Showing 690–700 of 2475 results

This adapter cable is an ideal solution for connecting the Mini DisplayPort or Thunderbolt output of a small laptop or tablet to a computer monitor which accepts a DVI-D input. This cable carries a digital video signal, supports up to a 1920x1200 resolution and meets the requirements of high performance applications.

Fast, fast, fast - the three words that describe Cables To Go's Cat6 network cables. Perfect for distributing data, voice and video, these 550MHz rated patch cables ensure you always have the necessary throughput to handle today's and tomorrow's bandwidth-intensive applications. Each cable is fully tested and quality inspected, ensuring all EIA/TIA Cat 6 TIA/EIA- 568-B-2.1, draft 9 standards are met. Note: These cables are for 10/100 ethernet only and wil not work for gigabit ethernet since only two pairs of this cable are crossed. Cat6 patch cords from Cables To Go drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire, which ensures error-free transmission! Constructed with high-quality cable and a shortened body plug, this design will keep Near-End Crosstalk (NEXT) levels to a minimum. Our all-new molded, snag-free "clip" prevents unwanted cable snags during installation without impairing your ability to insert and remove the connector from the port. It also provides unparalleled strain-relief, so that the cable is not damaged even when pulled on excessively. - Connector: 50-micron gold plated RJ-45 Male to Male - Conductor: 24 AWG Stranded Copper - Jacket: PVC - All-new molded, snag-free boot prevents unwanted cable snags while providing easy insertion and extraction from network ports - Crossed pin configuration allows you to connect two computers "peer-to-peer" without the need for a hub or switch - Perfect for connecting network switches and hubs without an uplink port to other switches and hubs

Network cable designed to support 10 Gigabit data transmission from 10GBase-T ports and equipmentThis Snagless Unshielded Cat6a patch cable is ideal for use with 10GBase-T ports and equipment, such as network adapters, hubs, switches, routers, DSL/cable modems and patch panels, and enables 10 Gigabit data transmission over a 4 pair copper cable allowing connections up to 100 meters. Current Cat6 cabling systems may only support 10 Gigabit Ethernet over limited distances. Each patch cable is fully tested to meet ANSI/TIA 568 C.2 Cat6a channel requirements.Constructed from high quality cable and plugs, this design offers improved alien cross talk performance. The Snagless hood is ideal for high density switch applications. Available in a variety of colors to easily color-code a network installation. Individual length label on each cable for ease of use.

The USB-C to A SuperSpeed USB 5Gbps Male to Male Cable is the perfect solution for connecting any standard USB-C enabled device to a USB-A device or accessory for charging and data transfer.Ensure that a USB-C equipped laptop, smartphone, or tablet is fully charged and ready to go from the 3A charging output, while simultaneously transferring photos, music, or data at speeds up to 5Gbps.The USB-C connector has a symmetrical design which is identical on both sides, so it does not matter if you plug it in upside-down or right-side-up. It will plug in the first time, every time while preventing damage to the connector port.

Product Features- Connect the USB-Micro B port of a smartphone, tablet or other mobile device to a USB Type-C port- Designed to support USB 3.0 (USB 3.1 Gen 1) communication and features- Backwards compatible with USB 3.0 devices- Color coded blue and labeled to designate USB 3.0 (USB 3.1 Gen 1) feature supportProduct DescriptionThis USB 3.0 (USB 3.1 Gen 1) USB-C to USB-Micro B cable is the perfect solution for connecting a smartphone, tablet, or other device that has a USB-Micro B port to a computer, tablet or other device that has a USB Type-C port for USB 3.0 (USB 3.1 Gen 1) communication. The color coded USB Type-C connector allows this cable to be easily identified as a USB 3.0 (USB 3.1 Gen 1) cable and differentiated from other cables which may support a different feature set. The USB Type-C connector is smaller than traditional USB connector and features a symmetrical design which allows it to be easily connected on the first try. Additionally, the durability of the USB Type-C connector allows for up to 10,000 connection cycles. This cable supports a data rate up to 5Gbps for data transfer and sync with 5 volts and 1 amp of power for device operation and charging.

