Showing 220–230 of 2049 results

Computer AC Power Cable Connects Computers, Monitors and Other EquipmentThis computer AC power cable is designed for low-voltage data center, server room or home/office applications. It converts a NEMA 5-15P plug into a C14 connector. You can use it to connect a computer, monitor, printer or other device with a NEMA 5-15P plug to a surge protector, UPS system or PDU with C13 power outlets. You can also connect your C13 printer or monitor to a switched source on your PC, allowing you to turn both devices on and off at the same time. The 2-ft. (0.61 m) length helps reduce cable clutter.

#NAME?

1.8m Battery Extension Cable 180V EBM 5/6kVA 9SX/PX

Replace the Power and Reset switches and LEDs on the front of a ATX computer caseThis Power/Reset LED wire kit is suitable for replacing burnt out LEDs and switches on a PC (ATX) Case Front panel.The five-piece kit comes with two switches (Power, Reset) and three LEDs (Power, Hard Drive Activity, Sleep). Each switch and LED is clearly labeled to make installation easy.The replacement Power/Reset LED wire kit offers a cost-effective way to keep your ATX computer case working the way it did when first purchased, without the expense of a new case.The StarTech.com Advantage- Replaces burnt out status leds on ATX cases- Conveniently labeled motherboard connectors

Establish a secure power connection with locking C13 connectorThe IT Pro's ChoiceStarTech.com's power cables are designed by IT professionals. We design our products to meet the technical requirements of wide variety of applications. Our in-house specialists subject our products to multiple rounds of comprehensive testing, designed to emulate real-world operational conditions. Third-party labs test our products to confirm compliance with the latest safety standards.StarTech.com manufactures standard and heavy-duty power cords, extension cords, medical-grade cords, power splitter cables, and power cords featuring passthrough outlets. These products are produced in various lengths, with a range of connector ends, jacket types, and wire gauges. Our power cable products are chosen by IT professionals worldwide for the following reasons:.• Certified for performance and safety - Manufactured using UL listed components to meet UL62 and UL817 compliance standards• Reduced environmental impact and safe disposal by adhering to the rules, regulations, and directives stipulated by REACH and RoHS• 100% Copper wiring tested for continuity and conductivity, ensuring maximum performance and reliability• Temperature chamber tested to ensure reliable performance across a range of environmental conditionsBacked for life by StarTech.com, our brand is trusted throughout the IT ecosystem and used by over 80% of Fortune 500 companies.The StarTech.com Advantage

"Free up space and secure power cords between rack-mount PDUs and attached IT equipment with this exclusive easy-to-use cord retention method. While these cords will fit into any standard IEC receptacle or power inlet; the ""locking"" feature is enabled only when used with APC AP8000 series Rack PDUs or IT equipment with built-in locking receptacles. These locking connectors reduce the probability of accidentally disconnecting cords and dropping loads."

Tripp Lite's line of AC power cords offer PC users a solution to their power connectivity problems. This 1.83 m (6-ft.) cable will replace the power cable on most computers and peripherals that have a removable power cord. Cable features an AC style plug (NEMA 5-15P) on one end and a computer style receptacle (IEC-320-C13) on the other end. UL Listed.- Plug type - NEMA 5-15P (AC) to IEC-320-C13 (Device)- 18AWG, SJT, 10A, 120V- 1.83 m (6-ft.) NEMA 5-15P to IEC-320-C13 power cord - UL Listed

Wacom WACOM POWER CABLE 1.0M US CINTIQ PRO 22/27

Use Tripp Lite's P011-006 in server applications that require a higher rated, heavier gauge cable. C13 to L6-20P connectors, 3 x 14 AWG conductors, 15A/250V rating.- C13 to L6-20P Power Cable, 1.83 m (6-ft.)- 14 AWG x 3C, 250V- RoHS Compliant- UL Listed- Molded, Heavy-Duty Power Cable, 1.83 m (6-ft.)- IEC-60320-C13 to NEMA L6-20P

NEMA 5-15P to C13 Power Cable for Devices That Require a Heavy-Gauge ConnectionThis IEC-320-C13 to NEMA 5-15P power cord features 14 AWG wire suitable for high power connections, making it a reliable solution for large server applications that require a higher-rated, heavier-gauge cable. You can use it to connect a computer, server, monitor, laser printer or drive to a PDU, UPS, surge protector or AC wall outlet. It can also replace or upgrade the standard power cord provided by the device’s manufacturer. The six-foot length allows you flexibility in placing equipment with respect to the power outlet.Locking C13 Connector Helps Prevent Accidental Disconnection and Expensive DowntimeHaving a cable come loose accidentally can mean the loss of power and costly downtime. The locking C13 connector helps you avoid such danger, protecting critical equipment by maintaining a secure link without failure. The locking cable is also invaluable when moving equipment in a rack or removing equipment from tight areas, ensuring the power cord always stays connected.Lifetime WarrantyThe P007-L06 is backed by a lifetime warranty, ensuring reliability and performance.- Computer power cord connects a server, computer, monitor, printer or other device with a C14 inlet to an AC outlet on a PDU- Recommended for powering larger servers, laser printers and other network devices- 6 ft. length allows flexibility in placing devices in relationship to AC outlet- Thick 14 AWG wire gauge manages high power levels required for larger equipment- Locking C13 connector maintains secure link to avoid loss of power and costly downtime