Showing 110–120 of 958 results

Intuitive LCD interfaceProvides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.High frequency designReduces or eliminates bulky transformers resulting in lighter units for ease of handling.Auto recognition of external batteriesUPS recognizes when external battery packs are attached and automatically adjusts runtime.Predictive replace battery dateDynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.Green modePatent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.Energy meterProvides actual kilowatt hours of usage for energy conscious users.Outlet group controlTurn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPSs with switched outlet groups).Load sheddingTurn off select outlet groups in a pre-determined sequence to shed less critical equipment and conserve runtime (UPSs with switched outlet groups).Pure sine wave output on batterySimulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.Multiple switched outlet groupsMultiple outlet groups that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.Wide input voltage rangeDesigned for harsh electrical environments to save battery life.StruxureWare Central compatibleEnables centralized management via StruxureWare Central.Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenanceHigh online efficiencyReduces utlility costs, generates less heat.LED IndicatorsProvide easy-to-read status of the unit and utility power conditions.Overload protectionSafeguards unit from damage by automatically turning it off in the event of a short circuit or overload.SmartSlotCustomize UPS capabilities with management cards.Cold-start capableProvides temporary battery power when the utility power is out.Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replacedDisconnected battery notificationWarns when a battery is not available to provide backup power.Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.Automatic restart of loads after UPS shutdownAutomatically starts up the connected equipment upon the return of utility power.Adjustable voltage-transfer pointsMaximizes useful battery life by widening the input voltage window or tightening the output voltageregulation.Adjustable voltage sensitivityProvides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.Audible alarmsProvides notification of changing utility power and UPS power conditionsUser-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)USB connectivityProvides management of the UPS via a USB port (not available on all models).Serial ConnectivityProvides management of the UPS via a serial port.Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.Boost and Trim Automatic Voltage Regulation (AVR)Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).Scalable runtimeAllows additional run time to be quickly added as needed.Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.Rack/Tower convertibleProtects the initial investment in the UPS when migrating from tower to rack-mount environment.Power conditioningProtects connected loads from surges, spikes, lightning, and other power disturbances.Network manageableProvides remote power management of the UPS over the network.Frequency and voltage regulationGives higher application availability by correcting poor frequency and voltage conditions without using the battery.Predicitive failure notificationProvides early-warning fault analysis ensuring proactive component replacement.Sequenced network shutdown and rebootCustomize network shutdown and reboot sequence of connected servers and UPSs.

Rack PDU 2G, Metered, ZeroU, 14.4Kw, 208V, (36) C13 & (12) C19

APC RBC5. Battery technology: Sealed Lead Acid (VRLA). Weight: 10.9 lbs (4.95 kg), Dimensions (WxDxH): 3.7 x 5.1 x 5.9" (94 x 129.5 x 149.9 mm)

APC Metered Rack PDUs offer resilient power distribution and actively measure, display, and log volts, amps, real power (kW) & energy (kWh). This 3 phase PDU offers LCD display, real-time remote monitoring and user-defined alarms to help prevent circuit overloads that can cause accidental power loss to critical equipment. Historical reporting enables users to meter customer power usage, optimize energy use as well as plan for capacity . This zeroU PDU can operate at up to 60 degrees Celsius and can be accessed, configured, and managed remotely via EcoStruxure IT, Web, SNMP and Command Line Interface. Power is supplied to the PDU via IEC 309 3P+N+PE plug with a 1.8m (16 ft) cord while power comes out at 230 volts through (36) C13 and (6) C19 locking outlets. It integrates with EcoStruxure IT, and daisy-chaining is supported to monitoring up to 4 PDUs from 1 IP address as well as a local USB port for easy local firmware updates As a Green Premium product, this unit comes with a verified product environment profile, including carbon footprint, scope 3 emissions and end of life instructions.

