Showing 160–170 of 586 results

40/100/400 GbE Cable Supports Higher Bandwidths Needed for High-Density Data NetworkingThe N858B-15M-3X8MG is a premium multimode fiber optic cable that supports 400 Gb Ethernet speeds for transmitting data and voice signals over short distances. It is designed to support higher bandwidths in cloud services, hyperscale data centers, telecom applications and equipment OEM companies. This multimode 50/125 OM4 cable is an ideal choice for 100 Gb Ethernet applications up to 100 meters (328 feet) at 850 nm. It is also backward compatible with 10 Gb and 25 Gb networks, so you can future-proof your current application for an eventual upgrade to 100 Gb or 400 Gb.Magenta-Colored Jacket Helps Avoid Misidentification That Can Cause Costly DowntimeThe OM4-rated cable has a magenta jacket to identify it as multimode in a crowded patch panel or switch and prevent it from becoming accidentally disconnected. The round low-smoke zero-halogen (LSZH) jacket limits the amount of toxic smoke emitted in case of combustion, making it suitable for poorly ventilated areas. The connectors’ slim boots and magenta housings allow easy one-handed installation and removal of the cable.

100 GbE Cable Supports Higher Bandwidths Needed for Data NetworkingAs the amount of traffic in data networks grows, so does the need for devices and fiber cables to support higher bandwidths in enterprise applications in wiring closets, telecom rooms and data centers. This singlemode 9/125 OS2 cable is an ideal choice for 100G Ethernet applications up to two meters (6.6 feet) at 1550 nm. It is also backward compatible with 10 Gb, 25 Gb and 40 Gb networks, so you can future-proof your current application for an eventual upgrade to 100 Gb.100% Tested for Low Insertion Loss and Back ReflectionThe 12-fiber MTP/MPO APC connectors with green housings help minimize back reflection with low insertion loss.Yellow Jacket Helps Avoid Misidentification That Can Cause Costly DowntimeThe OS2-rated cable has a yellow jacket to identify it as singlemode in a crowded patch panel or switch and prevent it from becoming accidentally disconnected. The round low-smoke zero-halogen (LSZH) jacket limits the amount of toxic smoke emitted in case of combustion, making it suitable for poorly ventilated areas.

Constructed with 50/125 micron cable Length - 10M Use on fiber and fibre channel installationsLC male to ST male connectorsHigher bandwidth optimized for gigabit and 10Gbps networksBackward compatible with 62.5 micron fiber Built-in headroom for future applications

This multimode duplex fiber optic MTRJ/ST Ethernet cable is manufactured from 62.5/125 zipcord fiber. The cable has MTRJ to ST connectors, a PVC jacket and is FDDI and OFNR rated. Duplex multimode fiber is most commonly used in LAN applications.

Manufactured from 62.5/125 duplex (zipcord) fiberPVC jacketLength: 5-meters (16.4ft) Connectors: MTRJ to 2 STInsertion loss testing performed on every connector (0.2db typical) and provided with cableBeveled edge on ends of glass makes insertion of plug a breezeFiber made from glass (not a polymer)Color coded shrouds identify transmit and receiveFiber optic distributed data interface (FDDI) ratedOFNR (riser rated)

OM4-Rated for 40/100 Gb Ethernet ApplicationsDesigned to extend high-density connections between network equipment in telecom rooms and data centersRecommended for patching between data center MDFs and IDFsOptimized for QSFP+ 40GBASE-SR4 and QSFP28 100GBASE-SR4 networksMagenta-colored for identification as an OM4 cableMTP/MPO Connectors with Push/Pull Tabs8-fiber female connectors 12 times denser than SC connectorsPush/pull tab connectors easy to install and remove with one hand100% tested for low insertion loss and back reflectionError-Free Signal Transfer50/125 duplex glass fiber constructionPlenum-rated jacket and bend-insensitive fiber perfect for ceilings, walls and ducts

Mini-LC to LC Fiber Patch Cable, 3 MeterDesigned for 10-Gig Ethernet applications...OM3 RatedFor use with networking hardware employing mini-LC SFP transceiversMax 10Gb distance of 300 meters @850nm Low-Smoke, Zero Halogen (LSZH) Aqua jacketUse with Brocade FC8-64 and other Mini-LC SFP devices

This 15-meter multimode duplex Fibre Channel SC/SC Ethernet cable is manufactured from 50/125 zipcord fiber. The cable has SC connectors on each end, a PVC jacket and is FDDI and OFNR rated. 50/125 Duplex multimode fiber is most commonly used in Fibre Channel applications. It is backward compatible with 62.5 micron fiber and built-in headroom for future applications. The cable provides higher bandwidth optimized for Gigabit and 10 Gbps networks as well. Also available in 1, 2, 3, 5, 10, 30 and 50 meter lengths. Search "N506-" to bring up all lengths. Also search "N516-" for SC-LC cables, and "N520-" for LC-LC cables.

This singlemode duplex fiber optic SC/ST Ethernet cable is manufactured from 9/125 zipcord fiber. The cable has ST connectors on one end, SC on the other, a PVC jacket, and is FDDI and OFNR rated. Duplex singlemode fiber is most commonly used in LAN applications.

This plenum-rated singlemode duplex fiber optic LC/ST Ethernet cable is manufactured from 9/125 zipcord fiber. The cable has LC connectors on one end, ST connectors on the other, and is FDDI and OFNR rated. Duplex singlemode fiber is most commonly used in LAN applications. Plenum cable is used in plenum return air chambers where local fir codes dictate the use of plenum-rated cable.