Showing 320–330 of 13559 results

Prevents Recirculating Hot Air from Harming Your Rack-Mounted EquipmentThis SmartRack® blanking panel kit is ideal for filling in unused rack spaces in your EIA-standard 19-inch rack enclosure. SR1UPANEL10 blanking panels close off unused rack openings, which improves cooling efficiency by optimizing airflow and preventing hot air from recirculating through your expensive equipment. Efficient cooling reduces operating costs, improves performance and helps your network equipment last longer.Easy to Install with No Tools NeededEach blanking panel’s rear tabs snap easily into the front mounting rails of your rack enclosure. No tools are needed. Each blanking panel occupies 1U of rack space. Ten blanking panels are included.

This 2-post desktop rack provides 8U of storage space for mounting smaller A/V and IT equipment.Save money with a low-cost mounting solutionWith this 2-post rack, you can mount equipment at a fraction of the cost of conventional racks. The lightweight rack is engineered to meet EIA-310 rack-mount standards and is constructed of solid steel, ensuring a sturdy and safe mounting solution for your mission-critical equipment.Improve efficiency and accessibility in your office or server roomThe rack features an open frame, free standing design that saves space with a small footprint. It gives you the ability to place rack-mount equipment on any surface in your office, such as your desk. This makes it easy to access your equipment on a daily basis.Hassle-free setupThe 2-post rack is easy to assemble and includes a pack of 20 M5 screws and cage nuts.If you're looking for a desktop mounting solution with more rack units, StarTech.com also offers a 12U 2-post desktop rack.The RK8OD is backed by a StarTech.com lifetime warranty and free technical support.

Install computer hardware with an assortment of screws, nuts and standoffsStarTech.com's PC Screw Kit offers a handy assortment of common PC fasteners for building, reparing, and maintaining computer systems. The PC screw kit includes 12 different fasteners all in a plastic carrying case with divided compartments.The PC screw kit offers 50 screws in each of 7 category types, for a total of 350 screws, as well as an assortment of standoffs.The StarTech.com Advantage- Convenient and organized carrying case for a wide assortment of screws and standoffs- Keep a variety of common computer case screws in one location

Turns any 3.5in SATA hard drive into a rugged, hot-swap storage solution for a 5.25in bayThis high quality Removable SATA Hard Drive Drawer/Mobile Rack delivers a professional-grade hot-swap solution, allowing you to quickly swap SATA hard drives in/out of a computer without having to open the computer case. The mobile rack is fully compatible with RAID installations to ensure maximum performance and versatility for enhanced storage applications.To maximize performance and utilize the full speed potential of your SATA III hard drives, this HDD Backplane supports SATA III for transfer speeds up to 6 Gbps when paired with a compatible controller.Simply install the drive bay into a 5.25in bay on the host computer, then mount a 3.5in SATA HDD into the (removable) caddy. Connecting the SATA hard drive to the computer is as easy as inserting the caddy into the drive bay, which can be locked to prevent unauthorized removal of the drive. Features a front panel ball bearing fan, aluminum construction and 25K insertion rating. Backed by StarTech.com's 2-year warranty.This product is interchangeable as a replacement for StorCase SATA models S21J111, SC21J111 and RJR110.The StarTech.com Advantage- Maximize performance, with file transfer speeds up to 6Gbps when paired with SATA III HDD and controller- Mobile rack system makes removing/replacing drives quick and safe, while a key lock prevents unauthorized access to the drive- Solid aluminum construction, 40mm cooling fan and 25, 000+ insertion rating ensures durability and reliability from the Mobile Rack and the SATA drive

