Showing 6770–6780 of 30590 results

The PCE-D9-04-CBL 4-Port DB9 Serial PCI Express Card adds four DB9 serial ports to your computer or server. By adding the PCE-D9-04-CBL to a computer with no DB9 ports or not enough of them, you can upgrade your DB9 capability without having to buy a new computer. Its single-chip design provides optimum reliability and speed, reducing your CPU’s load from conventional bridge-chip cards and saving you money.Perfect for home or office, the PCE-D9-04-CBL supports data transfer rates up to 250 Kbps on each port with throughput up to 2.5 Gbps. It easily installs inside your computer in just a few minutes. The standard bracket’s one-lane (x1) interface is compatible with x4, x8 and x16 PCIe slots. Connect the included DB9 breakout cable to the card’s HD44 port, and allow the appropriate drivers to automatically install on your hard drive (a driver CD is included if they don’t). The PCE-D9-04-CBL is fully compliant with PCI Express Revision 1.1 and compatible with industrial standard 16450/16550 UART. On-chip 256-byte depth FIFO in transmit and receive paths of each port. Supports hardware and software flow control; 5-, 6-, 7- and 8-bit serial formats; Even, Odd, None, Space and Mark parity; 1- or 2-stop bit operation; and re-map function for legacy ports.Adds 4 DB9 (RS-232) Serial Ports to Your ComputerUpgrades your DB9 capability without buying a new computer or serverSingle-chip design reduces CPU load from conventional bridge-chip cardsEach port supports data transfer rates up to 250 KbpsPerfect for home or office useEasy to Install Inside Your Computer1-lane (x1) interface compatible with x4, x8 and x16 PCIe slotsAppropriate drivers install to your hard drive automaticallyIncluded breakout cable features 4 DB9 donglesLoaded with the Latest FeaturesComplies with PCI Express Revision 1.1Throughput up to 2.5 GbpsCompatible with industrial standard 16450/16550 UARTOn-chip 256-byte depth FIFO in transmit and receive paths of each portSupports hardware and software flow controlSupports 5-, 6-, 7- and 8-bit serial formatsSupports Even, Odd, None, Space and Mark paritySupports 1- or 2-stop bit operationSupports re-map function for legacy ports

The PCI-D9-02-LP 2-Port DB9 Serial PCI Card adds two DB9 serial ports to your computer or server. By adding the PCI-D9-02-LP to a computer with no DB9 ports or not enough of them, you can upgrade your DB9 capability without having to buy a new computer.Perfect for home or office, the PCI-D9-02-LP supports data transfer rates up to 115.2 Kbps on each port. It easily installs inside your computer in just a few minutes. The low-profile bracket’s interface is compatible with universal 3.3V and 5V 32-bit PCI/PCI-X slots. Allow the appropriate drivers to automatically install on your hard drive (a driver CD is included if they don’t), and connect DB9 serial extension cables (such as P520-006) to the card’s DB9 connectors.The PCI-D9-02-LP is fully compliant with PCI Local Bus Specification Revision 2.3 and compatible with industrial standard 16550 UART. On-chip 256-byte depth FIFO in transmit and receive paths of each port. Supports hardware and software flow control; PCI IRQ sharing and PCI power management; 5-, 6-, 7-, 8- and 9-bit serial formats; Even, Odd, None, Space and Mark parity; and 1- or 2-stop bit operation.Adds 2 DB9 (RS-232) Serial Ports to Your ComputerUpgrades your DB9 capability without buying a new computer or serverEach port supports data transfer rates up to 115.2 KbpsPerfect for home or office useLow-profile bracket to fit shorter casesEasy to Install Inside Your ComputerCompatible with universal 3.3V and 5V 32-bit PCI/PCI-X slotsAppropriate drivers install to your hard drive automaticallyLoaded with the Latest FeaturesComplies with PCI Local Bus Specification Revision 2.3Compatible with industrial standard 16550 UARTOn-chip 256-byte depth FIFO in transmit and receive paths of each portSupports hardware and software flow controlSupports PCI IRQ sharing and PCI power managementSupports 5-, 6-, 7-, 8- and 9-bit serial formatsSupports Even, Odd, None, Space and Mark paritySupports 1- or 2-stop bit operation

