Showing 9190–9200 of 30188 results

HP SPS - PCA NIC ADPTR 2P 25GBE SFP28 ( OPTION # 817753-B21 ) 1Y WARRANTY

Cisco Catalyst IR1831 Rugged Series Rout

The right tool to quickly test proper LAN operation after completing a move, add or change (MAC)The Pinger Plus is a unique handheld tester used for installing and maintaining computer Local Area Networks (LANs) running the TCP/IP protocol. It uses the powerful PING function at either 10 or 100 Mbps to verify connectivity, to check transmitted and received data integrity, to indicate network traffic loading by measuring round trip time, and to provide the MAC address of an IP address and warn when the default gateway cannot be located.The Pinger Plus can PING using variable packet sizes and up to 99 times consecutively. In addition, PING can be performed for a single IP address, or a range of IP addresses. The Pinger Plus also identifies reversed polarity for improperly connected wire pairs, and provides a port ID feature with selectable blink rates to identify to which port on a hub or switch the wall outlet is connected.This is the first handheld tester to provide gigabit over copper link detection. When connected to a hub, switch or NIC, the Pinger Plus displays the speed (10/100/1000 Mbps) and duplex mode (half or full) capabilities of the equipment. The Pinger Plus is an ideal tool for quickly testing proper LAN operation after completing a move, add or change (MAC). Trouble calls are easily handled by verifying link connection and running the comprehensive PING test. Resolve internet connectivity issues with the DHCP client mode that ensures a DHCP server is available and displays IP address assignment. Remote office support can be provided by connecting the Pinger Plus to the LAN at the remote office trouble point, and PINGing the tester over the internet.- PINGs at full 10/100 auto-negotiate speeds.- PINGs a single, a list, or a range of IP addresses.- Identifies 10/100/1000Base-TX link signals.- Stores up to 8 preprogrammed profiles that include Pinger Plus IP address, gateway address and 1 - 8 destination IP addresses that can be PINGed individually or successively.- Verifies LAN operation at a remote location over the internet.- Displays the MAC address for a tested IP address.- Provides port identification function (link light activation).- Identifies wire pair connections with reversed polarity.- DHCP client capability verifies DHCP server functioning and correct IP addresses are being provided.- Web browser interface for unit setup and software upgrade.- Alphanumeric keyboard for easy IP address entry.

Wall mount box for keystone jacksKeystone Jack Wall Mount Boxes from Cables To Go are perfect for surface mount applications, especially in confined spaces. They are available in one and two module versions and can be mounted for either side or base entry of cables. Boxes come with mounting screws and adhesive tape, and a cable tie for strain relief. The snap-on cover allows for easy closure or access for quick installation. The box will accommodate Cables To Go's keystone jacks or inserts. Each box includes a write-on label with holder for easy designation of different system or station.

This 2-way splitter is compatible with digital broadcast television, digital cable television, off-air antennas and satellite distribution from 15 to 2,150 MHz. Zinc-plated, die-cast housing with precision-machined ports and a soldered back ensure 140 dB isolation against RF leakage. PC board technology eliminates low frequency hum for less noise, and provides a clean, stable return path for data from the cable box or cable modem. DC-passive for devices requiring DC power such as amplified antennas and DBS dishes.

Save yourself the time and cost of an extra service call! This easy-to-use tester helps novice home network users determine cable faults before calling for service. The SOHOTest-E (Small Office Home Office) tester is an economic solution to test the most commonly used cables in residential wiring, those with f-type and RJ45 connectors.Use this handy tester to determine wiring faults in network, phone and cable TV cables before or after installation in cable installations up to 200 meters (656 feet). Has a compact, lightweight design with a small form factor of 2in x 3in x 1in. Uses a pass/fail coaxial test. Includes a remote unit for single person testing.

110/KRONE IDC punchdown; T568A/B Cat5e Surface Mount Boxes from Cables To Go are perfect for surface mount applications, especially in confined spaces. They are available in one and two module versions and can be mounted for either side or base entry of cables. Boxes include mounting screws and adhesive tape for quick and easy installation. They meet or exceed EIA/TIA 568A Category 5e specifications. Snap on cover provides for easy access; write-on labels with holders and port icons provide for easy designation of different systems or stations.

The Network Controller for HDMI over IP is a Linux-based PC that allows users to control HDMI over IP products, supporting video wall and multiview connectivity. The Network Controller may be managed via a Web interface or the C2G AVoIP Control Smartphone & Tablet App.When installed on a local area network (LAN), the Network Controller will scan the LAN for connected C2G HDMI over IP products allowing the user to auto-discover, configure, manage connectivity and support firmware upgrades for the AV over IP devices through the Web interface. The Network Controller may also be managed by the C2G AVoIP Control App for a more user-friendly experience. An Application Program Interface (API) is available ― supporting several third-party partner control applications running on smartphones and tables.Note: When installed in an electrically noisy environment, an STP cable must be used. Also, cross-connection reduces the effective distance depending on the grade of twisted cable used.

Quickly plugs into a standard two-line telephone jack to connect a device to either line one or line two. A combined line one plus line two allows you to keep your two-line telephone connected.