The AT-SPFX offers a short-haul option to extend your network to 15km The AT-SPF series SFPs are compatible with a limited number of SFP compatible products.Call or check with your Allied Telesis sales rep for details.
Overview The AT-WLMT is a simple metal bracket that allows the majority of Allied Telesis’ range of standalone media and converters and rate (bridging) converters to be wall-mounted. Mounting Option Requirements The majority of media converters are used to convert fiber optic connections to copper. Many installations require these media converters to be installed in a 19-inch chassis, using a range of mounting options including AT-TRAY1,AT-TRAY2 and the AT-MCR12. However, other applications such as Fiber-To-The-Home (FTTH), etc, require a small un-obtrusive mounting option that can be discretely placed on a wall or under a table top.The AT-WLMT was designed to meet this demand. Simple Installation Each AT-WLMT has two circular holes and two ‘key’ slots on the base.The use of the circular holes allows two countersunk screws to mount the bracket on a horizontal surface underneath a table top, whilst the two key slots allow the bracket to be easily wall-mounted. Security Any media converter or rate (bridging) converter mounted in an AT-WLMT chassis is held securely in place by means of a locking screw.This ensures that the media converter is not easily removed, thus helping to prevent accidental breakage of the fiber optic cable connected to the device, and also theft of the actual unit.
Allied Telesis AT-FS750/20-10. Switch type: Managed. Basic switching RJ-45 Ethernet ports type: Fast Ethernet (10/100), Basic switching RJ-45 Ethernet ports quantity: 20. MAC address table: 8000 entries, Switching capacity: 11.2 Gbit/s. Networking standards: IEEE 802.11d, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3ad, IEEE.... Rack mounting, Form factor: 1U
Allied Telesis AT-FS750/28PS-10. Switch type: Managed. Basic switching RJ-45 Ethernet ports type: Fast Ethernet (10/100), Basic switching RJ-45 Ethernet ports quantity: 28. MAC address table: 8000 entries, Switching capacity: 12.8 Gbit/s. Networking standards: IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE.... Power over Ethernet (PoE). Wall mountable, Rack mounting, Form factor: 1U
When a high-performing, resilient Enterprise backbone is required, 100G connections provide the ultimate in capacity and high-speed recovery when partnered with resilient ring protocols. The XEM-1CQ delivers this capability in a single port configuration per module, which can also be used as a stacking link.
10 Gigabit Mini Media Converters Mini media converters offer a smaller size and smaller carbon footprint to help the environment and save space in the office. The Allied Telesis MMC10G Series of mini media converters leverage their smaller size to not only help the environment with a small carbon footprint, but also to save space in the office. Despite its compact size, the MMC10G Series delivers all the power and functionality of standard size media converters. Extend Networks The MMC10G Series are available in 10G BASE-T to SFP+, and SFP+ to SFP+ configurations. The SFP+ connectors are capable of multi-mode or single-mode fiber connectivity. As well as 1G or 10G SFP’s, the twisted-pair copper port has a 1G/10G RJ45 connector with a maximum operating distance of 100 meters (328 ft) using Cat6a/7 cabling. VLAN Support Many new backbone switch products now support the industry-standard IEEE 802.1Q specification for Virtual LANs (VLANs) that send extra-long data packets on the network. The MMC10G Series are fully compatible with these long packets, enabling them to be used in modern networks. Media converters not supporting this feature discard these extra long packets, making them unsuitable for modern networks. Small and Flexible The smaller size and external power supply of the MMC10G Series allows them to be used almost anywhere. MissingLink (ML) The MissingLink™ (ML) feature monitors network connections allowing network managers to quickly identify the source and location of failed segments and minimize downtime. Smart Link Restoration Smart Link restoration allows the devices, in cases of power failure, link loss or other interrupted service, to automatically restore the link without the need to restart/reset them. Power Saving The MMC10G Series continues Allied Telesis commitment to the environment. Using only 4W of power, the MMC10G Series media converters are some of the most efficient in the market today. Loopback/Traffic Generator The MMC10G Series has a loopback function and Traffic Generator to help diagnose network connections. 1G/10G support The MMC10G supports both 1Gbps and 10Gbps media conversion. The speed must match on both ports -– either 1Gbps copper to fiber, or 10Gbps copper to fiber, conversion.
10 Gigabit Mini Media Converters Mini media converters offer a smaller size and smaller carbon footprint to help the environment and save space in the office. The Allied Telesis MMC10G Series of mini media converters leverage their smaller size to not only help the environment with a small carbon footprint, but also to save space in the office. Despite its compact size, the MMC10G Series delivers all the power and functionality of standard size media converters. Extend Networks The MMC10G Series are available in 10G BASE-T to SFP+, and SFP+ to SFP+ configurations. The SFP+ connectors are capable of multi-mode or single-mode fiber connectivity. As well as 1G or 10G SFP’s, the twisted-pair copper port has a 1G/10G RJ45 connector with a maximum operating distance of 100 meters (328 ft) using Cat6a/7 cabling. VLAN Support Many new backbone switch products now support the industry-standard IEEE 802.1Q specification for Virtual LANs (VLANs) that send extra-long data packets on the network. The MMC10G Series are fully compatible with these long packets, enabling them to be used in modern networks. Media converters not supporting this feature discard these extra long packets, making them unsuitable for modern networks. Small and Flexible The smaller size and external power supply of the MMC10G Series allows them to be used almost anywhere. MissingLink (ML) The MissingLink™ (ML) feature monitors network connections allowing network managers to quickly identify the source and location of failed segments and minimize downtime. Smart Link Restoration Smart Link restoration allows the devices, in cases of power failure, link loss or other interrupted service, to automatically restore the link without the need to restart/reset them. Power Saving The MMC10G Series continues Allied Telesis commitment to the environment. Using only 4W of power, the MMC10G Series media converters are some of the most efficient in the market today. Loopback/Traffic Generator The MMC10G Series has a loopback function and Traffic Generator to help diagnose network connections. 1G/10G support The MMC10G supports both 1Gbps and 10Gbps media conversion. The speed must match on both ports -– either 1Gbps copper to fiber, or 10Gbps copper to fiber, conversion.
100/1000/10G-T (RJ-45) SFP+, 20m/100m** Supports links up to 20m using Cat 6a/7 Cable for 10G and up to 100m for 100/1000T
MFR: Netgear, Inc
Qty: 1
Part #: GS105NA