Showing 960–970 of 1149 results

Matrox ConvertIP DSSDual-channel SFP SDI-to-IP transmitter/receiverMatrox ConvertIP DSS is a compact, standalone ST 2110 and IPMX transmitter/receiver device. Featuring 12G-SDI, genlock, one RJ45, and two SFP28 ports on a single device, ConvertIP DSS is designed for compressed or uncompressed workflows up to 25G and is optimal for an ultra-low latency experience. The device can receive power over Ethernet through its RJ45 connection, or it can be powered through an optional power supply unit. Both can be used simultaneously to deliver power redundancy.Key features• SDI I/O• Multi-network support 2x SFP28 (10G & 25G network support) 1x RJ45 (1G network support)• Fanless design for quiet cooling• Genlock support for house sync input• Power redundancy through PoE+ and locking AC power connector (optional power supply cable sold separately)• Optional bracket for VESA mounting behind monitors• Optional 1 RU rack shelf that holds two appliances• Optional fault-tolerant, hot-swappable, and rack-mountable power supplyBenefits• Transmit or receive signals from a single device• Low latency with exceptional 4K image quality• Colibri codec for high-quality transmission of compressed media• Optional JPEG XS codec license for uncompressed media• IPMX ready• ConvertIP Command Center complimentary web interface for managing ConvertIP devices• Optional Matrox ConductIP software license for discovery and routing• Compact form factor mounts easily to the back of a monitor

Matrox® QuadHead2Go™ Q155 Multi-Monitor-Controller ApplianceProduct Info:Capable of driving four displays from one signal, the Matrox® QuadHead2Go™ Q155 multi-monitor controller appliance provides complete video wall scalability and flexibility. This system-independent appliance is designed to power any video wall configuration of any possible dimension, from any HDMI® video source-reliably delivering flawless image quality across expansive, artistic video wall displays, suited for digital signage in a wide range of industries. QuadHead2Go’s on-device buttons and pre-set configurations ensure an out-of-the-box, trouble-free installation experience.•Drive up to four pristine quality Full HD displays from a single video signal-of up to 4Kp60 and 8Kx8K-at full RGB 8:8:8 and YUV 4:4:4 color support.•Expand to a video wall configuration of any size by using multiple QuadHead2Go units.•Create a video wall from any content source, including professional graphics cards and integrated GPUs, video wall controllers, digital signage players, media players, decoders, laptops, NUCs, set-top boxes, gaming consoles, and more.•Design modern and artistic video wall layouts with free rein-each output can have its own resolution, be independently rotated (90, 180, and 270 degrees), cropped, upscaled, downscaled, and positioned anywhere.•Fashion countless forms of setups-arrange displays in 4x1, 1x4, 2x2, 3x1, 1x3, 2x1, or 1x2 rectangular configurations, in portrait or landscape, or other non-rectangular/artistic configurations-and combine/scale them to create large-scale, captivating vid•Simplify installation with guaranteed out-of-the-box plug and play when using the default configuration of 2x2 in landscape-set up without installing software or even connecting a video source.•Design any custom configuration/array with the intuitive Matrox PowerWall software.•Ensure compatibility with professional-grade graphics cards and media players with HDMI support.•Eliminate physical handling by controlling and updating the units remotely from anywhere on the network (LAN).•Select and set the display layout by cycling through pre-set configurations* using an on-device button-there is no need to install software when using a pre-set configuration.•Set up display positions, fine tune bezels, and also troubleshoot with ease, by accessing the built-in or pre-saved images directly from the appliance, together with display identification information that includes the ID number and the resolution of eachTech Specs:•Connector : RJ45 •Depth : 181.10 mm •Height : 31.75 mm •Memory : 1 GB •Width : 139.70 mm •Form Factor : Appliance (p/n: Q2G-H4K) •Audio Format : AAC, PCM, Stereo, and Mono •Regulatory Compliance : FCC, CE, KC, RCM, EMC •Control Interface : 1 x 10/100/1000 Base-T RJ45 Ethernet port •Standard : Ethernet 10/100/1000 Base-T, Auto-Detect, Half/Full-Duplex •DC Voltage : 12 Volts •Video Scaling : Matrox’s advanced multi-channel Video Scaling Engine •Audio Sampling Rate : 44.1 KHz and 48 KHz, 16-bit stereo •Supported Configurations : 2x2 (default), 4x1, 3x1, 2x1, 1x2, 1x3, 1x4, Clone in both landscape and portrait modes and other non-rectangular/artistic configurations •Product Weight : 0.49 kg •Maximum Output Resolutions : 1920x1080 at 60Hz, 1920x1080 at 30Hz, 1920x1200 at 60Hz, 1920x1200 at 30Hz Other output resolutions are supported •Active Power : 42 Watt •Warranty (Length/Type) : 3 Years •Operating Temperature (Maximum) : 45 C •Operating Temperature (Minimum) : 0 C •Firmware Update : Via network interface •IP addressing : DHCP (default) and Static IP •AC Voltage (Minimum) : 100 Volts •AC Voltage (Maximum) : 240 Volts •IP Version : IPv4/IPv6 •Output Color Space : RGB: 8:8:8 (24 bits per pixel) •Input connector (video and audio support) : 1 x HDMI •Maximum input resolutions : 3840x2160 at 60Hz, 3840x2160 at 30Hz, 7680x1080 at 60Hz, 7680x1080 at 30Hz, 1920x4320 at 60Hz, 1920x4320 at 30Hz Other input resolutions including 8Kx8K are supported •Output connector (video and audio support) : 4 x HDMI •Command and control protocols : HTTP/HTTPS, UPnP (discovery), mDNS and DNS-SD (discovery) •Input color space : RGB: 8:8:8 (24 bits per pixel), YUV: 4:4:4, 4:2:2 (8 bits per component) •Systems Controlled - Audio •Systems Controlled - Video •Warranty - Yes