Modularity has a new face, and it comes to us in the form of DeepCool's internally reconfigurable ATX+ chassis: the MORPHEUS WH. With incomparable compatibility and a spacious layout, the MORPHEUS WH is the best option for the DIY modder or the casual PC enthusiast.MORPHEUS WHThe Internal ShapeshifterMORPHEUS WHModularity has a new face, and it comes to us in the form of DeepCool's internally reconfigurable ATX+ chassis: the MORPHEUS WH. With incomparable compatibility and a spacious layout, the MORPHEUS WH is the best option for the DIY modder or the casual PC enthusiast.A NEW TAKE ON MODULARITYIf sticking to the same system layout for years sounds boring, the MORPHEUS WH is exactly what you are looking for. Easily switch between the classic single chamber configuration and the dual chamber layout with a simple switch of a few parts. Everything necessary to shift between the two configurations is included, as well as a vertical GPU mount (complete with a Gen 4.0 riser cable).AIRFLOW AT ANOTHER LEVELHigh airflow panels surround the MORPHEUS WH case from the front, right, top, bottom, rear, and even the top of the PSU shroud; there will be no shortage of airflow provided to the high-powered heat-generating components inside. High-flow mesh filters are included for the front, top, and bottom panels and will keep dust out.EXTENSIVE COOLING CAPABILITYFan options are unparalleled, with the ability to mount thirteen 120mm or 140mm fans or go to the extreme and add up to six 200mm fans into the conversation. The highly modular fan rails make these configurations a reality.The MORPHEUS WH can also support up to three 420mm radiators simultaneously. 420mm radiators can be mounted to the front, top, bottom, and side of the motherboard tray.A TRINITY OF FANS!A set of highly convenient trinity fans come mounted inside the MORPHEUS WH: three beautifully bright 140mm ARGB fans are united into a single 420mm unit. The trinity of fans only require the wiring of a single set of PWM and ARGB cables, greatly reducing the amount of cable management.MAXIMUM COMPATIBILITYThe ATX+ form factor of the MORPHEUS WH case guarantees compatibility with a large range of components. This ATX+ DeepCool case supports E-ATX motherboards while also having compatibility for GPUs up to 480mm in length, 195mm tall CPU coolers in the single chamber configuration, and multiple 420mm radiators.DUAL REAL-TIME DIGITAL DISPLAYSave precious space on your desktop by moving the monitoring of temperatures and usage of your CPU and GPU onto the built-in display that is included with the MORPHEUS WH case. A simple-to-install app and an open USB 2.0 header will get the dual display up and running.A BEVY OF I/O PORTSWith four USB 3.0 ports, a Type-C port, and a hybrid audio port, there is no shortage of devices that can be accessed from the top front I/O panel. There is also an LED cycle button to control the built-in ARGB controller, an HDD activity LED, and a Power button to round out the front I/O.BITS!Add a bit of a personal touch with the fun rubber square bits! Included as a fun addition, the pixels can be used with majority of the mesh panels of the MORPHEUS WH case. Leave messages for others, add custom logos, or create your own 8-bit character!

Control your server or KVM switch from a centralized LCD KVM drawerThis rack-mount KVM console provides complete keyboard, monitor and mouse control for eight computers. The rack-mount console installs into 1U of rack space, offering a space-efficient solution for complete console control.Maximize your IT budget, minimize your hassleThis 8-port KVM switch provides all the essential controls you’ll need to manage your server room at a low cost. The console features a built-in touchpad, keyboard (QWERTY) for intuitive control and an LCD display that supports resolutions up to 1280x1024.Maximize your screen spaceThis versatile rack-mount LCD console has a 19 in. screen. The increased screen space allows you to run multiple applications on the same screen, increasing your productivity.Clutter-free monitoringThe console slides out from 1U of rack space, enabling you to easily monitor and control eight servers and even more if connecting through a KVM switch. The rackmount VGA console features a handle for easy sliding in and out of the server rack, keeping your area organized and clutter-free.Hassle-free system integrationThe rackmount LCD features an 8-port KVM module, which enables you to connect it directly to eight servers. The KVM module offers the flexibility you need for easily integrating the console into your existing server infrastructure.The RKCONS1908K is backed by a StarTech.com 2-year warranty and free lifetime technical support.The StarTech.com Advantage