Showing 90–100 of 116 results

Extend the HDMI signal from your ST424HDBT* Matrix switch over Cat5e/Cat6 cable, with IR controlThis HDBaseT receiver works with the ST424HDBT HDMI matrix switch to extend an HDMI audio/video source up to 230ft (70m) over Cat5e/6 cabling. One STHDBTRX receiver unit is required for each individual remote display.Together with the ST424HDBT, the CAT5 HDMI receiver works to create a digital signage solution that eliminates the expense and hassle of running multiple devices with an HDMI matrix switch and extender in one clutter-free system. Because the signal is extended using standard Cat5e/6 Ethernet cables with RJ45 connectors, you can use your existing cabling infrastructure, without the additional cost of special cabling or connectors.For remote source operation, the HDMI receiver can also extend an Infrared signal from a remote control to operate either the display or the video source from either side or system, using the included IR extender and receiver cables.The STHDBTRX is backed by a StarTech.com 2-year warranty and free lifetime technical support.The StarTech.com Advantage

HDBaseT Extender Kit | 7.1 Audio | Mounting Hardware Included | Up to 70 m (230 ft.)This 4K HDMI extender uses HDBaseT to transmit your HDMI A/V signal to a remote location up to 70 m (230 ft.) away.Easy and Discreet InstallationThe transmitter in this HDMI HDBaseT extender kit features a small footprint and built-in HDMI cable that connects directly to your source for reduced clutter. It’s powered from a USB port on your source device, which makes it easier to install in areas where power outlets may be limited. Mounting hardware is included for the receiver for a discreet, professional installation.Get 4K Video at 130 ft. (40 m)This HDMI over CAT6 extender maintains your UHD 4K picture quality, even at 130 feet away from your video source. Because the extender is backward compatible with 1080p and lower resolutions at 230 feet away, you can comfortably use this extender to make any video source look great. The extender also supports 7.1 audio to ensure all audio channels are captured.Seamless Integration with Your Existing InfrastructureThe kit extends HDMI over a single cable, unlike some HDMI extenders that require two cables, reducing potential failure points and lowering your cabling costs. Ideal for digital signage, the HDMI over CAT6 extender uses standard CAT5e, CAT6 or CAT7 cables to extend HDMI video over the Ethernet infrastructure that's already in your building.The ST121HDBTDK is backed by a StarTech.com 2-year warranty and free lifetime technical support.The StarTech.com Advantage- Simple and versatile installation with a compact, USB-powered transmitter that features a built-in HDMI cable- Astonishing picture quality with support for UHD resolutions up to 4K- Easy integration with existing CAT5/CAT6/CAT7 infrastructure

Extend an S-Video signal with supporting audio up to 200 meters (650 feet) using Cat 5 cablingThe SVIDUTPEXTA S-Video Extender over Cat 5 with Audio lets you extend an S-video source signal up to 200 meters (650 feet), using standard Cat 5 UTP cabling.The S-Video over cat 5 extender is comprised of two extender units that can be used interchangeably - one is installed near the video signal source, the other to be placed near the desired display, up to an impressive 200m away. With no software or power adapter requirements, installation and setup is quick and hassle-free. The included installation/mounting kit, and 20cm S-Video cable offers added flexibility in the placement and usage of the device.Backed by a StarTech.com 2-year warranty and free lifetime technical support.The StarTech.com Advantage- Requires no software or power adapter, for a simple and hassle-free setup- The included wall mounting kit provides flexibility in the placement of the transmitter and receiver units- Cat5 extension design allows you to make use of existing Cat 5 or better wiring infrastructure

Extend a Composite video signal with supporting audio up to 200 meters (650 feet) using Cat 5 cablingThe COMPUTPEXTA Composite Video Extender over Cat 5 with Audio lets you extend a composite video source signal up to 200 meters (650 feet), using standard Cat 5 UTP cabling.The composite over cat 5 extender is comprised of two extender units that can be used interchangeably - one is installed near the video signal source, the other to be placed near the desired display, up to an impressive 200m away. With no software or power adapter requirements, installation and setup is quick and hassle-free. The included installation/mounting kit, and BNC to RCA composite video adapters offer added flexibility in the placement and usage of the device.Backed by a StarTech.com 2-year warranty and free lifetime technical support.The StarTech.com Advantage- Requires no software or power adapter, for a simple and hassle-free setup- The included wall mounting kit provides flexibility in the placement of the transmitter and receiver units- Cat5 extension design allows you to make use of existing Cat 5 or better wiring infrastructure