This multi-input converter switch lets you connect your DisplayPort (DP), HDMI® and VGA audio/video sources to one HDMI display or projector. The switch enables you to automatically or manually switch between your video sources and features built-in signal conversion, which eliminates the cost and hassle of using additional adapters for the sake of compatibility.This versatile A/V switch supports video resolutions up to 1920x1200 (1080p) on your VGA source and up to 4K at 30 Hz on your DisplayPort and HDMI video sources. For a tidy, professional installation, the converter switch includes mounting hardware.Save time with a single switch for DisplayPort, HDMI and VGAThe A/V switch features built-in HDMI conversion, so you can connect two HDMI sources as well as a VGA and a DisplayPort video source to the same HDMI display, without having to use additional adapters or scalers.Effortless control with automatic or priority switchingThe converter switch ensures hassle-free operation, with two different auto-switching modes: auto-detect switching, which detects and selects a newly connected device, or priority selection, which lets you choose which port should be activated by default for automatic switching. The converter switch is perfect for digital signage applications where an automatic switch can replace a failed source with a secondary input to avoid embarrassing video outages.Focus on your presentation, not boardroom connectionsThis versatile A/V switch has been designed with the boardroom and classroom in mind, with HDMI, VGA and DisplayPort inputs to support a wide range of devices, and a built-in converter that makes it easy to connect to the room’s display without having to connect additional adapters. Plus, automatic switching encourages on-the-fly collaboration among students or co-workers, by making it so easy to share a projector or other display device between multiple sources.Impressive DisplayPort and HDMI image quality with 4K supportThe video switch maintains Ultra HD 4K picture quality while switching between content from HDMI and DisplayPort source devices, including Blu-ray™ players and DVD players, computer systems, video game consoles, digital cable and satellite boxes and A/V receivers.4K video support ensures a higher level of image clarity and visibility, delivering four times the resolution of 1080p -- 8.29 million pixels versus 2.07 million pixels. It offers a more engaging visual experience for audiences in a wide range of venues, including conference centers, boardrooms, educational facilities, and commercial settings.When connecting a VGA source, the switch supports high-definition resolutions up to 1920 x 1200. With its exceptional resolution and image quality, this switch is ideal for bringing your digital signage to life.The HDVGADP2HD is backed by a 2-year StarTech.com warranty and free lifetime support.

The B126-110 HDMI over Cat5/Cat6 Active Remote Repeater works with Tripp Lite B126-Series transmitters and receivers to extend an HDMI signal to multiple projectors, monitors or televisions in a chain. It’s ideal for digital signs, trade shows, presentations, classrooms, churches, retail settings and other applications where the video source is located farther than conventional cables allow or that require multiple displays connected to one source. The repeater uses HDMI cable (see Tripp Lite’s P568-Series) to connect to the local monitor and Cat5e/6 cable to transmit to the receiver and/or other remote repeaters in the chain (for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite’s N202-Series).The B126-110 can extend a 1080i (60 Hz) signal up to 53 m, a 1080p (60 Hz) signal up to 38 m and a 3D signal up to 30.5 m. You can connect up to three B126-110 units in the chain for a total of four HDMI displays and full signal extension of 213 m (1080i), 152 m (1080p) or 122 m (3D).In addition to crystal-clear video, the B126-110 delivers full, rich stereo and 7.1-channel surround sound (multi-channel or PCM) audio when used with a B126-Series transmitter. Built-in equalization control lets you fine-tune the image quality at each remote display. Supports 24-bit True Color (8 bits per channel) and HDCP compatibility. Easy to set up with no software or drivers to install. Mounts to a wall, rack or pole using the included hardware.Extends High-Definition Signals● Extends a 1080i (60 Hz) signal up to 53 m, a 1080p (60 Hz) signal up to 38 m and a 3D signal up to 30.5 m● Connect up to 3 remote repeaters to the chain for maximum signal range of 213 m (1080i), 152 m (1080p) and 122 m (3D)● Connects to next link in the chain with one Cat5e/6 cable (for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite’s N202-Series)Supports the Latest Video and Audio Resolutions● Works with all operating systems and HDMI video sources● Supports HD resolutions up to 1080p (60 Hz)● Supports stereo and 7.1-channel surround sound (multi-channel or PCM) audio when paired with B126-002 or B126-004 transmitter unit● Supports 24-bit True Color (8 bits per channel) and HDCP● Built-in equalization control lets you adjust the image on the local monitorEasy to Set Up and Use● Plug-and-play engineering—no software or drivers to download and install● Connects quickly to local monitor with HDMI cable, such as Tripp Lite’s P568-Series● Included mounting hardware lets you install the unit on a wall, rack or pole● Extends 1080i (60 Hz) signal up to 53 m● Connect up to 3 units in a chain for maximum extension● Supports high-definition video resolutions up to 1080p (60 Hz)● Supports stereo and 7.1-channel surround sound audio● Plug and play—no software or drivers to installSystem Requirements● HDMI video source and displays● For international use, the B110-INT power supply can be purchased separately; it features plugs for the UK, Europe, and AustraliaPackage Includes● B126-110 HDMI over Cat5/Cat6 Active Remote Repeater● Screwdriver for adjusting equalization● External Power Supply with NEMA 1-15P Plug(Input: 100–240V, 50/60 Hz, 0.5A; Output: 5V, 2A)● Mounting hardware● Owner’s Manual