Showing 100–110 of 958 results

APC Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization and circuit protection. User-defined alarm thresholds mitigate risk with real-time local and remote alerts to warn of potential circuit overloads. Metered Rack PDUs provide power utilization data to allow Data Center Managers to make informed decisions on load balancing and right sizing IT environments to lower total cost of ownership. Metered Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers. Users can access and configure Metered Rack PDUs through secure Web, SNMP, or Telnet Interfaces which are complimented by APC Centralized Management platforms using InfraStruxure Central, Operations, Capacity, and Energy Efficiency.

APC Smart-UPS Lithium-Ion, Short Depth 500VA, 120V

APC Smart-UPS 2200VA LCD RM 2U 120V with L5-20PReliable network power protection designed for deployment in retail and open access environments.Includes : CD with software , Documentation CD , Rack Mounting brackets , Rack Mounting support rails , Smart UPS signalling RS-232 cable , USB cable- Cold-start capableProvides temporary battery power when the utility power is out.- Energy meterProvides actual kilowatt hours of usage for energy conscious users.- Green modePatent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.- High online efficiencyReduces utlility costs, generates less heat.- Intuitive LCD interfaceProvides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.- Predictive replace battery dateDynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.- Pure sine wave output on batterySimulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.- Sequenced network shutdown and rebootCustomize network shutdown and reboot sequence of connected servers and UPSs.- Single switched outlet groupSingle outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.- SmartSlotCustomize UPS capabilities with management cards.- StruxureWare Data Center Expert compatibleEnables centralized management via StruxureWare Data Center Expert.- Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.

This APC Switched Rack PDU power distribution unit has a wide range of standardized PDU features that increase network efficiency, manageability and functionality. The output and input connections are (8)C13. Network management capabilities allow you to configure and manage rack PDUs from remote locations. It has has a local current monitoring display that gives a visible warning in case of an overload. The remote individual outlet control provides real-time monitoring of connected loads. It has a multi-tier user access that enables you to restrict unauthorized use of outlets. This rack has a single input power source making it easy to install.

Reliable Backup Power and Protection for Your Valuable IT Equipment Protect your servers, switches, routers and networking devices while providing battery backup power with Smart-UPS SMT2200RM2UC with APC SmartConnect, the first cloud-enabled UPS for distributed IT. The service-free cloud monitoring feature is accessible from any internet-connected device, and maximizes the life and performance of your UPS by providing proactive advice and life-cycle recommendations so you can remotely monitor your power infrastructure from anywhere. An Overview of Smart-UPS and the SmartConnect App APC SmartConnect makes Smart-UPS more adaptable and easier to deploy than ever before, enabling you to view the status of your UPS through a secure web portal. Through this intuitive remote management interface, you’ll receive automatic notifications, firmware updates, and advanced support; providing you with added value – and more importantly – added peace of mind. Secure, remote monitoring Connected Smart-UPS support remote monitoring through a secure web portal, so you can always be up to date on the status of your power infrastructure. Proactive lifecycle alerts Maximize the life span of the UPS and protect your investment with proactive alerts for firmware upgrade, device maintenance, and warranty protection. Cloud enabled as standard Smart-UPS models with SmartConnect are cloud-enabled and have a built-in Ethernet port, making it easy and cost effective to monitor your UPS online. Simple to Use Interface Our simple web interface is designed to support both system administrators and non-tech users alike, with clear notifications in plain language.

Intuitive LCD interfaceProvides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.High frequency designReduces or eliminates bulky transformers resulting in lighter units for ease of handling.Auto recognition of external batteriesUPS recognizes when external battery packs are attached and automatically adjusts runtime.Predictive replace battery dateDynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.Green modePatent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.Energy meterProvides actual kilowatt hours of usage for energy conscious users.Outlet group controlTurn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPSs with switched outlet groups).Sequenced shutdown and restartConfigure select outlet groups to shut down and turn on in a pre-determined order (for UPSs with switched outlet groups).Load sheddingTurn off select outlet groups in a pre-determined sequence to shed less critical equipment and conserve runtime (UPSs with switched outlet groups).APC USB communicationsEnables communication with Smart-UPS RTD, SMX and SMT using the APC's historical proprietary USB usagesInfraStruXure Central compatibleEnables centralized management via APC InfraStruXure® Central.

