Showing 90–100 of 358 results

APC Smart-UPS SRT, Lithium-Ion, 2200VA 120V with SmartConnect

LCD display Alpha-Numeric Display which displays system parameters and alarms. Removable input/output wiring tray Allows quick and easy installation and maintenance of the UPS. Rack/Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment. Manageable external batteries Reduces preventative maintenance service needs by monitoring the health and status of the external batteries and their expected runtime. Automatic internal bypass Supplies utility power to the connected loads in the event of a UPS overload condition or fault. Scalable runtime Allows additional run time to be quickly added as needed. Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging. Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced. Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power. Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature. Network manageable Provides remote management of the UPS over the network. InfraStruXure Manager Compatible Enables centralized management via the APC InfraStruXure Manager. SmartSlot Customize UPS capabilities with management cards. LED status indicators Quickly understand unit and power status with visual indicators. Serial Connectivity Provides management of the UPS via a serial port. Plug-and-Play external batteries Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS. Flash upgradeable firmware Install maintenance releases of firmware remotely using FTP. User-replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR). Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Predicitive failure notification Provides early-warning fault analysis ensuring proactive component replacement. Disconnected battery notification Warns when a battery is not available to provide backup power. Audible alarms Provides notification of changing utility power and UPS conditions. Frequency and voltage regulation Gives higher application availability by correcting poor frequency and voltage conditions without using the battery. Power conditioning Protects connected loads from surges, spikes, lightning, and other power disturbances. Input power factor correction Minimizes installation costs by enabling the use of smaller generators and cabling. Generator compatible Ensures clean, uninterrupted power to protected equipment when generator power is used. Cold-start capable Provides temporary battery power when the utility power is out. Resettable circuit breaker Easy recovery from overloads; no need to replace a fuse. Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

APC SRT3000RMXLT uninterruptible power supply (UPS) Double-conversion (Online) 3 kVA 2700 W 3 AC outlet(s)

APC Smart UPS 3000VA LCD RM 2U 120V with 12FT CORDReliable network power protection designed for deployment in retail and open access environments.Includes : CD with software, Documentation CD, Installation guide, Rack mounting hardware, Rack Mounting support rails, Smart UPS signalling RS-232 cable, USB cable- Adjustable voltage sensitivityProvides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.- Adjustable voltage-transfer pointsMaximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.- Audible alarmsProvides notification of changing utility power and UPS power conditions- Automatic restart of loads after UPS shutdownAutomatically starts up the connected equipment upon the return of utility power.- Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.- Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenance- Boost and Trim Automatic Voltage Regulation (AVR)Eliminates voltage fluctuations as a source of AV signal degradation and component power-supply stress.- Disconnected battery notificationWarns when a battery is not available to provide backup power.- Energy meterProvides actual kilowatt hours of usage for energy conscious users.- Green modePatent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.- Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replaced- Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.- Intuitive LCD interfaceProvides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.- LED IndicatorsProvide easy-to-read status of the unit and utility power conditions.- Network manageableProvides remote power management of the UPS over the network.- Outlet group controlTurn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPSs with switched outlet groups).- Predicitive failure notificationProvides early-warning fault analysis ensuring proactive component replacement.- Predictive replace battery dateDynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.- Pure sine wave output on batterySimulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.- Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.- Sequenced network shutdown and rebootCustomize network shutdown and reboot sequence of connected servers and UPSs.- Serial connectivityUse any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC's Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks.- Sine wave outputEliminates humming and heat generated when powering tubelights and fans.- Single switched outlet groupSingle outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.- StruxureWare Data Center Expert compatibleEnables centralized management via StruxureWare Data Center Expert.- Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.- USB connectivityProvides management of the UPS via a USB port (not available on all models).- User-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)Serviceability- Easy to installInnovative design allows for fast, easy installation by almost anybody.- User-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)- Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replaced- Technical supportOur experienced technical support engineers are available to answer your questions, giving you peace of mind knowing the help you need is there when you need it.Availability- Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.- Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.- Power conditioningProtects connected loads from surges, spikes, lightning, and other power disturbances.- Pure sine wave output on batterySimulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.- Automatic restart of loads after UPS shutdownAutomatically starts up the connected equipment upon the return of utility power.Manageability- USB connectivityProvides management of the UPS via a USB port (not available on all models).- SmartSlotCustomize UPS capabilities with management cards.- Serial connectivityProvides management of the UPS via a serial port.- LED IndicatorsProvide easy-to-read status of the unit and utility power conditions.- Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.

APC Smart-UPS 750VA LCD RM 2U 120V with SmartConnect Port and Network Card

Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.

High Performance Battery Backup & Protection for Business Computers Includes: User Manual

APC APC Smart-UPS 750VA LCD 120V 1U Rackmoun

APC Symmetra LX, 9600 Watts / 12 kVA,Input 208V / Output 120V, 208V, Interface Port DB-9 RS-232, Smart-Slot, Extended runtime model -Warranty: 2 years repair or replace

Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.