSlotCustomize UPS capabilities with management cards.- LED status indicatorsQuickly understand unit and power status with visual indicators.- InfraStruXure Manager CompatibleEnables centralized management via the APC InfraStruXure Manager.Adaptability- Plug-and-Play external batteriesEnsures clean, uninterrupted power to the loads when adding extra runtime to the UPS.- Flash upgradeable firmwareInstall maintenance releases of firmware remotely using FTP.- Rack/Tower convertibleProtects the initial investment in the UPS when migrating from tower to rack-mount environment.Availability- Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.- Automatic internal bypassSupplies utility power to the connected loads in the event of a UPS power overload or fault.- Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.- Scalable runtimeAllows additional run time to be quickly added as needed.- Automatic restart of loads after UPS shutdownAutomatically starts up the connected equipment upon the return of utility power.- Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replacedMarketing Features- Avoids costly power problems by keeping your IT equipment and data protected and available.Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events.- Low operating and maintenance costs with proven reliability and intelligent battery management.Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.- Save time with easy and convenient remote accessibility.Network manageable via serial, USB or optional Ethernet. Includes Powerchute® Network Shutdown Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.- Peace of mind that comes with full equipment compatibility and reliability of a leaderProvides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.

Peace of mind that comes with full equipment compatibility and reliability of a leaderProvides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.Save time with easy and convenient remote accessibility.Network manageable via serial, USB or optional Ethernet. Includes Powerchute Network Shutdown Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.Low operating and maintenance costs with proven reliability and intelligent battery management.Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.Avoids costly power problems by keeping your IT equipment and data protected and available.Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events.

High density, double-conversion on-line power protection with scalable runtime.- Generator compatible- Cold-start capable- Power conditioning- Frequency and voltage regulation- 208/240V to 120V Step-Down Transformer- Resettable circuit breaker- Safety-agency approved- Network manageable- Low operating and maintenance costs with proven reliability and intelligent battery management- Avoids costly power problems by keeping your IT equipment and data protected and available- Peace of mind that comes with full equipment compatibility and reliability of a leader- Save time with easy and convenient remote accessibility

APC APC Smart-UPS Ultra On-Line Lithium ion,

High Performance Computer and Electronics UPS for Premium Power Protection

"APC SMX2000LV. Output power capacity: 2 kVA, Output power: 1800 W, Waveform: Sine. AC outlet types: NEMA 5–15R, NEMA 5–20R, NEMA L5-20R, Power plug: NEMA 5-20P, AC outlets quantity: 10 AC outlet(s). Battery technology: Sealed Lead Acid (VRLA), Battery recharge time: 3 h. Form factor: Rackmount/Tower, Product color: Black, Rack capacity: 2U. Width: 7.01"" (178 mm), Depth: 19"" (483 mm), Height: 17"" (432 mm)"

