Showing 740–750 of 2475 results

Network cable designed to support 10 Gigabit data transmission from 10GBase-T ports and equipmentThis Snagless Unshielded Cat6a patch cable is ideal for use with 10GBase-T ports and equipment, such as network adapters, hubs, switches, routers, DSL/cable modems and patch panels, and enables 10 Gigabit data transmission over a 4 pair copper cable allowing connections up to 100 meters. Current Cat6 cabling systems may only support 10 Gigabit Ethernet over limited distances. Each patch cable is fully tested to meet ANSI/TIA 568 C.2 Cat6a channel requirements.Constructed from high quality cable and plugs, this design offers improved alien cross talk performance. The Snagless hood is ideal for high density switch applications. Available in a variety of colors to easily color-code a network installation. Individual length label on each cable for ease of use.

With Cables To Go's Cat6 550Mhz Snagless Patch Cables you can stay ahead of the game with the use of this high-speed cabling to distribute data, voice and video. These cables will deliver stable performance to 550 MHz. Each meets EIA/TIA Cat 6 TIA/EIA- 568-B-2.1, draft 9 standards. These cables will handle bandwidth intensive applications up to 550 Mhz and beyond and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire! Constructed with high-quality cable and a shortened body plug, this design will keep Near-End Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides strain-relief. Cables To Go Cat6 550Mhz Snagless Patch Cables are available in a variety of colors to easily color-code your network installation. - Connector: 50-micron gold plated RJ-45 Male to Male - Conductor: 24 AWG Stranded Copper - Jacket: PVC - Molded, Snag-Free boot prevents unwanted cable snags Applications: - Gigabit 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3) - 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN - 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM - Voice; T1 - High bandwidth applications such as 622 ATM, Wideband - Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications - Standard: Category 6 TIA/EIA- 568-B-2.1, draft 9

With Cables To Go's Cat6 550Mhz Snagless Patch Cables you can stay ahead of the game with the use of this high-speed cabling to distribute data, voice and video. These cables will deliver stable performance to 550 MHz. Each meets EIA/TIA Cat 6 TIA/EIA- 568-B-2.1, draft 9 standards. These cables will handle bandwidth intensive applications up to 550 Mhz and beyond and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire! Constructed with high-quality cable and a shortened body plug, this design will keep Near-End Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides strain-relief. Cables To Go Cat6 550Mhz Snagless Patch Cables are available in a variety of colors to easily color-code your network installation. - Connector: 50-micron gold plated RJ-45 Male to Male - Conductor: 24 AWG Stranded Copper - Jacket: PVC - Molded, Snag-Free boot prevents unwanted cable snags Applications: - Gigabit 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3) - 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN - 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM - Voice; T1 - High bandwidth applications such as 622 ATM, Wideband - Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications - Standard: Category 6 TIA/EIA- 568-B-2.1, draft 9

Network cable designed to support 10 Gigabit data transmission from 10GBase-T ports and equipmentThis Snagless Unshielded Cat6a patch cable is ideal for use with 10GBase-T ports and equipment, such as network adapters, hubs, switches, routers, DSL/cable modems and patch panels, and enables 10 Gigabit data transmission over a 4 pair copper cable allowing connections up to 100 meters. Current Cat6 cabling systems may only support 10 Gigabit Ethernet over limited distances. Each patch cable is fully tested to meet ANSI/TIA 568 C.2 Cat6a channel requirements.Constructed from high quality cable and plugs, this design offers improved alien cross talk performance. The Snagless hood is ideal for high density switch applications. Available in a variety of colors to easily color-code a network installation. Individual length label on each cable for ease of use.

Today's mission critical advanced Fast Ethernet and Gigabit computer networks require the stability and reliability of Enhanced Category 5 high-speed cabling to distribute data, voice and video. To protect your high-speed network from noise and electromagnetic interference, use Cables To Go's Shielded Enhanced Cat5 Patch Cables. Each cable meets all Cat 5e TIA/EIA standards. The molded boot provides extra strain-relief and durability. Cables To Go Shielded Enhanced Cat5 Patch Cables are available in a variety of colors to easily color-code your network installation. - Connector: Shielded 50-micron gold plated RJ-45 Male to Male - Conductor: 4-pair 24 AWG Stranded STP - Jacket: PVC - Molded boot provides extra strain-relief and durability - Foil shielding with drain wire - Applications: - 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3) - 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN - 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM - Voice - Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications in high-noise environments - Wired: TSB 568B (AT&T 258A) - Certifications: TIA/EIA