APC is the industry leader in network and server UPSsSmart-UPS with lithium-ion batteries saves up to 47% in Total Cost of Ownership (TCO) over the lifetime of the UPS. Battery life is increased 2X. Reduced maintenance cost and improved battery performance in temperatures up to 104°F. UPS management options include Powerchute Business Edition, APC SmartConnect, Network Management Cards and EcoStruxure IT. The additional benefit of a 12-inch short-depth chassis allows this UPS to be installed in any 4-post rack and most wall-mount racks. The APC Smart-UPS Lithium-ion (Li-ion) UPS provides pure sine wave output power protection for servers, voice/data networks, medical labs and light industrial applications. As one of the world’s largest and most respected power protection designers and manufacturers, APC is relied upon daily for power protection and availability. APC products offer the maximum level of protection, safety, convenience, and reliability. Everything you love about Smart-UPS now with lithium-ion batteries! APC is the industry leader in network and server UPS- Lithium-Ion battery provides twice the services life of the lead-acid batteries typically used in (Uninterruptible Power Supplies) UPS- Intelligent battery management system Li-ion batteries are monitored at an individual cell level to manage voltage and temperatures of the set of cells. This helps the Li-ion batteries to provide a higher level of safety. - High-efficiency green mode Achieves up to 97% percent efficiency, which minimizes utility and cooling costs without compromising performance or reliability. Smart-UPS SMTL1500RM3UC- Alphanumeric LCD Display Intuitive interface provides detailed and accurate information with ability to configure locally-function LCD display- Built-in energy meter Measures energy use and displays UPS efficiency in various modes of operation for easy energy tracking.- Flash upgradeable firmware Allows for field updates of firmware via communication ports or Network Management Card (NMC)Smart-UPS SMTL1500RM3UCSwitchable outlet group Ability to control a group of output load receptacles independent from the main UPS. Enables:- Cycling the entire UPS- Sequenced turn ON/OFF- Shedding of noncritical loads based on a variety of parameters (battery time, runtime remaining, and overload)- Scheduled time OFF to conserve energy- Rebooting hung device without

Extend runtimeBy connecting one or more APC Smart-UPS On-Line SRT external battery packs to the corresponding APC Smart-UPS On-Line SRT, you can easily increase the number of minutes that the APC UPS can independently supply emergency power. A runtime of several hours is even possible.Extend lifespanThe SRT96RMBP contains two (APCRBC152) internal battery cartridges and these can be easily, safely and independently replaced by the user. This without having to disconnect the SRT96RMBP or switch off the corresponding APC SRT UPS and/or connected equipment. This way you can easily and cheaply extend the lifespan of the external APC battery pack and your equipment always remains online.Easy to useYou can easily connect an APC Smart-UPS On-Line SRT external battery pack to the UPS or to another SRT96RMBP using the included connector.Warranty ExtensionThe factory warranty of the SRT96RMBP is 2 years and can be upgraded to 5 years with the APC service pack (WBEXTWAR3YR-SP-04).This product is part of the Smart-UPS battery systems, providing extended runtime to SRT mission critical applications. This extendable-run battery pack provides extended runtime during prolonged power outages. Embedded monitoring at the cell, module, and cabinet level provides data of battery runtime and health. It is a lead-acid battery with a 2-year warranty. Its dimensions are 594mm (depth) x 432mm (height) x 85mm (width) and weighs 40.6kg. Ideal for Smart-UPS on-line mission critical applications. It conforms to OSHPD.

Genuine APC RBC(TM) are tested and certified for compatibility to restore UPS performance to the original specifications.Includes: All required connectors, Battery recycling guide, Metallic battery tray or enclosureConveniencePrepaid postage to a nearby recycling partner (availability varies by country)Insures that almost 100% of the old battery is recycled, protecting the environment.Fully assembled for easy hot-swap installationAPC RBCs are safe, reliable and contain a minimum number of connections saving valuable time. Because APC RBCs are hot-swappable, no network downtime is required in order to install them.Re-usable packaging with clear instructions on how to properly dispose of spent batteries.Convenient, easy and green.CompatiblityGuaranteed UPS compatibilityTested and approved to restore the performance of your APC UPS. Maintains UPS safety certifications (UL, VDE, CSA) and lifetime equipment protection policy (as applicable).Long battery lifeDesigned by APC by Schneider Electric exclusively for APC UPS's for complete compatibility with the intelligent battery management system.

Extend runtimeBy connecting one or more APC Smart-UPS On-Line SRT external battery packs to the corresponding APC Smart-UPS On-Line SRT, you can easily increase the number of minutes that the APC UPS can independently supply emergency power. A runtime of several hours is even possible.Extend lifespanThe SRT192RMBP contains two (APCRBC140) internal battery cartridges and these can be easily, safely and independently replaced by the user. This without having to disconnect the SRT192RMBP or switch off the corresponding APC SRT UPS and/or connected equipment. This way you can easily and cheaply extend the lifespan of the external APC battery pack and your equipment always remains online.Easy to useYou can easily connect an APC Smart-UPS On-Line SRT external battery pack to the UPS or to another SRT192RMBP using the included connector. Thanks to the included 4-post rail kit, you can easily mount it in a rack.Warranty extensionThe factory warranty of the SRT192RMBP is 2 years and can be upgraded to 5 years with the APC service pack (WBEXTWAR3YR-SP-04).This product is part of the Smart-UPS battery systems, providing extended runtime to SRT mission critical applications. This extendable-run battery pack provides extended runtime during prolonged power outages. Embedded monitoring at the cell, module, and cabinet level provides data of battery runtime and health. It is a lead-acid battery with a 2-year warranty. Its dimensions are 683mm (depth) x 432mm (height) x 130mm (width) and weighs 91.0kg. Ideal for Smart-UPS on-line mission critical applications. It conforms to OSHPD.