FeaturesAPC Smart-UPS SRT 3000VA RM 208V Network CardHigh density, double-conversion on-line power protection with scalable runtimeIncludes : CD with software , Documentation CD , Installation guide , Network Management Card , Rack Mounting brackets , Rack mounting hardware , Rack Mounting support rails , USB cable , Warranty card10/100 BaseT ConnectionConnect the device to a network using a 10 or 100 BaseT connectionBattery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenanceECO ModeOperating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protectionGreen modePatent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.LCD graphics displayText and mimic diagrams that display modes of operation, system parameters and alarms.Rack/Tower convertibleProtects the initial investment in the UPS when migrating from tower to rack-mount environment.AvailabilityAutomatic restart of loads after UPS shutdownAutomatically starts up the connected equipment upon the return of utility power.Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replacedIntelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.Scalable runtimeAllows additional run time to be quickly added as needed.Automatic internal bypassSupplies utility power to the connected loads in the event of a UPS power overload or fault.Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.ManageabilitySmartSlotCustomize UPS capabilities with management cards.LED status indicatorsQuickly understand unit and power status with visual indicators.InfraStruXure Manager CompatibleEnables centralized management via the APC InfraStruXure Manager.Serial connectivityProvides management of the UPS via a serial port.Network manageableProvides remote power management of the UPS over the network.AdaptabilityFlash upgradeable firmwareInstall maintenance releases of firmware remotely using FTP.Rack/Tower convertibleProtects the initial investment in the UPS when migrating from tower to rack-mount environment.Plug-and-Play external batteriesEnsures clean, uninterrupted power to the loads when adding extra runtime to the UPS.Marketing FeaturesLow operating and maintenance costs with proven reliability and intelligent battery management.Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.Avoids costly power problems by keeping your IT equipment and data protected and available.Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events.Peace of mind that comes with full equipment compatibility and reliability of a leaderProvides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.Save time with easy and convenient remote accessibility.Network manageable via serial, USB or optional Ethernet. Includes Powerchute Network Shutdown Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.ServiceabilityAutomatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.User-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)Audible alarmsProvides notification of changing utility power and UPS power conditionsDisconnected battery notificationWarns when a battery is not available to provide backup power.Predicitive failure notificationProvides early-warning fault analysis ensuring proactive component replacement.ProtectionGenerator compatibleEnsures clean, uninterrupted power to protected equipment when generator power is used.Input power factor correctionMinimizes installation costs by enabling the use of smaller generators and cabling.Power conditioningProtects connected loads from surges, spikes, lightning, and other power disturbances.Frequency and voltage regulationGives higher application availability by correcting poor frequency and voltage conditions without using the battery.Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.Cold-start capableProvides temporary battery power when the utility power is out.Resettable circuit breakerEasy recovery from overloads; no need to replace a fuse.

SmartSlotCustomize UPS capabilities with management cards.Cold-start capableProvides temporary battery power when the utility power is out.Serial ConnectivityUse any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC's Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks.Resettable circuit breakersEnables a quick recovery from overload events.Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replacedDisconnected battery notificationWarns when a battery is not available to provide backup power.Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.Adjustable voltage-transfer pointsMaximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.Adjustable voltage sensitivityProvides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.Audible alarmsProvides notification of changing utility power and UPS conditions.Serial ConnectivityProvides management of the UPS via a serial port.Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.Boost and Trim Automatic Voltage Regulation (AVR)Gives higher application availability by correcting low and high voltage conditions without using the battery.Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. UL, FCC, CE, C-Tick approvals.Rack/Tower convertibleProtects the initial investment in the UPS when migrating from tower to rack-mount environment.Network manageableProvides remote management of the UPS over the network.Adjustable voltage sensitivityProvides the ability to adapt the Power Conditioner for optimal performance in specific power environments or generator applications.LED status indicatorsQuickly understand unit and power status with visual indicators.

High availability, ruggedized power protection for shipboard and other transportation applications.

Avoids costly power problems by keeping your IT equipment and data safe and availableNetwork grade power conditioning protects from damaging surges and disruptive noise. Solid state automatic voltage regulation boosts low input voltage up to 30% and trims high voltage up to 12% without battery operation. Reliable battery back-up capacity to power through outages or gracefully shutdown systemsSmarter productivity with ability to tailor to your specific application needsIntuitive LCD interface provides clear information with the ability to configure the UPS locally with easy to use navigation keys. Over 15 different programmable settings including switched outlet group control allow for application specific settings, thresholds and notifications.Save time with easy and convenient remote accessibilityNetwork manageable via serial, USB or optional ethernet. Includes Powerchute® Business Edition Software for convenient monitoring and control, safe operating system shutdown and innovative energy management capabilities.Peace of mind that comes with full equipment compatibility and reliability of a leaderProvides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.Low operating and maintenance costs with high efficiency, proven reliability and intelligent battery managementPatented green operating mode achieves efficiencies over 97%. Smart-ups was the first network UPS to be Energy Star certified. Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Dynamic battery replacement date indicator and automatic self tests insure battery reliability and warn in advance of needing replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down. Designed and manufactured by APC for over 23 years, Smart-UPS is the world’s most trusted network UPS with over 25 million units sold.