Showing 24240–24250 of 38120 results

RapidRun® is designed to be the standard for in-wall audio/video installations. Using pre-terminated Break-away flying leads and wall plates with an in-wall runner ensures flexible, efficient, high quality connections for all types of equipment, with no field terminations.Use this Plenum-rated Multi-Format Runner for in-wall installations that support high density, multi-format applications. Whether hanging a projector in a modern 21st century classroom or installing a commercial digital signage system, a clean, crisp signal will be delivered every time.

Adapt an existing DB9M/M cableWith DB9 cables from Cables To Go you will no longer sacrifice convenience when it comes to the placement of computer peripherals in your work area! Let us give you the flexibility to add an existing piece of hardware wherever you need it. Our DB9 extension cables can convert your existing connections or replace the cables that restrict you. Each extension cable comes fully shielded to prevent against unwanted EMI/RFI interference, and its fully-molded design delivers excellent strain relief.

For voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 125 MHz. Meets ANSI/TIA-568-C.2 Cat5e standard and the stringent TAA compliance requirements for anyone who needs to procure products exclusively manufactured in countries on the Trade Agreement Act list. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels. Available in a variety of colors to easily color-code your network installation.

This cost-effective wire provides maximum sound for your dollar. Clear PVC jacket with white marker enables easy polarity identification. The high strand count offers maximum flexibility for easier installations. For the two 18 AWG conductors, each conductor is manufactured from 3 bundles of 24 copper strands. Cross section of the wire is 0.10in x 0.20in.

OverviewAdapt RapidRun PC (yellow) runner cables to Multi-format (orange) flying leads and wall plates. Ideal for situations when replacing existing PC flying leads and wall plates with Multi-format flying leads and wall plates.If PC (yellow) flying leads/wall plates are used with a Multi-Format (orange) runner, then an adapter must be used on both ends of the runner cable. This adapter requires that a PC (yellow) flying lead/wall plate be used on both ends of the runner cable.

DB25 Male to Female cables from Cables To Go are designed for RS-232 serial or parallel extension applications. Extend your existing cables easily and at a lower cost than buying a new cable. All 25 lines are wired straight through pin-to-pin for ease of compatibility. Each cable is constructed with molded connectors and foil shielding for EMI/RFI protection.

The Value Series S-Video+Audio to 3 RCA Adapter Cable allows you to connect your multimedia PC to your television with ease. This precision-engineered adapter cable connects the S-Video out of your computer to a TV, thus eliminating the need for several cables and/or adapters. This bi-directional cable converts S-Video to composite RCA or vice-versa without an expensive active converter. This quality 75ohm coax cable is double-shielded with 85% aluminum foil and braid to reduce unwanted noise and distortion. The Y/C signal separation circuitry provides a bright, crisp picture from your PC. In addition to fitting standard S-Video jacks, the cable fits both 7-pin and 4-pin jacks on desktops and notebooks with a TV out jack. Ordinary, "included in the box" S-video and composite RCA cables often use low-quality materials with inferior shielding that can result in poor sound and picture quality.

Digital Visual Interface (DVI) is the standard interface for a high-performance connection between PCs and flat panel displays, digital CRT displays, projectors, and HDTV. DVI-D Digital Extension Cables from Cables To Go deliver the high-performance, high-bandwidth interface needed for video displays of today while leaving headroom for the products of tomorrow. These precision-engineered cables are fully compliant with the DVI standard defined by DDWG (Digital Display Working Group). The DVD-D dual link configuration provides enough bandwidth for resolutions up to 2048 x 1536 and allows high speed digital transmission up to 9.9 Gbps.Note: DVI-D (digital) has a length limitation of 5 meters. Although there are some applications where longer cables are applicable, these are the exception rather than the rule. If you have a need for a digital DVI length longer than 5 meters, please consult your hardware manufacturer to confirm compatibility. We cannot guarantee a quality image beyond 5 meters.

Velocity™ 3.5mm Mono Cables from Impact Acoustics are specifically designed to provide quality signal transfer for mono audio and data transfer applications. The 3.5mm cable lets you connect components utilizing a 3.5mm serial data jack such as whole house automation systems or any mono audio device such as a phone system. These cables feature a 27-gauge Oxygen Free Copper conductor, a drain wire, and an Aluminum Foil Shield to reject noise, and Gold plated connectors to ensure a quality connection. - Connectors: 3.5mm Mono Male to 3.5mm Mono Male - Fully molded connectors provide strain relief - Foil shielded to prevent unwanted EMI/RFI interference - Gold-Plated connectors

Build USB functionality into a custom system in the form of a secure and efficient fixed port. Provide access to a PC, printer, projector, or other device with minimal exposure or repositioning. From basic port re-routes in a PC, to connections at podiums and kiosks, panel-mount cables are a great way to keep your connections clean and professional. Featuring molded screw-style connectors and USB 2.0 compatibility, these cables are available in various configurations and lengths to meet your exact specifications. Features: - Connectors: USB A female to USB B male - Molded hood provides easy connection to a faceplate or machined port - Twisted pair construction minimizes crosstalk and data transfer errors - Foil and braid shields prevent unwanted EMI/RFI interference - Fully compliant with USB 1.0, 1.1, and 2.0 specifications - Includes one pair of 4-40 screws and nuts