Showing 170–180 of 487 results

APC NET7 SurgeArrest Network. Surge energy rating: 480 J, AC outlets quantity: 7 AC outlet(s), Nominal input voltage: 120 V. Product color: Beige, EMI/RFI noise filtering: 70 dB. Weight: 32.1 oz (910 g). Certification: CSA/UL 1283/UL 1363/UL 1449. Package width: 7.24" (184 mm), Package height: 2.09" (53 mm)

Protection from electrical noise interference and damaging power transients. Adjust the unit's LED and display brightness independently of each other to suit your individual tastes and environment. Adjust the unit's LED and display brightness independently of each other to suit your individual tastes and environment. Sequenced turn on/off Helps power on components in the proper order to prevent speaker stress. Proper sequencing can also help manage current draw on startup to prevent unnecessary circuit breaker tripping. LED status indicators Quickly understand unit and power status with visual indicators. Isolated filter banks Eliminates electromagnetic and radio frequency interference (EMI/RFI) as a source of audio-video signal degradation.

The Waber-by-Tripp Lite 602 Power Strip offers a convenient method of power distribution in workbench, wallmount or floor mount applications. Includes 5 NEMA 5-15R output receptacles with 1.188-inch center-to-center spacing, 6-foot AC line cord and keyhole mounting tabs for installation in a wide variety of applications. Corded, multi-outlet strip reduces cable clutter and enables the connection of multiple electrical devices to a single AC wall socket. Unfiltered electrical pass-through makes the 602 ideal for distributing alternate waveform UPS or generator power. Features rugged all-metal housing, 15-amp resettable circuit breaker and attractive blue/gray color scheme.- PLUG/OUTLETS - Input: NEMA 5-15P/Output: 5 NEMA 5-15R- ELECTRICAL - 120VAC, 50/60Hz, 15A (Requires standard NEMA 5-15R wall receptacle)- FORMAT - Corded power distribution stripKey Features- Multi-outlet power strip offers convenient power distribution in workbench, wallmount or floor mount applications- Includes 5 NEMA 5-15R output receptacles with 1.188-inch center-to-center outlet spacing- Keyhole mounting tabs for installation in a wide variety of applications- UL1363 (USA), cUL (Canada)- 15-amp power handling capacity with circuit breaker- 6-foot AC line cordTypical ApplicationsOffers multiple outlet power distribution in workbench, wallmount or floor mount applications. Unfiltered electrical pass-through makes the 602 ideal for distributing alternate waveform UPS or generator power to protected equipment.Package Includes- 602 Power Strip- Warranty information- Instruction manual

"Tripp Lite TLP368CUBEUAM surge protector Black 3 AC outlet(s) 120 V 96.1"" (2.44 m)"

Protect your electronics investment without breaking your budget. This surge suppressor guards against damaging spikes and surges, providing a secure barrier for your sensitive electrical equipment and precious data. The negative effects of Electromagnetic and Radio Frequency Interference (EMI/RFI) are also kept in check by a built-in noise filter. Wall-mountable, impact-resistant ABS plastics keep the unit looking good for years to come. 14 AWG suppressor power cord is 4 feet long. For indoor use only. Plus, three outlet saver extension cords are included to keep your surge suppressor and UPS outlets from being blocked by bulky AC transformers!

Outdoor In-Line Surge Protector Keeps Your 1G PoE Edge Network Equipment SafeIdeal for home/corporate security systems, wireless access points, routers, bridges and other PoE (Power over Ethernet) applications, the B110-SP-CAT-OD2 protects indoor and outdoor network equipment from damage caused by power surges, electrostatic discharge (ESD) and cable discharge events. Just connect it between your source and network equipment using standard 23/24 AWG Cat5e/6/6a cables (sold separately) and the included cable glands. Both mid-span and end-span PoE are supported. Note: Two B110-SP-CAT-OD2 surge protectors are required to protect both source and device.Your Last Defense Against Intruding Voltage Spikes That Can Cause Costly DowntimeThyristor diode technology features low impedance and superior power handling capabilities, providing protection against ESD and super-fast response time under one nanosecond. Gas discharge modules on all four twisted pairs protect each wire from surges or spikes by dissipating the voltage transient through a contained plasma gas. Line-to-line and line-to-ground protection modes help protect against short circuits and minimize distortion of high-speed signals. The B110-SP-CAT-OD2 meets the following IEC regulations: IEC 61000-4-2 (ESD) +/- 15kV (Air), +/- 8kV (Contact), IEC 61000-4-4 (EFT) 3kV (5/50ns) and IEC 61000-4-5 10kA (8/20µs) and 20kV (8/20µs).IP68 Rating Denotes Resistance to Dust and WaterThe housing’s IP68 rating means the surge protector is not only 100% protected against dust, but also able endure immersion in 1.5 meters of water for up to 60 minutes with no damage or decline in performance. In addition to its water and dust resistance, keeping it safe in storms and other foul weather, the B110-SP-CAT-OD2 is shockproof, giving you peace of mind without worrying about the unit being jarred and damaged.Ready to Use Right from the Package, So You Can Plug and Play ImmediatelyThis PoE in-line surge protector meets 802.3af, 802.3bt and 802.3at IEEE standards, supporting up to 90W of DC power (due to power dissipation, powered devices receive 71W) and Ethernet data speeds up to 1 Gbps. The passive unit requires no external power. Rear mounting holes allow for convenient installation where needed, such as high on a wall or pole. The distance between the B110-SP-CAT-OD2 and the equipment it is protecting should not exceed 328 feet (100 meters). Note: For best performance, the installation’s total cable distance should not exceed 328 feet.TAA-Compliant for GSA Schedule PurchasesThe B110-SP-CAT-OD2 is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

Kensington SmartSockets® Premium Adapter. Surge energy rating: 3090 J, AC outlets quantity: 8 AC outlet(s). Product color: Multicolor. Cable length: 94.5" (2.4 m)

The Protect It!® SUPER6OMNI B offers economical AC surge suppression for full protection of 220-250V workstations, desktop PCs, telecom systems and other sensitive electronics. Built-in AC surge suppression shields connected equipment from damage and performance problems due to transient surges. The SUPER6OMNI B offers six universal outlets and a 1.8-meter AC line cord with a British plug. AC suppression rated at 750 joules shields equipment from surges and line noise. Internal shutters also offer additional protection. Lighted on/off switch with integrated circuit breaker provides power control over connected equipment. Right-angle outlets keep connected cords from blocking adjacent outlets. Attractive light gray high-impact housing.

Tripp Lite Protect It! 6-Outlet Surge Protector - 5-15R Outlets, 2 USB Ports, 5-15P Direct Plug-In, 490 Joules, Black