Product Features- Connect the USB-Micro B port of a smartphone, tablet or other mobile device to a USB Type-C port- Designed to support USB 3.0 (USB 3.1 Gen 1) communication and features- Backwards compatible with USB 3.0 devices- Color coded blue and labeled to designate USB 3.0 (USB 3.1 Gen 1) feature supportProduct DescriptionThis USB 3.0 (USB 3.1 Gen 1) USB-C to USB-Micro B cable is the perfect solution for connecting a smartphone, tablet, or other device that has a USB-Micro B port to a computer, tablet or other device that has a USB Type-C port for USB 3.0 (USB 3.1 Gen 1) communication. The color coded USB Type-C connector allows this cable to be easily identified as a USB 3.0 (USB 3.1 Gen 1) cable and differentiated from other cables which may support a different feature set. The USB Type-C connector is smaller than traditional USB connector and features a symmetrical design which allows it to be easily connected on the first try. Additionally, the durability of the USB Type-C connector allows for up to 10,000 connection cycles. This cable supports a data rate up to 5Gbps for data transfer and sync with 5 volts and 1 amp of power for device operation and charging.

Value Series RG6 F-Type Cables are constructed with 75ohm coaxial cable that delivers high-quality video images. Low-loss 75ohm copper-clad wire and polyethylene dielectric provides accurate picture resolution and color. A foil and double-braid shield protects against unwanted noise and interference. The molded connectors attach to a flexible jacket allowing for easy installation. The 24K gold plated heavy-duty connectors ensure long lasting, corrosion-free connections. Connect digital cable boxes, DSS receivers or any video source with F-type output connections to any TV with matching F-type input jacks. Ordinary, "included in the box" F-type cables often use low-quality materials with inferior shielding, which can result in poor picture quality. Our Value Series RG6 F-Type Cables deliver all the detail, color and brightness you expect from your audio/video components.- Connectors: F-Type Plug to F-Type Plug.- 18AWG RG6 copper-clad steel center conductor delivers quality video.- Foil and double braid shield provides a clear, noise-free, vivid picture.- Flexible PVC jacket for easy installation.- Corrosion-resistant, precision-made 24K gold plated connectors ensure long lasting quality.- Fully molded connectors provide excellent strain relief that keeps your cable intact.- Ideal for connecting digital cable boxes, DSS receivers or any video source with F-type output connections to any TV with matching F-type input jacks.

The DisplayPort AOC is the perfect solution for extending DisplayPort signals in classrooms, conference rooms, healthcare facilities, digital signage and other commercial environments.ConvenienceUtilizing AOC technology that performs similar to traditional copper cabling, the optical fiber construction between the connectors provides optimum performance and easy installation. The AOC technology delivers several advantages which make it a smart choice in select installations. The cable diameter is smaller than copper and more flexible, making it easier to install in tight spaces. Constructed from fiber strands, this cable reduces the risk of EMI/RFI so performance is stable when used in typically high interference environments such as data centers, surgical theaters, or manufacturing facilities where high resolution and consistent display are critical.PerformanceThe AOC draws power from the DisplayPort source device, so no external power source is required. In addition to low power consumption, these cables are also plug and play and hot swappable. Additionally, the DisplayPort Active Optical Cable supports the latest 4K60 content delivery over longer distances.

This Snagless Unshielded Cat6a patch cable is ideal for use with 10GBase-T ports and equipment, such as network adapters, hubs, switches, routers, DSL/cable modems and patch panels, and enables 10 Gigabit data transmission over a 4 pair copper cable allowing connections up to 100 meters. Current Cat6 cabling systems may only support 10 Gigabit Ethernet over limited distances. Each patch cable is fully tested to meet ANSI/TIA 568 C.2 Cat6a channel requirements.Constructed from high quality cable and plugs, this design offers improved alien cross talk performance. The Snagless hood is ideal for high density switch applications. Available in a variety of colors to easily color-code a network installation. Individual length label on each cable for ease of use.

Velocity™ Digital Audio Coax Interconnects from Impact Acoustics are a great upgrade from the cables typically included with consumer electronics products. Low-loss 75ohm oxygen-free copper center conductors and foam dielectric provides improved sound quality and performance. The 100% aluminum foil and dual OFC braid shields protect against unwanted noise and interference. Robustly designed molded connectors combine with an ultra-flexible jacket, and allow for easy installation and identification. The 24K gold plated, durable connectors ensure long-lasting performance. - Connectors: RCA Male to RCA Male - 75-ohm oxygen-free copper center conductor delivers high-quality digital audio - 24K gold-plated connectors ensure long-lasting quality - Fully molded connectors provide excellent strain relief - Aluminum foil and oxygen-free copper braided shields provide clear, noise-free, vivid sound - Ultra-flexible PVC jacket for easy installation