Showing 140–150 of 370 results

APC Smart-UPS SRT 6000VA RM 208V IECHigh density, double-conversion on-line power protection with scalable runtimeIncludes : CD with software , Documentation CD , Installation guide , Rack Mounting brackets , Rack mounting hardware , Rack Mounting support rails , Temperature Probe , USB cable , Warranty card , Web/SNMP Management Card- 10/100 BaseT ConnectionConnect the device to a network using a 10 or 100 BaseT connection- Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenance- Green modePatent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.- Hard Wire InputUPS requires a hard wire input in order to deliver maximum output wattage to protected equipment- LCD graphics displayText and mimic diagrams that display modes of operation, system parameters and alarms.- Rack/Tower convertibleProtects the initial investment in the UPS when migrating from tower to rack-mount environment.

APC Smart-UPS, 700VA/450W, Input 120V, 230V/Output 120V, Interface Port DB-9 RS-232, SmartSlot.

AvailabilityBoost and Trim Automatic Voltage Regulation (AVR)Gives higher application availability by correcting low and high voltage conditions without using the battery.Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.Power conditioningProtects connected loads from surges, spikes, lightning, and other power disturbances.Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.Automatic restart of loads after UPS shutdownAutomatically starts up the connected equipment upon the return of utility power.Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.Cold-start capableProvides temporary battery power when the utility power is out.Disconnected battery notificationWarns when a battery is not available to provide backup power.ManageabilityNetwork manageableProvides remote management of the UPS over the network.Audible alarmsActively let you know if the unit is on battery, if the battery is low or if there is an overload condition.LED status indicatorsQuickly understand unit and power status with visual indicators.Serial ConnectivityProvides management of the UPS via a serial port.USB connectivityProvides management of the UPS via a USB port (not available on all models).Disconnected battery notificationWarns when a battery is not available to provide backup power.InfraStruXure Manager CompatibleEnables centralized management via the APC InfraStruXure Manager.

This parts kit contains spare parts for the APC product model shown.

GVX1250K1500HS Features- Galaxy VX 1250kVA Scalable to 1500kVA 400V, Start up 5x8- Highly efficient, scalable, 3-phase power protection with flexible operating modes and ECOnversion for large facilities, data centers, and business critical applications.- Includes: Installation guide, Start-Up Service

SRT3000RMXLA-NCFeaturesAPC Smart-UPS SRT 3000VA RM 120V Network CardHigh density, double-conversion on-line power protection with scalable runtimeIncludes : CD with software , Documentation CD , Installation guide , Network Management Card , Rack Mounting brackets , Rack Mounting support rails , USB cable , Warranty card- 10/100 BaseT ConnectionConnect the device to a network using a 10 or 100 BaseT connection- Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenance- ECO ModeOperating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection- Green modePatent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.- LCD graphics displayText and mimic diagrams that display modes of operation, system parameters and alarms.- Rack/Tower convertibleProtects the initial investment in the UPS when migrating from tower to rack-mount environment.Serviceability- Audible alarmsProvides notification of changing utility power and UPS power conditions- Disconnected battery notificationWarns when a battery is not available to provide backup power.- Predicitive failure notificationProvides early-warning fault analysis ensuring proactive component replacement.- Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.- User-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)Protection- Generator compatibleEnsures clean, uninterrupted power to protected equipment when generator power is used.- Cold-start capableProvides temporary battery power when the utility power is out.- Power conditioningProtects connected loads from surges, spikes, lightning, and other power disturbances.- Input power factor correctionMinimizes installation costs by enabling the use of smaller generators and cabling.- Frequency and voltage regulationGives higher application availability by correcting poor frequency and voltage conditions without using the battery.- Resettable circuit breakerEasy recovery from overloads; no need to replace a fuse.- Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.Manageability- Network manageableProvides remote power management of the UPS over the network.- Serial connectivityProvides management of the UPS via a serial port.- SmartSlotCustomize UPS capabilities with management cards.- LED status indicatorsQuickly understand unit and power status with visual indicators.- InfraStruXure Manager CompatibleEnables centralized management via the APC InfraStruXure Manager.Adaptability- Plug-and-Play external batteriesEnsures clean, uninterrupted power to the loads when adding extra runtime to the UPS.- Flash upgradeable firmwareInstall maintenance releases of firmware remotely using FTP.- Rack/Tower convertibleProtects the initial investment in the UPS when migrating from tower to rack-mount environment.Availability- Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.- Automatic internal bypassSupplies utility power to the connected loads in the event of a UPS power overload or fault.- Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.- Scalable runtimeAllows additional run time to be quickly added as needed.- Automatic restart of loads after UPS shutdownAutomatically starts up the connected equipment upon the return of utility power.- Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replacedMarketing Features- Avoids costly power problems by keeping your IT equipment and data protected and available.Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events.- Low operating and maintenance costs with proven reliability and intelligent battery management.Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.- Save time with easy and convenient remote accessibility.Network manageable via serial, USB or optional Ethernet. Includes Powerchute® Network Shutdown Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.- Peace of mind that comes with full equipment compatibility and reliability of a leaderProvides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.

GVX1500K1500HS Features- Galaxy VX 1500kVA, 400V, Start up 5x8- Highly efficient, scalable, 3-phase power protection with flexible operating modes and ECOnversion for large facilities, data centers, and business critical applications.- Includes: Installation guide, Start-Up Service

Parallel-redundant capablePower the connected equipment with multiple uninterruptible power supplies to increase system redundancyParallel-capacity capableIncreases total power capacity by using multiple uninterruptible power supplies simultaneously.Internal backfeed protectionIncreases system defense from power anomalies.Energy storage flexibilityConventional flooded and modular battery offer along with different charging modes allows tailoring to specific back-up requirements.Compatible with Schneider Electric's lithium ion battery solutionReduces system footprint and weight, cooling and maintenance requirements, and total cost of ownership; offers double the life of VRLA batteries; and improves backup storage predictability and manageability.Total cost of OwnershipRobust operationNo power derating in kW up to 40 degrees C or 104 degrees F.Input Power Factor CorrectionMinimizes installation costs by enabling the use of smaller generators and cabling.Wide input voltage rangeDesigned for harsh electrical environments to save battery life.ECOnversion modeOperating mode that ensures ultra high efficiency while charging the batteries, conditioning the load power factor and ensuring a Class 1 output voltage regulation.ECO ModeOperating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protectionServiceabilityFront-access servicingSimplifies installation and UPS maintenance while minimizing space requirements.Multiple levels of serviceWith the option of packages or individual service components, our services are structured to allow you to pick and choose what you would like APC to do for you.StruxureWare Data Center Expert compatibleEnables centralized management via StruxureWare Data Center Expert.StruxureOn enabledSimplify maintenance and operation of your equipment through the use of vendor-neutral, cloud-based software and services.5x8 Start-up service includedRequired for full coverage of factory warranty