Add two Next Generation Form Factor M.2 SSDs and two SATA ports to your computer through PCI ExpressThis M.2 SSD RAID controller card lets you install two M.2 NGFF (Next Generation Form Factor) drives in your desktop computer. The card also features two SATA III (6Gbps) ports and supports hardware RAID. Now, you can merge the speed and compact size of M.2 solid state drives (SSD) with the storage capacity of traditional hard disk drives (HDD).Leverage the size and speed of M.2 drivesThis M.2 controller card lets you take advantage of the size and performance benefits of NGFF SSDs. M.2 drives are smaller than typical platter drives or mSATA-based SSDs, so you can install them in small form-factor PCs and servers, or in tighter areas within your computer case.When you couple the card with an M.2 drive, you can give your computer’s performance a noticeable speed boost. By installing your operating system on the M.2 drive, you'll have faster access to the files you commonly use, and you can continue to use your higher-capacity platter HDD for bulk storage.Peace of mind, with simple and cost-effective data recoveryDue to their performance and size advantages, M.2 drives are commonly used in laptops. If your laptop has failed but its M.2 drive is functional, then this card can help with data recovery. Once the M.2 drive is installed and the data recovery is complete, you can continue to use the drive for storage and backup purposes.Build a high-performance RAID arrayIf you need a scalable, internal storage solution that you can count on, then this card can help. It supports a range of RAID configurations (RAID 0, 1, and 10), giving you multiple ways to expand your storage, improve your computer’s performance, or to create data redundancy backups.Connect even more drives with port multiplicationBecause the M.2 card supports port multiplication, you can connect up to four drives to one of the card’s SATA ports. With a built-in port multiplier, you can install up to seven drives (two M.2 SSDs, five SATA drives) in your computer through this single drive controller.Supports a wide range of drivesYou can rest assured that your M.2 SATA drives are compatible with the card. It supports the most common drive sizes, including 22110, 2280, 2260, 2242 and 2230. For more versatility, the card also supports hybrid drives.The PEXM2SAT3422 is backed by a StarTech.com 2-year warranty and free lifetime technical support.The StarTech.com Advantage
Add a DB9 serial port to the rear panel of a small form factor/low profile computer.The PLATE9MLP 9pin Serial Male to 10pin Motherboard Header LP Slot Plate adds a DB9 serial port to the rear panel of small form factor/low profile computer, connecting to the host computer motherboard using an IDC10 connector.Please refer to this product's Technical Specifications to ensure compatibility with your motherboard.The StarTech.com Advantage- Connects to your motherboard and adds an additional DB9 serial port to the back of your PC- Easy to use and install- Backed by StarTech.com's lifetime warranty
Add a parallel port and two RS-232 serial ports to your PC through a PCI expansion slotThe PCI2S1P PCI Serial/Parallel Combo Card turns a PCI slot into two external 16C550 serial ports and one external EPP/ECP parallel port - an all-in-one solution that gives you both parallel and serial connections while taking up only one PCI slot.Suitable for installation in a small form factor computer, the PCI serial/parallel card includes an optional low profile/half-height mounting bracket that makes installation easy.The serial/parallel combo card is PCI plug and play ready and supports IRQ sharing for fast, simple installation. The combo card is supported in virtually any Microsoft Windows operating environment (Windows® 7, Server 2008 R2, Vista, XP, ME, 2000, 98, 95 and NT4), and is backed by a StarTech.com Lifetime Warranty and free lifetime technical support.The StarTech.com Advantage
PROMISE TECHNOLOGY VESS RAID 2K 2GB DDR3 MEM MOD UPGRADE/R
PROMISE TECHNOLOGY 512MB DDR2 MEM MOD
The AT-2712FX/SC Network Interface Card is an ideal fit for fiber to the desktop networks that depend on secure and reliable systems. With a small form factor PCIe x 1 Bus the AT-2712FX is an ideal fit for government, education or other networks dependent on highly secure capabilities.- Advanced centralized power management- NDIS 6 IPSec task offload compliant (Vista Logo Compliant)- 32 security associations- DASH manageability complaint with v1.1 as defined by the Desktop and Mobile Workgroup- IPv4 and IPv6 Large Send Offload and Checksum Offload (LSO/TCO)- Wake on LAN (WoL) support meeting ACPI requirements- Statistics for SNMP MIB II- Broadcom TruManage™: Allows remote management of PC when powered on and/or off
Part of the comprehensive Allied Telesis 2911 Series, the AT-2911SFP/2 Network Interface Card continues the Allied Telesis tradition of providing reliable fiber adapter cards. Gigabit cards boost the speed of the network up to ten times over a standard Fast Ethernet card to 1000MB per second. The PCIe x1 bus provides the latest technology, enabling the maximum throughput in the smallest form factor possible.
PCI Express 3.0 M.2 SSD Adapter Card | For PCIe NVMe and PCIe AHCI M.2 SSDsUpgrade your system speed and performance with this Dual M.2 PCIe SSD Adapter. It lets you add two high performance, enterprise-class PCIe 3.0 M.2 SSDs (NVMe and AHCI) into the PCIe 8-lane or larger slot of your desktop workstation or server.Boost System PerformanceThe expansion card lets you take full advantage of the fast performance and compact size of PCIe M.2 internal solid-state drives. With the M.2 PCIe based drives in place, the adapter increases your storage capacity and gives your computer a significant speed boost, enhancing data transfer rates.Access two M.2 PCIe SSDs simultaneouslyThe dual M.2 to PCIe expansion card employs a high-speed ASM2824 switch, allowing you to access two drives at the same time. Since the adapter card does not rely on PCIe bifurcation, it can easily be integrated into all systems, new and legacy.The M.2 PCI express adapter also gives you the flexibility to access your M.2 PCIe SSDs individually. Or, you can utilize software RAID to build a RAID array to add redundancy or enhance system performance.Wide System CompatibilityThe adapter connects directly to your computer motherboard to support two PCIe M.2 SSDs through a x8 PCIe expansion slot. The adapter is compatible with PCIe 3.0 motherboards and is backward compatible with PCIe 2.0 and PCIe 1.0.Supports a Wide Range of PCIe M.2 SSDsThe PCIe M.2 NGFF (M Key) adapter supports PCIe 3.0 NVMe and PCIe-AHCI M.2 SSDs including 2242, 2260, and 2280 drives, supporting the most common drive sizes: 42, 60, and 80 mm lengths.Easy to InstallThe expansion card comes with a full-profile bracket pre-installed, and includes a half-height / low-profile bracket, for installation in small form-factor computers.Vented BracketsVented brackets on the PCIe M.2 NGFF SSD adapter card increases air flow to assist in heat dissipation.The TAA compliant PEX8M2E2 is backed by a StarTech.com 2-year warranty and free lifetime technical support.The StarTech.com Advantage
MFR: Netgear, Inc
Qty: 1
Part #: GS105NA