Tripp Lite’s SUDC208V42P Power Distribution Cabinet supports 20-60kVA 3 phase UPS power distribution in critical datacenter equipment racks. Full size rack enclosure with pre-installed 42 pole circuit breaker panel supports 3 phase 208V and single phase 208V and 120V output via optional corded receptacle whips. Breaker panel includes 225A 3 pole main breaker, ground and neutral bars, plus 1/2 and 3/4 inch knockouts. Rack enclosure offers secure front and rear doors, removable side panels and shares common dimensions and overhead wiring tray accessories as Tripp Lite SR42UB rack enclosures. Compatible with Tripp Lite SUBB-series breakers, SUWL-series corded receptacle whips and a full line of compatible basic, metered, monitored and switched PDUs to support a variety of advanced network configurations.- SUDC208V42P Power Distribution Cabinet supports 20-60kVA 3 Phase UPS power distribution in critical datacenter equipment racks- Full size rack enclosure with pre-installed 42 pole circuit panel supports 3PH 208V and 1PH 208V and 120V via optional corded receptacle whips- Line up and match power distribution cabinet blends with existing standard datacenter racks for an aesthetically pleasing appearance while providing convenient connectivity between the centralized 3 phase UPS and protected electronic devices in equipment racks- Breaker panel includes 225A 3 pole main breaker, ground and neutral bars, 1/2 and 3/4 inch knockouts (see Help & Downloads for manual with detailed wiring information)- Rack enclosure offers secure front and rear doors, removable side panels and shares common dimensions and overhead wiring tray and ladder accessories as Tripp Lite SR42UB equipment racks- Requires appropriate SUBB-series output circuit breakers (see Related Items for list of compatible SUBB breakers)- Optional SUWL-series cable whips and SUWEL-series extensions support a variety of connector types, voltages and cable lengths (see Related Items for list of compatible SUWL-series and SUWEL-series cabling accessories)

Improve the organization and appearance of your rack in seconds, with a tool-less vented blanking panelThe RKPNLTL2UV 2U Tool-Less Vented Rack Panel mounts to a standard 19" 2 or 4-post rack to improve the organization and appearance of your rack in seconds. This TAA compliant product adheres to the requirements of the US Federal Trade Agreements Act (TAA), allowing government GSA Schedule purchases.The blank rack panel offers a tool-less design to save you time through simple installation or removal, with locking pins that secure into place with a quarter-turn. The panel is made of high-quality steel for long-term durability, plus the vented design allows for unobstructed airflow through your rack.Backed by a StarTech.com 2-year warranty.The StarTech.com Advantage

NetShelter CX 18U Secure Soundproof Server Room in a Box Enclosure InternationalSpecialized enclosures with integrated cooling, noise dampening, and power distribution for server and network applications in office environments.Includes: Casters, Key(s), Leveling feet, Rack Power Distribution Unit (PDU), Side Panels, Unpacking sheet

NetShelter CX 24U Secure Soundproof Server Room in a Box EnclosureSpecialized enclosures with integrated cooling, noise dampening, and power distribution for server and network applications in office environments.Includes : Casters , Key(s) , Leveling feet , Rack Power Distribution Unit (PDU) , Side panels , Unpacking sheet- Acoustic foam lining for noise dampeningSuperior noise reduction of installed IT equipment allowing the enclosure to be placed in a quiet environment.- Adjustable equipment mounting railsThe equipment mounting rails, front and rear, are fully adjustable for various mounting depths, for rear-facing equipment mounting or additional clearance from the front door. Maximum rack depth 88 cm/34.6 in. Minimum rack depth 12 cm/4.7 in.- Dedicated rear cable access pointThe cable port has a capacity of up to 400 cables and is situated perfectly for ground or under-floor cabling.- Integrated heat removalHigh efficiency fan modules remove heat and eliminate the need to purchase a costly cooling unit for your IT equipment.- Integrated power distributionProvided with a rack power distribution unit servers and other equipment are ready for deployment.- Light oak veneer finishThe enclosure blends discretely into almost any office environment.- Removable side panelsProvides customers with easy accessibility to equipment.- Six vertical 0U accessory channelsProvides multiple mounting locations for cable management accessories and rack PDUs without using critical equipment space.Agility- Acoustic foam lining for noise dampeningSuperior noise reduction of installed IT equipment allowing the enclosure to be placed in a quiet environment.- Light oak veneer finishThe enclosure blends discretely into almost any office environment.- Lockable front doorsProtect IT equipment from unwanted access- Toolless Rack Mounting CapabilitiesServer cases do not require additional tools to mount into NetShelter Enclosures, which allows the users to quickly and easily mount units in the rear of the enclosure.- Plug and Play setupFast and Easy set up

NetShelter CX 24U in colour White- Acoustic foam lining for noise dampeningSuperior noise reduction of installed IT equipment allowing the enclosure to be placed in a quiet environment.- Adjustable Front Vertical Mounting RailThe front mounting rails can be adjusted to allow for various mounting depths and to allow for additional clearance from the front door.- Dedicated rear cable access pointThe cable port has a capacity of up to 400 cables and is situated perfectly for ground or under-floor cabling.- Four vertical 0U accessory channelsProvides multiple mounting locations for cable management accessories and rack PDUs without using critical equipment space.- Integrated heat removalHigh efficiency fan modules remove heat and eliminate the need to purchase a costly cooling unit for your IT equipment.- Integrated power distributionProvided with a rack power distribution unit servers and other equipment are ready for deployment.- Lockable front doorsProtect IT equipment from unwanted access- Removable side panelsProvides customers with easy accessibility to equipment.Agility- Lockable front doorsProtect IT equipment from unwanted access- Toolless Rack Mounting CapabilitiesServer cases do not require additional tools to mount into NetShelter Enclosures, which allows the users to quickly and easily mount units in the rear of the enclosure.- Plug and Play setupFast and Easy set up- Light oak veneer finishThe enclosure blends discretely into almost any office environment.- Acoustic foam lining for noise dampeningSuperior noise reduction of installed IT equipment allowing the enclosure to be placed in a quiet environment.

