Showing 840–850 of 1149 results

Crestron CRESTRON AIRMEDIA RECEIVER 3000 WITH WI-FI NETWORK CONNECTIVITY

The Dual 4K HDMI HDBaseT + VGA, 3.5mm, and RS232 over Cat Switching Extender Box Transmitter - 4K 60Hz allows 4K HDMI or VGA sources to be extended using a single Cat6a Ethernet cable. This is an ideal solution where video and audio needs to be extended to displays in conference rooms, classrooms, lecture halls, and many other installation needs that are far beyond the length limitations of standard cabling.This transmitter extends HDMI and VGA signals over a single network patch cable. Extend 4K HDMI up to 115 feet and 1080p VGA up to 230 feet using a Cat5e or Cat6 cable. For longer 4K distances, extend 4K HDMI or up to 130 feet using a Cat6a cable.This HDMI HDBaseT transmitter is HDCP 2.2 compliant, making sure that the connection from the source is secure. With bi-directional PoC support, one power adapter at either transmitter or receiver side can power both units, so no additional power adapter is required, allowing for greater flexibility in installations. The USB Micro-B input supports necessary firmware updates. Advanced users can control one-way IR pass through from the transmitter to the connected receiver and also control and configure both local and remote devices via RS232.

Split 1 DVI-D output for display on 2 DVI-D compatible monitors The TruLink DVI-D splitter connects two HDTV displays or two computer monitors equipped with DVI inputs. HDCP compatibility means this splitter will work with high definition video for HDTV applications and high resolution PC applications. Compatible with DVI-D equipped PC video cards operating at a maximum resolution of 1920 x 1080 pixels, or with video devices at 480p, 480i, 720p, 1080i, and 1080p scan rates. Built-in DVI repeater allows lossless runs up to 10 meters from the splitter. Input: One 24-pin DVI-D Female Output: Two 24-pin DVI-D Female

The C2G Pro HDMI to VGA Converter is an ideal solution for connecting newer laptops or computers that output an HDMI signal to legacy displays, such as projects or monitors, which accept a VGA input. This device converts the digital HDMI A/V signals to an analog VGA video and stereo audio signal. Many products on the market, particularly cables, claim this capability; however, most of these products only "adapt" from HDMI to VGA. Without an active conversion process, there are very few devices that are able to output an analog VGA signal from an HDMI output. The Pro HDMI to VGA Converter is an active device which converts a digital HDMI signal to an analog VGA video and stereo audio signal. This product is easy to use with no software or drivers required. Simply connect the unit and enjoy high definition content on an analog display. The durable metal housing protects the converter and provides for a long life. For added convenience, this device is bus powered from the HDMI port, so no additional power source is required. A 3.5mm stereo audio output is also included so that audio can be enjoyed through the display. Note: This product is able to draw the required power for operation from the HDMI source device, so it does not typically require a power supply. For situations that may require the use of a power supply, e.g. use of low power source devices, please call customer service to order the power supply, part number 98157.

The Cables To Go PC-TV adapter device allows you to convert your VGA signal from a computer to a composite out video so you can connect your PC, Mac or other VGA devices to your TV or projector. This is useful when connecting your computer to an older TV or projector, that doesn't support VGA, for large screen viewing. This device also comes with VGA and S-Video output ports to allow viewing on multiple displays which can support these signals. The converter kit comes with a USB power adapter so it can draw power from your computer instead of needing a dedicated outlet. This device's small footprint makes it easy for travel or to fit in tight spaces. The menu options allow for customization of display adjustment settings.

The DisplayPort HDBaseT over Cat5 Extender allows DisplayPort audio/video signals to be extended over a single Cat5/Cat5e/Cat6 unshielded twisted pair cable up to 300ft at a 1080p resolution. This transmitter requires a DisplayPort or HDMI HDBaseT Receiver for a complete solution. This solution is compatible with any operating system and is truly plug and play with no drivers or software required. This solution utilizes TruChoice power, which allows power to be supplied over the Cat5 cable to both the transmitter and receiver from a single power adapter placed at either the transmitter or the receiver end of the solution. HDBaseT technology supports HDCP and allows the Extended Display Identification Data (EDID) signals, i.e. communication of the display’s capabilities, to pass through the extension solution ensuring that the content from the source is sent at the optimal resolution for the display. Built-in power surge protection and high ground loop immunity ensure high performance signal extension.