Tripp Lite N201-050-GY-P networking cable Gray 600" (15.2 m) Cat6/6e/6a
Tripp Lite N201-050-GY-P. Cable length: 600" (15.2 m), Cable standard: Cat6/6e/6a, Connector 1: RJ-45, Connector 2: RJ-45, Product color: Gray
Tripp Lite N201-100-GY-P networking cable Gray 1181.1" (30 m)
CMP plenum-rated, pre-terminated Cat6 patch cableProtective, flexible bootCat6 rated "staggered" RJ45 plugs for greatly reduced NEXT
Tripp Lite N204-003-BL-UP networking cable Blue 35.8" (0.91 m) Cat6
3-ft. (0.91 m) Blue Cat6, Up Angle to Straight RJ45 - RJ45 Patch cablePVC 4 Pair Stranded Conductors, 24AWGFully Molded EndsETL Verified to TIA/EIA -568-B550Mhz Gigabit Speed Rated
Tripp Lite N204-010-BL-RA networking cable Blue 120.1" (3.05 m) Cat6
10-ft. (3.05 m) Blue Cat6, Right Angle to Straight RJ45 - RJ45 Patch cablePVC 4 Pair Stranded Conductors, 24AWGFully Molded EndsETL Verified to TIA/EIA -568-B550Mhz Gigabit Speed Rated
Tripp Lite N235-001-SH wire connector RJ45 Silver
Use this Cat6 Straight-Through Shielded Coupler to extend the length of Cat6 shielded Ethernet cables or use in standard data wall plates to provide feed-through patching. Keystone design allows the coupler to be used as a stand-alone unit, mounted in a face plate or blank keystone-type patch panel. Meets EIA/TIA Cat6 specifications. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.
Tripp Lite N266-007 networking cable Beige 83.9" (2.13 m) Cat5
These T1, RJ45-RJ45 ( RJ48C ) cross-over Ethernet cables are constructed with premium Quabbin 9720, T1 certified cable. Two individually shielded, 22 AWG, 100 ohm pairs maximize the performance of your expensive T1 circuits and equipment. Beware of generic T1 Ethernet cables made with inexpensive Cat5 unshielded Ethernet cable. The American National Standards Institute (ANSI) states in ANSI T1.403 that T1 cable be constructed of two balanced pairs, 22 AWG Solid conductor, 100 ohm impedance, with a loss budget of 5.5 db. Cross-over wiring configuration available in 3-foot (0.9-meter), 5-foot (1.5-meter), 7-foot (2.1-meter) and 10-foot (3.1-meter) lengths. Custom lengths available. Consult your reseller. Also available in straight-through wiring configuration. See N265-Series T1 Ethernet cables.
Tripp Lite N266-010 networking cable Beige 120.1" (3.05 m) Cat5
These T1, RJ45-RJ45 ( RJ48C ) cross-over Ethernet cables are constructed with premium Quabbin 9720, T1 certified cable. Two individually shielded, 22 AWG, 100 ohm pairs maximize the performance of your expensive T1 circuits and equipment. Beware of generic T1 Ethernet cables made with inexpensive Cat5 unshielded Ethernet cable. The American National Standards Institute (ANSI) states in ANSI T1.403 that T1 cable be constructed of two balanced pairs, 22 AWG Solid conductor, 100 ohm impedance, with a loss budget of 5.5 db. Cross-over wiring configuration available in 3-foot (0.9-meter), 5-foot (1.5-meter), 7-foot (2.1-meter) and 10-foot (3.1-meter) lengths. Custom lengths available. Consult your reseller. Also available in straight-through wiring configuration. See N265-Series T1 Ethernet cables.
Item(s) added to cart
Netgear GS105E-200NAS ProSafe Plus Switch, 5-Port Gigabit Ethernet - 5 Ports - 2 Layer Supported - Wall Mountable - Lifetime Limited Warranty-None Listed Compliance
MFR: Netgear, Inc
Qty: 1
Part #: GS105NA