Share an HDMI display between four distinct HDMI audio/video sources, with optional Picture-and-PictureThe VS421HDPIP 4-Port HDMI Video Switch with Picture-and-Picture (PAP) lets you connect four HDMI video sources to a single HDMI display with the added benefit of playing all four video sources on your display simultaneously with combined video.See the Whole PictureThe split-screen multiplexing switch gives you the flexibility of a 4-port video switch with the added benefit of combining two, three or four video sources onto your output display. The switch supports three different picture-and-picture modes per display: Matrix Mode (1x1) / Dual Mode (2x1) / Quad Mode (4x1) .Control Your OutputFitting your boardroom or digital signage application with a VS421HDPIP dramatically increases your communication possibilities. Not only does the picture-and-picture switch increase your communication by a factor of four, but it also enables you to adjust your video sources remotely using your local TCP/IP network, or the included IR remote control.Increase the Versatility of Your DisplayThe VS421HDPIP is a flexible video switch that can improve any video display application. The picture-and-picture technology enables you to share up to four distinct images on the same screen, reducing required video real estate and saving you from wasting money on additional displays in a digital signage applications. For security monitoring you can combine four video sources across a single display to view everything more efficiently -- you can even zoom into a single feed for a closer look. For versatile installation options mounting hardware is also included ensuring a tidy professional installation.The VS421HDPIP is backed by a StarTech.com 2-year warranty, and free lifetime technical support.The StarTech.com Advantage- See the whole picture by adding multiple HDMI sources to the same display with picture-and-picture- Control your output and make your digital signage operation easier with remote control operation using Telnet (TCIP/IP Network), or IR (remote control)- Increase the versatility of your display and save money, with the picture-and-picture technology reducing the number of displays required with up to four video sources on the same display

The VS440HDMI 4x4 HDMI® Audio/Video Matrix Switch/Splitter (with Audio and RS232) lets you share up to 4 distinct HDMI or DVI inputs (using HDMI to DVI adapters - not included), with audio, between 4 independent displays or projectors.Providing convenient front push-button and RS232 PC software control, this matrix switch allows each input and the corresponding audio to be switched individually, meaning that different A/V sources can be shown on each output, or a single source can be output to several offering maximum flexibility.The switcher features a front panel LCD display for easy status monitoring, plus an included remote control and IR extender module for simple control from a distance.Designed to provide maximum functionality while saving space, the HDMI Video Matrix Switch can be used as a standalone solution or rack-mounted using ear-mounts (included).Backed by a StarTech.com 2-year warranty and free lifetime technical support.The StarTech.com Advantage- Matrix switching functionality gives you full control of the video source displayed on each monitor, at the touch of a button- Front panel push-buttons, RS-232 PC port and IR remote included for simple control and flexible switching options- Storage of display configurations allow for convenient recall of preferred combinations

Deploy content for digital signage through a scalable distribution system with intuitive control and USB extention that’s ideal for point-to-point or video wall applicationsThis HDMI® over IP kit lets you extend an HDMI signal, as well as four USB peripheral device connections, over your network. You can use additional receivers (sold separately) to distribute the HDMI and USB signals to multiple locations and combine your remote displays to create a video wall while using the USB connection to extend a touch screen to create an interactive digital signage presentation.Versatile configuration optionsIn a point-to-multipoint setup, you can connect the HDMI over IP kit through an unmanaged or managed Gigabit LAN portal. You can also connect one or several sources (transmitters) to multiple displays (receivers) over your network, using a managed Gigabit Ethernet switch with IGMP. For further scalability, you can combine up to 16 different extender kits.For smaller-scale applications, you can use the extender kit as a point-to-point video extender by connecting the transmitter and receiver units directly over Cat5 or Cat6 cabling for a one-to-one HDMI extension up to 330 feet (100 meters).Manage your video distribution from your mobile deviceThis HDMI distribution kit features an easy-to-use video control software app that helps you manage your IP video distribution. The app is simple to set up, with automatic hardware detection, and it lets you switch video sources for each remote display. You can also create and manage a video wall, for an impressive digital signage presentation that's sure to catch your audience's attention.The software is available on iOS for your iPhone or iPad, and Android™ for your smartphone or tablet.Professional, cost-effective, simple installationThe HDMI over IP extender kit can be powered using Power over Ethernet to conveniently connect both data and power using an 802.3af PoE switch or injector, avoiding the hassle of external power adapters.The kit includes optional mounting hardware for a tidy installation. Ideal for high-definition applications, the extender supports 1080p video resolutions and digital stereo audio. Plus, because the extender uses standard non-proprietary Cat5e or Cat6 Ethernet cable with RJ45 connectors, it eliminates both the expense and hassle of running specialized cables.The extender also features an EDID copy function, which ensures native resolution and maximum compatibility with your display or projector, for a convenient plug-and-play installation.Download the StarTech.com Video Control software to manage your IP video distribution.Note: For best performance, a managed network switch with IGMP is recommended if you are using more than one transmitter, or more than four receivers, Non-managed network switches may also limit the performance of other devices connected to the same network.The ST12MHDLANU is TAA compliant and backed by a StarTech.com 2-year warranty with free lifetime technical support.The StarTech.com Advantage