Net Weight 2.32 KGMaximum Height 120.00 mmMaximum Width 460.00 mmMaximum depth 230.00 mmShipping Weight 2.50 KGShipping Height 125.00 mmShipping Width 465.00 mmShipping Depth 305.00 mmUnits per Pallet 1.00

The high-performance PCE-1G-01 1-Port Gigabit Ethernet PCI Express Card adds a 10/100/1000 Mbps network card and RJ45 Ethernet port to your computer or server. By adding the PCE-1G-01 to a computer with either no networking capabilities or 10/100 Ethernet, you can upgrade to Gigabit Ethernet capability without having to buy a new computer. It supports 10/100/1000 Mbps data rate auto-negotiation.Perfect for home or office, the PCE-1G-01 lets you connect to your high-speed LAN at Gigabit speeds up to 1000 Mbps. It easily installs inside your computer in just a few minutes. The standard bracket’s one-lane (x1) interface is compatible with x4, x8 and x16 PCIe slots. Allow the appropriate drivers to automatically install on your hard drive (a driver CD is included if they don’t), and connect a Cat5e/6 patch cable between the card’s RJ45 slot and your network. An LED indicates successful connection and network activity.The PCE-1G-01 is backward compatible with 10/100 Mbps networks and complies with PCI Express Revision 1.1. Fully compliant with IEEE 802.3, 802.3u and 802.3ab. Supports IEEE 802.3x full-duplex flow control, 802.1p Layer 2 priority encoding, 802.1a VLAN tagging, crossover detection and auto correction (auto MDI/MDI-X), Wake-on-LAN (WoL) and 9K Jumbo Frames.Adds 10/100/1000 Mbps Network Card and Ethernet Port to Your ComputerUpgrades your system to Gigabit Ethernet capability without buying a new computer or serverSupports 10/100/1000 Mbps data rate auto-negotiationPerfect for home or office useEasy to Install Inside Your Computer1-lane (x1) interface compatible with x4, x8 and x16 PCIe slotsAppropriate drivers install to your hard drive automaticallyLED indicates successful connection and network activityLoaded with the Latest FeaturesComplies with PCI Express Revision 1.1Fully compliant with IEEE 802.3, 802.3u and 802.3abSupports IEEE 802.3x full-duplex flow control, 802.1p Layer 2 priority encoding and 802.1a VLAN taggingSupports crossover detection and auto correction (auto MDI/MDI-X)Supports Wake-on-LAN (WoL) and 9K Jumbo FramesBackward compatible with 10/100 Mbps networks

The SmartRack® 42U Standard-Depth 4-Post Premium Open Frame Rack houses 3,000 pounds (1360.8 kilograms) of standard 19-inch rack equipment in 42U. It is an expansion model that comes without sides, doors or roof. The front and rear pairs of vertical rails have square mounting holes that are adjustable in quarter-inch increments from four to 37 inches. Adjustment is quick and an easy-view depth index ensures consistent rail placement without requiring time-consuming measurements. Each rack space within the enclosure is numbered for ready reference and supports tool-less button-mount 0U installation of up to four compatible PDUs and cable managers. All components of the SR42UWEXPNDNR3 are grounded to the enclosure frame. Front and rear threaded grounding points are provided for connection to the facility earth ground. To simplify deployment, the SR42UWEXPNDNR3 comes with preinstalled casters that enable it to be easily maneuvered into the desired location, where it can be secured by adjusting the preinstalled levelers. Note: The casters are intended for minor position adjustments and are not designed for moving the enclosure over long distances.Ships fully assembled for rapid deployment and roll into place on 3" heavy-duty pre-installed casters (casters are removable)Front and rear sets of equipment mounting rails adjust in 1/4" increments. Adjustment is quick and convenient. The easy-view depth index ensures consistent rail placement without requiring time-consuming measurements.Tool-less accessory mounting rails (2 rails per enclosure) include slots for quick installation of compatible PDUs and vertical cable managers. Mounting slots are arranged in an industry-standard pattern compatible with a wide variety of accessories. Each rail can accommodate two vertical PDUs or cable managers side-by-side (four items per enclosure).Enclosure includes mounting hardware of 50 pieces of M6 cage nuts and 50 pieces of M6 screwsTextured powder coat finish for tough resistance to environmental concerns such as deployment in warehouses.Maximum usable internal depth of 37 inches/94 cm (front to rear rail).Weight ratings of 3000 lbs (1360.8 kgs) stationary and 3000 lbs (1360.8 kgs) rolling.Built in baying tabs allow premium open frame racks to be combined securely in rows. Center-to-center width can be set at 600mm or 24" to match standard data center floor tiles.Leveling feet extend to allow premium open frame racks to be positioned on uneven floors. Levelers are removable.Compact design allows the premium open frame racks to roll through standard height commercial doorways.Convenient grounding system. All components are grounded to the premium open frame rack structure which includes multiple connections for facility ground.Open top and bottom for cable access.Included stabilizing brackets are used for shipment and can be reattached at the bottom of the premium open frame rack on the inside or outside of the rack.Compatibility with all cable management accessories.