Showing 120–130 of 370 results

Symmetra PX 100kW Scalable to 100kW, 208V with Startup, No Battery- Adjustable voltage sensitivityProvides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.- Adjustable voltage-transfer pointsMaximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.- Advanced electrical featuresExcellent power conditioning, very low harmonic distortion through IGBT rectifier, input power factor correction, and high power efficiency- Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.Total Cost of Ownership- Input power factor correctionMinimizes installation costs by enabling the use of smaller generators and cabling.- Generator compatibleEnsures clean, uninterrupted power to protected equipment when generator power is used.- 5x8 Start-up service includedRequired for full coverage of factory warranty- Fully-rated power kVA equals kWReduces cost by eliminating the need for an oversized UPS for Power Factor Corrected (PFC) loads.Agility- Programmable frequencyEnsures compatibility with different input frequencies.- Scalable power capacityReduces UPS over-sizing costs today by allowing quick power upgrades, within the same footprint, later.- SmartSlotCustomize UPS capabilities with management cards.Sustainability- ENERGY STAR for UPSEstablishes that the efficiency of the UPS is in the top 25% of the market as verified by third party testing- EU CoC for UPSEnsures that UPSs sold in the EU are highly efficientManageability- LED status indicatorsQuickly understand unit and power status with visual indicators.- Audible alarmsProvides notification of changing utility power and UPS power conditions- Integrates with StruxureWare Data Center ExpertAn IT-ready, scalable access monitoring system that collects, organizes, and distributes critical alerts, surveillance video and key information, providing a unified view of complex physical infrastructure environments from anywhere on the networkMarketing Features- Battery modules connected in parallelDelivers higher availability through redundant batteries.- Configurable for N+1 internal redundancyProvides high availability through redundancy by allowing configuration with one more Power Module than is necessary to support the connected load.- Generator compatibleEnsures clean, uninterrupted power to protected equipment when generator power is used.- Scalable power capacityReduces UPS over-sizing costs today by allowing quick power upgrades, within the same footprint, later.- Power Modules connected in parallelEnhances availability by allowing immediate, seamless recovery from isolated module failures.- User-replaceable power modulesEnables simple upgrades and replacements of the Power Modules.- Modular designProvides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.- Network manageableProvides remote power management of the UPS over the network.- User-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)- Fully-rated power kVA equals kWReduces cost by eliminating the need for an oversized UPS for Power Factor Corrected (PFC) loads.Availability- Configurable for N+1 internal redundancyProvides high availability through redundancy by allowing configuration with one more Power Module than is necessary to support the connected load.- Redundant Intelligence ModulesProvides higher availability to the UPS connected loads by giving redundant communication paths to critical UPS functions.- Power Modules connected in parallelEnhances availability by allowing immediate, seamless recovery from isolated module failures.- Swappable power modulesAllows quick addition of power capacity or replacement of existing power modules. Installed modules are automatically recognized by the system.- Modular designProvides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.- Network manageableProvides remote power management of the UPS over the network.- Automatic internal bypassSupplies utility power to the connected loads in the event of a UPS power overload or fault.

APC SMT1000CUS

APC Smart-UPS X, Line Interactive, 3kVA, Rack/tower convertible 2U, 100V-127V, 3x 5-15R+3x 5-20R+1x L5-30R NEMA,NMC, Extended runtime,10ft input cord

APC Smart-UPS 750VA 120V Shipboard

Intuitive LCD interfaceProvides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.Predictive replace battery dateDynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.Green modePatent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.Energy meterProvides actual kilowatt hours of usage for energy conscious users.Outlet group controlTurn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPSs with switched outlet groups).Sequenced shutdown and restartConfigure select outlet groups to shut down and turn on in a pre-determined order (for UPSs with switched outlet groups).InfraStruXure Central compatibleEnables centralized management via APC InfraStruXure® Central.Pure sine wave output on batterySimulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.Single switched outlet groupSingle outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.Sine wave outputEliminates humming and heat generated when powering tubelights and fans.Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenanceLED IndicatorsProvide easy-to-read status of the unit and utility power conditions.Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replacedDisconnected battery notificationWarns when a battery is not available to provide backup power.

APC Galaxy VS GVSUPS20K0B4HS is a reliable 20kVA three-phase uninterruptible power supply designed to protect critical systems in demanding environments. Engineered by Schneider Electric, this UPS delivers consistent, high-quality power while maximizing energy efficiency and minimizing operational costs.

DescriptionWith Smart-UPS™ Ultra you can put up to 2200W of power protection in places never before possible. At half the size and weight of comparable UPS the mounting brackets can be used in any of the 5 mounting styles: rack (2 and 4 post), tower, wall, ceiling and desk under mount. The auto-rotating touch screen display makes switching between horizontal and vertical mounting options instantaneous. 230V and 208V user selectable output. Lithium-ion batteries provide reduced maintenance cost with 3x the battery life. EcoStruxure Ready Smart-UPS provide visibility anywhere, anytime.

High availability, ruggedized power protection for shipboard and other transportation applications.

Symmetra PX 100kW Scalable to 250kW with Left Mounted Maintenance Bypass and DistributionInfraStruXure Central compatibleEnables centralized management via APC InfraStruXure® Central.Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenanceModular designIncreases adaptability with an open architecture configurable to any IT environment.Modular designModular construction - can be deployed as a non-standby and migrate to a standby (UPS) system.Dual mains inputIncreases availability by allowing the UPS to be connected to two separate power sources.SmartSlotCustomize UPS capabilities with management cards.Hot-swappable intelligence modulesEnsures clean, uninterrupted power to protected equipment during Intelligence Module replacement.Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replacedConfigurable for N+1 internal redundancyProvides high availabilty through redundancy by allowing configuration with one more Power Module than is necessary to support the connected load.Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.Battery modules connected in parallelDelivers higher availability through redundant batteries.Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.

This APC Smart-UPS is designed for IT professionals or network administrators to maintain business uptime and continuity. This 6kVA on-line 4U rackmount UPS provides pure sine wave power and extended runtime to support critical electronics during power disruptions. It comes with hard wire 3-wire (1P+N+E) input, 6x IEC 320 C13 and 4x IEC 320 C19 outlets, and 2x IEC jumper cables. The UPS has an embedded Network Management Card for UPS network-based monitoring and management. The UPS comes with PowerChute Network Shutdown that provides graceful shutdown of physical servers, virtual machines, and HCI clusters. It has an additional SmartSlot for optional accessory card such as Dry Contact I/O card. The UPS can connect to EcoStruxure IT or third-party centralized management platforms. The UPS has a 3-year warranty, and the built-in lead-acid battery has a 2-year warranty.