Computer to TV Converter | 1080p to 480i Scaler |Composite & S-Video | 2-Year WarrantyThis VGA to RCA/S-Video converter box provides a simple way to convert and scale a 1080p VGA video input signal to a 480i composite (CVBS) or S-Video output signal. Perfect for use with legacy projectors or TV sets.Hassle-Free Setup and Easy to UseEquipped with a NTSC/PAL toggle switch and a scan button for simple configuration and selection of your video output settings, this compact VGA to Composite and S-Video adapter installs quickly and easily, for a true plug-and-play experience.Save on Upgrade CostsBy using this VGA to AV adapter you can connect a PCs VGA connector to legacy TVs and projectors, ultimately saving the costs of upgrading your equipment. It's ideal for boardroom settings, medical imaging and watching videos on your S-Video or Composite display.Crystal-Clear Picture QualityThe PC to television converter features an integrated video scaler circuit that dynamically converts VGA video input signals with resolutions up to 1920x1200 @ 60Hz. To ensure compatibility with your display or projector the computer to TV converter outputs high quality 640 x 480 video, the highest supported by S-Video or Composite.VGA2VID2 is backed by a StarTech.com 2-year warranty and free lifetime technical support.The StarTech.com Advantage

HDMI® Video over Cat5e or Cat6 |Multiple Sources to Multiple Displays | Mobile Control AppThis HDMI over IP extender kit distributes video to a remote location, over your local area network (LAN) and Cat5e or Cat6 Ethernet cabling. By combining this kit with additional receivers (sold separately) and an Ethernet switch (sold separately) you can distribute an HDMI source to multiple locations and create video walls using several remote displays and receivers in the same location.You can also use multiple transmitters on the same network to distribute different video sources or connect the transmitter directly to a receiver at up to 330 ft. (100 m), in a point-to-point setup. Remote control of serial devices is supported through RS-232 extension.Resolutions up to 1080p, with AudioWith support for video resolutions up to 1080p (1920 x 1080 at 60Hz), the transmitter also supports digital and analog audio to the receiver and analog audio from the receiver to the transmitter.Mobile Control Through a Free AppThe kit includes an easy-to-use online app to manage your IP video distribution.The app is available on iOS for an iPhone or iPad, and Android for a smartphone or tablet.Download the StarTech.com Video Control software to manage your IP video distribution.NOTE: Your router must support IGMP snooping. Please refer to your network switch or router documentation to ensure IGMP snooping is supported and enabled.Hassle-Free InstallationsThe HDMI transmitter/receiver kit includes optional shelf-mounting hardware. It uses Cat5e or Cat6 cables and works with existing network infrastructures, eliminating the expense of running proprietary cables.ST12MHDLAN2K is backed by a StarTech.com 2-year warranty and free lifetime technical support.The StarTech.com Advantage

Use this repeater to amplify your 4K HDMI signal and extend it 30 ft. using a standard HDMI cableThis 4K HDMI® signal booster lets you increase the signal strength of your HDMI video source so it can travel greater distances using standard HDMI cables. You can achieve resolutions up to 4K at 60Hz at distances of up to 30 ft. (10 m), and depending on your desired resolution, the booster supports distances up to 115 ft. (35 m) away at 1080p 60Hz resolution.To install the booster, place it between two HDMI cables. Reference the table below for supported resolutions and cable lengths.Cable lengthfrom sourceCable lengthto displayTotal cable lengthMaximumresolution50 ft. (15 m)65 ft. (20 m)115 ft. (35 m)1080p (60 Hz) - 1920x108032 ft. (10 m)50 ft. (15 m)82 ft. (25 m)4K (30 Hz) - 3840x216015 ft. (5 m)15 ft. (5 m)30 ft. (10 m)4K (60 Hz) - 3840x2160Maintains Ultra HD 4K video signals at 60HzWhen you're extending HDMI over distances using standard video cabling, higher resolutions from your HDMI 2.0 devices can become unavailable after a few feet. Using this HDMI signal booster ensures that HDMI 2.0 resolutions up to UHD 4K at 60Hz are available even at distances up to 30 ft. (10 m).You can achieve even longer distances at lower resolutions -- up to 4K at 30Hz, at up to 82 ft. (25 m), and 1080p at 60Hz at up to 115 ft. (35 m).Easy and discreet installationWith its small form factor design and no external power adapter, the HDMI booster is easy to hide, for a discreet installation. By extending your video signal using standard HDMI cables, the 4K booster is a cost-effective alternative to more expensive extension systems that require the installation of a CAT5 or CAT6 cabling infrastructure.Supports a variety of distancesSupport for a variety of extension distances makes the booster perfect for multi-device deployment across large institutions, such as boardrooms in corporate offices, classrooms in schools, or waiting rooms in hospitals, as these applications may require varied distances in different rooms.Note: To achieve resolutions up to 4K60, your video source, display and cabling must support HDMI 2.0.The HDBOOST4K is TAA compliant and backed by a 2-year StarTech.com warranty with free lifetime technical support.The StarTech.com Advantage