Power cords used in hospitals and other medical settings must conform to strict standards for grounding reliability, assembly integrity, strength and durability, as well as regulatory standards such as NEMA and IEC specifications. These standards are in place to ensure that power cords are safe and reliable for use in demanding hospital environments. The hospital grade power cord selection from Cables To Go offers one of the broadest selections available on the market. The coiled hospital grade power cord selection from Cables To Go is ideal for replacing overused or misplaced power cables, or to optimize office or lab layouts with a "coiled" cable that is minimized when extra length is not required. Ideal for medical carts and mobile devices, this cable, from our universal C13 series collection, will work with most PCs, monitors, scanners, printers and many other devices that are powered via the industry standard 3-pin C14 connector inlet. The female C13R connector plugs directly into the device while the male hospital grade 5-15P connector plugs into a hospital grade supply outlet. The black connectors match almost any environment or hospital standard. Performance is guaranteed through a lifetime warranty so performance is never an issue. Easily recognizable with the Green Dot mark,this hospital grade power cord ensures compliance and delivers maximum performance. - Connector 1: 3-prong flat grounded plug Male (NEMA 5-15P) - Connector 2: 3-pin shroud Female C13 (IEC320C13)

Fast, fast, fast - the three words that describe Cables To Go's Cat6 network cables. Perfect for distributing data, voice and video, these 550MHz rated patch cables ensure you always have the necessary throughput to handle today's and tomorrow's bandwidth-intensive applications. Each cable is fully tested and quality inspected, ensuring all EIA/TIA Cat 6 TIA/EIA- 568-B-2.1, draft 9 standards are met. Note: These cables are for 10/100 ethernet only and wil not work for gigabit ethernet since only two pairs of this cable are crossed.Cat6 patch cords from Cables To Go drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire, which ensures error-free transmission! Constructed with high-quality cable and a shortened body plug, this design will keep Near-End Crosstalk (NEXT) levels to a minimum.Our all-new molded, snag-free "clip" prevents unwanted cable snags during installation without impairing your ability to insert and remove the connector from the port. It also provides unparalleled strain-relief, so that the cable is not damaged even when pulled on excessively.

Fast, fast, fast - the three words that describe Cables To Go's Cat6 network cables. Perfect for distributing data, voice and video, these 550MHz rated patch cables ensure you always have the necessary throughput to handle today's and tomorrow's bandwidth-intensive applications. Each cable is fully tested and quality inspected, ensuring all EIA/TIA Cat 6 TIA/EIA- 568-B-2.1, draft 9 standards are met. Note: These cables are for 10/100 ethernet only and wil not work for gigabit ethernet since only two pairs of this cable are crossed.Cat6 patch cords from Cables To Go drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire, which ensures error-free transmission! Constructed with high-quality cable and a shortened body plug, this design will keep Near-End Crosstalk (NEXT) levels to a minimum.Our all-new molded, snag-free "clip" prevents unwanted cable snags during installation without impairing your ability to insert and remove the connector from the port. It also provides unparalleled strain-relief, so that the cable is not damaged even when pulled on excessively.- Connector: 50-micron gold plated RJ-45 Male to Male- Conductor: 24 AWG Stranded Copper- Jacket: PVC- All-new molded, snag-free boot prevents unwanted cable snags while providing easy insertion and extraction from network ports- Crossed pin configuration allows you to connect two computers "peer-to-peer" without the need for a hub or switch- Perfect for connecting network switches and hubs without an uplink port to other switches and hubs

Power cords used in hospitals and other medical settings must conform to strict standards for grounding reliability, assembly integrity, strength and durability, as well as regulatory standards such as NEMA and IEC specifications. These standards are in place to ensure that power cords are safe and reliable for use in demanding hospital environments. The hospital grade power cord selection from Cables To Go offers one of the broadest selections available on the market.From our vast selection, you'll find the right solution for replacing an overused or misplaced power cord, or to optimize office or lab layout with a cable that is the perfect length needed. This cable, from our universal C13 series collection, will work with most PCs, monitors, scanners, printers and many other devices that are powered via the industry standard 3-pin C14 connector inlet.The female C13 connector plugs directly into the device while the male hospital grade 5-15P connector plugs into a hospital grade supply outlet. The black connectors match almost any environment or hospital standard. Performance is guaranteed through a lifetime warranty so performance is never an issue. Easily recognizable with the Green Dot mark,this hospital grade power cord ensures compliance and delivers maximum performance.

Network cable designed to support 10 Gigabit data transmission from 10GBase-T ports and equipmentThis Snagless Unshielded Cat6a patch cable is ideal for use with 10GBase-T ports and equipment, such as network adapters, hubs, switches, routers, DSL/cable modems and patch panels, and enables 10 Gigabit data transmission over a 4 pair copper cable allowing connections up to 100 meters. Current Cat6 cabling systems may only support 10 Gigabit Ethernet over limited distances. Each patch cable is fully tested to meet ANSI/TIA 568 C.2 Cat6a channel requirements.Constructed from high quality cable and plugs, this design offers improved alien cross talk performance. The Snagless hood is ideal for high density switch applications. Available in a variety of colors to easily color-code a network installation. Individual length label on each cable for ease of use.