Showing 22890–22900 of 30602 results

Add two flushmount USB 3.0 (USB 3.2 Gen 1) ports to your ExpressCard-enabled laptopThe ECUSB3S254F 2-Port Flush Mount USB 3.2 Gen 1 ExpressCard Adapter lets you add two USB 3.2 Gen 1 ports to your ExpressCard-enabled laptop.The USB 3.2 Gen 1 card uses a unique design that allows it to sit flush in a standard 54mm laptop ExpressCard slot, creating a seamless add-on that can be left installed even while on the move, without having to worry about impact damage to either the card or the ExpressCard slot.Enhanced with UASP support (USB Attached SCSI Protocol), this USB 3.2 Gen 1 controller performs up to 70% faster than conventional USB 3.2 Gen 1 when paired with a UASP supported enclosure (Note: UASP requires a compatible operating system). Using a more efficient protocol than the traditional USB BOT (Bulk-Only Transport), UASP technology optimizes transfers by allowing multiple commands to be processed simultaneously, significantly increasing transfer speeds for less wait time on data transfers. See our UASP test results below for further details.The SuperSpeed USB 3.2 Gen 1 Card supports data transfer rates of up to 5Gbps, and is backward compatible with USB 2.0 (at up to 480Mbps), or USB 1.1/1.0 at up to 1.5/1.2 Mbps respectively - the perfect laptop accessory for users to connect USB devices, both new and old.Backed by a StarTech.com 2-year warranty and free lifetime technical support.Improved Performance with UASPUASP is supported in Windows® 8 and Server 2012. In testing UASP performed with up to a 70% faster read / 40% faster write speed over traditional USB 3.2 Gen 1 at peak performance.At the same peak in testing, UASP also showed up to an 80% reduction in required processor resources.Test results were obtained using an Intel® Ivy Bridge system, StarTech.com add-on USB 3.2 Gen 1 cards, a UASP-enabled StarTech.com enclosure, and a SATA III solid state drive.The StarTech.com Advantage

Convert an M.2 solid state drive into a standard 2.5in form factor 6Gbps SSDVastly increase system performance by replacing your 2.5” SATA hard drive with an M.2 solid state drive, using the SAT2M2NGFF25 M.2 SSD to SATA adapter.The M.2 to SATA adapter features an enclosed housing that adds protection to your NGFF (Next Generation Form Factor) SSD. The added protection gives you the peace of mind to confidently use your M.2 drive in applications that require an added level of durability such as hot-swap drive bays, or external SATA docking stations.Using an M.2 SSD in place of a platter drive better utilizes the full potential of your SATA III controller, by reducing your data transfer bottleneck with file transfer speeds up to 6 Gbps -- an ideal solution for further increasing the performance of a HyperDuo array.For wide compatibility with all of the common M.2 solid state drives, the SAT2M2NGFF25 supports multiple drive heights including: 2230, 2242, 2260, 2280.The SAT2M2NGFF25 is backed by a StarTech.com 2-year warranty, and lifetime technical support.The StarTech.com Advantage- Added protection for your SSD with enclosed housing- Maximize system performance by replacing you 2.5in SATA platter drive with an M.2 SSD- Broad compatibility with support for the most common M.2 NGFF SSD heights (2242, 2260, 2280)

Features- Local and Remote Units connect at distances up to 150 m using Cat 5e cable- Adjustable gain control - automatically and manually adjust signal strength to compensate for distance- Dual console operation - control your system from both the local and remote keyboard, monitor, and mouse consoles- Built-in ASIC for greater reliability and compatibility- Auto Signal Compensation (ASC) and storage of settings- RS-232 serial ports - connect to a serial terminal, or serial devices such as touchscreens and barcode scanners (Baud Rate 115200 bps)- Audio Enabled - supports stereo speakers and microphone- Pushbutton operating mode selection (Local Unit only) - select between Local and Auto operating modes, with the press of a single button- Built-in 8KV/15KV ESD protection (Contact voltage 8KV; Air voltage 15KV) and 2KV surge protection- Superior video quality - 1920 x 1200@60Hz(30 m), 1600 x 1200@60Hz(150 m)- Superior Audio - no loss in audio quality at 150 m- Supports Wide Screen formats- Supports VGA, SVGA, SXGA (1280 x 1024), UXGA (1600 x 1200), WUXGA (1920 x 1200) and multisync monitors; local monitor supports DDC; DDC2; DDC2B- Hot pluggable- Rack mountable- Easy to install - no software required - connecting cables to the devices is all it takesPackage Contents- 1x CE350L PS/2 KVM Extender (Local Unit)- 1x CE350R PS/2 KVM Extender (Remote Unit)- 1x 2L-5302P PS/2 KVM Cable Set (1.8 m)- 2x 0AD6-1605-24EG Power Adapters- 1x Mounting Kit- 1x User Instructions

The CE604 is a DVI Dual View USB based KVM Extender that features Dual View functionality, which enables the video output to seamlessly display on two monitors. With RS-232 serial functionality, it allows access to a computer system from a remote console up to 60 m away. The CE604 is built for control and security purposes, and is targeted towards financial and industrial markets.The CE604 is equipped with an RS-232 serial channel that connects to a serial terminal or to serial devices, such as touch screens and barcode scanners. In addition, it supports an advanced PC Wake Up feature, which allows you to simply press a pushbutton from the remote dual view console to wake a PC at the local site. The CE604 eliminates the need for traveling back and forth between the local computer and remote console, making it an effi cient and flexible solution. The CE604 is ideal for applications that require the console to be in a conveniently accessible location, while the system equipment needs to reside in a safe place – away from dust, dirt and harsh environmental influences. It also provides a cost-effective way of keeping sensitive data, such as financial and personal information, safe in a heavily secured data center, while still allowing remote access to users.

This Sku combines following items:- 1-CL5708M: 8-Port LCD KVMP- 2-2L5201U 4 ft. USB KVM Cable- 4-2L5202U 6 ft. USB KVM Cable- 2-2L5203U 10 ft. USB KVM CableThe CL5708 Slideaway™ LCD KVM Switch is a control unit that allows access to multiple computers from a single PS/2 or USB KVM (keyboard, video, and mouse) console. A single CL5708 can control up to 8 computers. As many as 31 additional KVM switches can be daisy-chained to the CL5708, so that up to 256 computers can all be controlled from a single KVM console.