APC Smart-UPS SRT 2200VA RM 120V- High density, double-conversion on-line power protection with scalable runtime- Includes : CD with software , Documentation CD , Installation guide , Rack Mounting brackets , Rack mounting hardware , Rack Mounting support rails , USB cable , Warranty card- Battery failure notification- Provides early-warning fault analysis on batteries enabling timely preventive maintenance- ECO Mode- Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection- LCD graphics display- Text and mimic diagrams that display modes of operation, system parameters and alarms.- Rack/Tower convertibleAvailabilityAutomatic restart of loads after UPS shutdownAutomatically starts up the connected equipment upon the return of utility power.Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replacedIntelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.Scalable runtimeAllows additional run time to be quickly added as needed.Automatic internal bypassSupplies utility power to the connected loads in the event of a UPS power overload or fault.Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.Protects the initial investment in the UPS when migrating from tower to rack-mount environment.ManageabilitySmartSlotCustomize UPS capabilities with management cards.LED status indicatorsQuickly understand unit and power status with visual indicators.InfraStruXure Manager CompatibleEnables centralized management via the APC InfraStruXure Manager.Serial connectivityProvides management of the UPS via a serial port.Network manageableProvides remote power management of the UPS over the network.AdaptabilityFlash upgradeable firmwareInstall maintenance releases of firmware remotely using FTP.Rack/Tower convertibleProtects the initial investment in the UPS when migrating from tower to rack-mount environment.Plug-and-Play external batteriesEnsures clean, uninterrupted power to the loads when adding extra runtime to the UPS.Marketing FeaturesLow operating and maintenance costs with proven reliability and intelligent battery management.Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.Avoids costly power problems by keeping your IT equipment and data protected and available.Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events.Peace of mind that comes with full equipment compatibility and reliability of a leaderProvides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.Save time with easy and convenient remote accessibility.Network manageable via serial, USB or optional Ethernet. Includes Powerchute® Network Shutdown Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.ServiceabilityAutomatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.User-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)Audible alarmsProvides notification of changing utility power and UPS power conditionsDisconnected battery notificationWarns when a battery is not available to provide backup power.Predicitive failure notificationProvides early-warning fault analysis ensuring proactive component replacement.ProtectionGenerator compatibleEnsures clean, uninterrupted power to protected equipment when generator power is used.Input power factor correctionMinimizes installation costs by enabling the use of smaller generators and cabling.Power conditioningProtects connected loads from surges, spikes, lightning, and other power disturbances.Frequency and voltage regulationGives higher application availability by correcting poor frequency and voltage conditions without using the battery.Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.Cold-start capableProvides temporary battery power when the utility power is out.Resettable circuit breakerEasy recovery from overloads; no need to replace a fuse.

Accessory solutions to tailor the Smart-UPS to meet your specific needs.

APC Basic Rack 4160VA. Product color: Black. Input connection type: NEMA L6-20P, Output connections: (20) IEC 320 C13 (4) IEC 320 C19. Cable length: 120.1" (3.05 m). Nominal input voltage: 208 V, AC input frequency: 50 - 60 Hz, Nominal output voltage: 208 V. Certification: cUL,CSA C22.2 No. 60950-1-03,UL 60950-1,UL

The Back-UPS Pro BR24BPG UPS (sold separately) provides instant battery power to your critical electronics when the power goes out, reducing risk of damage and keeping you connected and available both personally and professionally. When power availability is of the utmost importance, the BR24BPG Extended Run Battery Pack keeps your computer, network, or gaming systems running longer during a power outage. The BR24BPG features four 9Ah 24-volt batteries to complement the BR1500G’s two. Adding this extended run battery pack to your Back-UPS Pro system dramatically increases total runtime for added convenience and peace of mind. The BR24BPG is the perfect match for the BR1500G UPS. A heavy-duty connector links the two, and the BR1500G automatically recharges the additional UPS battery pack. Complementary styling ensures a consistent look. The BR24BPG UPS battery pack is covered by a two-year limited warranty. Package Contains APC BR24BPG Extended Run Battery Pack for Home UPS and user manual.

High density, double-conversion on-line power protection with scalable runtime.- Generator compatible- Cold-start capable- Power conditioning- Frequency and voltage regulation- 208/240V to 120V Step-Down Transformer- Resettable circuit breaker- Safety-agency approved- Network manageable- Low operating and maintenance costs with proven reliability and intelligent battery management- Avoids costly power problems by keeping your IT equipment and data protected and available- Peace of mind that comes with full equipment compatibility and reliability of a leader- Save time with easy and convenient remote accessibility

APC Metered by Outlet with Switching Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and individual outlet power metering. Remote outlet level controls allow power on/off functionality for power recycling to reboot locked-up equipment and to avoid unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, and locking IEC receptacles. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by Struxureware for Data Centers using Data Center Expert and Data Center Operations with Capacity and Change modules.Includes : Installation guide , Rack Mounting brackets , Safety guide , Serial configuration cable