Showing 390–400 of 676 results

Add two RS232 serial ports to any system with an available USB motherboard headerThe ICUSB232INT2 USB to Serial Adapter lets you add 2 RS232 ports to any desktop system that is equipped with an available USB motherboard header. Unlike standard USB to serial cables, this cable is designed for use inside the PC case, affording an entirely internal solution with no mess or extra adapters needed. This compact and simple USB adapter offers a cost-effective solution that bridges the compatibility gap between modern computers and legacy serial peripherals. Backed by a StarTech.com 2-year warranty and free lifetime technical support.The StarTech.com Advantage

Turn an mSATA host connection into a standard SATA portThe MSAT2SAT3 mSATA to SATA adapter enables you to connect a standard SATA drive to an available mSATA port.The adapter improves system capacity by enabling an mSATA port to host a larger SATA hard drive (tested up to 4TB). For guaranteed compatibility and performance the adapter is compliant with SATA I/II/III revisions, allowing for transfer speeds up to 6Gb per second.The MSAT2SAT3 is backed by a StarTech.com 2-year warranty and free lifetime technical support.The StarTech.com Advantage

Add a Variable Speed, PWM-Controlled Cooling Fan to a Computer CaseThe FAN8025PWM 80mm PWM Case Fan adds an efficient air cooling solution to computer cases or other enclosures, to keep components running optimally.With Pulse Width Modulation (PWM) technology, the fan speed can be dynamically controlled by the motherboard, so the fan runs at a speed that suits the operating conditions - lowering power consumption and fan noise when the system is idle, and delivering maximum cooling under full load conditions.Backed by a StarTech.com 2-year warranty and free lifetime technical support.The StarTech.com Advantage- PWM control enables the fan to be controlled by the motherboard according to current system requirements, ensuring optimal system performance- Ever Lubricate bearing design increases reliability and lifespan over fans with a traditional sleeve bearing design- Backed by a StarTech.com 2-year warranty and free lifetime technical support

Wall-mount your server or networking equipment with a hinged rack design for easy access and maintenanceThe RK819WALLOH 8U Hinged Open Frame Wall Mount Server Rack lets you wall mount your (19-inch wide) servers, A/V or network equipment and features a hinged rack design that allows the entire frame to swing open for easy installation and maintenance of your equipment. This TAA compliant product adheres to the requirements of the US Federal Trade Agreements Act (TAA), allowing government GSA Schedule purchases.The 8U wallmount rack offers a 4 post design for additional support of your equipment, storing a maximum weight capacity of 63 kg (139 lbs) with a maximum mounting depth of 19.8inch. Constructed of high-quality SPCC cold-rolled steel for strength and durability, the open frame wallmount server rack allows for maximum airflow, and ships complete with all of the rack screws and cage nuts required to mount your equipment, saving the expense of purchasing them separately.The StarTech.com Advantage

Improve the organization and appearance of your rack while maintaining airflowYou can improve the appearance and airflow of any standard 19-inch server rack while still enjoying easy access to unused space, using this 6U hinged blanking panel. This TAA compliant product adheres to the requirements of the US Federal Trade Agreements Act (TAA), allowing government GSA Schedule purchases.Professional lookThe blanking panel creates a clean and professional look by covering empty space and visible cables. Adding blanking panels to your server racks offers a tidier appearance for a more organized server room.Maximize airflowThe blanking panel features a vented design enabling unobstructed airflow through your rack. The vented panel maximizes airflow to help ensure your equipment is running at an optimal temperature.Hassle-free accessWith a hinged design, you can quickly open the blanking panel, make your required adjustments and when you're finished, simply close the panel to restore the professional appearance and order of your server room. The panel is reversible, so you to install it on the left or the right side of your rack, to best suit your needs. The rack panel also comes complete with rack installation screws and nuts, giving you everything you need to ensure a hassle-free installation.The RKPNLHV6U is backed by a 2-year StarTech.com warranty and free lifetime technical support.The StarTech.com Advantage

Install a motherboard into a computer case with #6-32 threaded mounts and M3 screwsThis pack of 50 Metal Jack Screw Standoffs are great to have on hand for new system builds, repairs or upgrades - the ideal solution for mounting any motherboard to your pre-tapped PC chassis.The StarTech.com Advantage- M3 tapped standoff with #6-32 threaded screw for easy conversion from a #6-32 tapped motherboard tray

Add a vented, sliding shelf with integrated cable management into virtually any server rack or cabinetThe UNISLDSHF192 Adjustable Sliding Rack Shelf lets you add a vented, sliding shelf with cable management into virtually any 4-post server rack or cabinet. This TAA compliant product adheres to the requirements of the US Federal Trade Agreements Act (TAA), allowing government GSA Schedule purchases.The adjustable mounting depth design allows the shelf to be installed easily into server cabinets with mounting depths from 27.7in (702.2mm) to 31.6in (802.2mm). The sliding rails also offer a locking mechanism to stop the shelf from sliding out too far, or sliding back into the rack before maintenance is complete.Offering a weight capacity of up to 50 lbs (22.7 kg), this sliding rack shelf features a ventilated, cold-rolled steel construction for increased airflow and durability in your server room or wiring closet installations.For ease in routing cables neatly through your rack, we've included a reversible cable management arm that can be attached to the back of the shelf, plus an adjustable bezel to keep your equipment where you want it on the shelf.Backed by a StarTech.com 2-year warranty.The StarTech.com Advantage

Wall mount a patch panel or network switch while providing hinged access to the back of the deviceThe WALLMOUNTH1 1U 19in Hinged Wall Mounting Bracket for Patch Panels is 4in deep and sturdily designed to provide a dependable solution for mounting a patch panel, or other slim 19in networking equipment to a wall.The patch panel wall mount features a hinged design for easy access to configuration buttons, ports and cables. The wall mounting holes are spaced 16 in. apart, making it suitable for mounting on almost any wall, based on common wall-frame stud spacing.Backed by a StarTech.com 2-year warranty.The StarTech.com Advantage

Vastly increase system performance by adding a dual mSATA SSD RAID array into any 2.5" SATA HDD application with the 25SAT22MSAT mSATA to SATA adapter.Utilize the full potential of your SATA III controller, with mSATA SSDs reducing your data transfer bottleneck with file transfer speeds up to 6 Gbps. mSATA SSDs also save you money by reducing your power consumption over regular platter drives.You can achieve greater SSD capacity, or data redundancy with the Dual SSD controller supporting multiple RAID modes (RAID 0, 1, BIG). The SSD adapter also supports non-RAID operation (JBOD) when paired with a port-multiplying SATA controller, so both drives can be used independent of one another.Help protect the health of your drive with an open-frame design ensuring maximum heat dissipation.The 25SAT22MSAT is backed by a StarTech.com 2-year warranty, and lifetime technical support.The StarTech.com Advantage- Maximize system speed by adding SSD performance- Achieve greater drive capacity, or secure data redundancy with multiple RAID modes- Reduce overall power consumption, with high efficiency mSATA SSDs

Improve the cooling flow and appearance of your racks and cabinets by filling the gaps between equipmentThe BLANKB2 2U Rack Blank Panel for 19in Server Racks and Cabinets is designed to EIA RS-310-C specifications and fits all 19" standard server racks and cabinets.Ideal for improving airflow within the rack by covering the unused spaces, the filler panel/blank panel is constructed of cold-rolled steel and features a black powder coated finish that matches most industry standard black server cabinets and racks.The StarTech.com Advantage- Low cost individual units means you can buy exactly the right number for your rack needs