Showing 23150–23160 of 38167 results

Today's mission critical advanced Fast Ethernet and Gigabit computer networks require the stability and reliability of Enhanced Category 5 high-speed cabling to distribute data, voice and video. To protect your high-speed network from noise and electromagnetic interference, use Cables To Go's Shielded Enhanced Cat5 Patch Cables. Each cable meets all Cat 5e TIA/EIA standards. The molded boot provides extra strain-relief and durability. Cables To Go Shielded Enhanced Cat5 Patch Cables are available in a variety of colors to easily color-code your network installation. - Connector: Shielded 50-micron gold plated RJ-45 Male to Male - Conductor: 4-pair 24 AWG Stranded STP - Jacket: PVC - Molded boot provides extra strain-relief and durability - Foil shielding with drain wire - Applications: - 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3) - 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN - 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM - Voice - Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications in high-noise environments - Wired: TSB 568B (AT&T 258A) - Certifications: TIA/EIA

Fast, fast, fast - the three words that describe Cables To Go's Cat6 network cables. Perfect for distributing data, voice and video, these 550MHz rated patch cables ensure you always have the necessary throughput to handle today's and tomorrow's bandwidth-intensive applications. Each cable is fully tested and quality inspected, ensuring all EIA/TIA Cat 6 TIA/EIA- 568-B-2.1, draft 9 standards are met. Cat6 patch cords from Cables To Go drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire, which ensures error-free transmission! Constructed with high-quality cable and a shortened body plug, this design will keep Near-End Crosstalk (NEXT) levels to a minimum. Our all-new molded, snag-free "clip" prevents unwanted cable snags during installation without impairing your ability to insert and remove the connector from the port. It also provides unparalleled strain-relief, so that the cable is not damaged even when pulled on excessively. - Connector: 50-micron gold plated RJ-45 Male to Male - Conductor: 24 AWG Stranded Copper - Jacket: PVC - All-new molded, snag-free boot prevents unwanted cable snags while providing easy insertion and extraction from network ports - Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications - Perfect for Gigabit, Fast Ethernet, and Ethernet applications

Fast, fast, fast - the three words that describe Cables To Go's Cat6 network cables. Perfect for distributing data, voice and video, these 550MHz rated patch cables ensure you always have the necessary throughput to handle today's and tomorrow's bandwidth-intensive applications. Each cable is fully tested and quality inspected, ensuring all EIA/TIA Cat 6 TIA/EIA- 568-B-2.1, draft 9 standards are met. Cat6 patch cords from Cables To Go drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire, which ensures error-free transmission! Constructed with high-quality cable and a shortened body plug, this design will keep Near-End Crosstalk (NEXT) levels to a minimum. Our all-new molded, snag-free "clip" prevents unwanted cable snags during installation without impairing your ability to insert and remove the connector from the port. It also provides unparalleled strain-relief, so that the cable is not damaged even when pulled on excessively. - Connector: 50-micron gold plated RJ-45 Male to Male - Conductor: 24 AWG Stranded Copper - Jacket: PVC - All-new molded, snag-free boot prevents unwanted cable snags while providing easy insertion and extraction from network ports - Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications - Perfect for Gigabit, Fast Ethernet, and Ethernet applications

Stop struggling with Toslink cables being too close to the wall or the back of your cabinet. Our right angle adapter aids in connecting cables in tight and congested spaces. It enables you to correctly orient your cable so less strain occurs on the connector. Has gold-plated collets and a black PVC outer shell for longer life. Ideal for home theater and Dolby® Digital® systems.

High-quality 75 ohm BNC cables for video applications including CCTV, broadcast, studio, boardroom presentation, home theater, etc. Manufactured from coax cable and nickel plated BNC connectors. A molded PVC strain relief protects the cable from wear over time.- 75 ohm RG-59/U cable- Dual shield cable; 60% copper braid over foil- 22AWG copper covered steel center center conductor- Bright nickel finish BNC connector

Value Series RCA Audio Cables allow you to connect your VCR, DVD player, satellite/cable receiver and other a/v equipment with ease. These cost conscious cables are of high quality giving you crisp, clear sound for less. The dual conductor is spiral-wrapped with tinned-copper, which provides shielding against EMI and RFI interference. The connectors are color-coded for easy installation and identification and provide excellent strain relief. Dual RCA Audio Cables are used to connect the composite audio signal from the left and right channels on your A/V equipment.

Constructed with 50/125 micron cableLength - 1MUse on fiber and fibre channel installationsSC male to SC male connectorsHigher bandwidth optimized for Gigabit and 10Gbps networksBackward compatible with 62.5 micron fiberBuilt-in headroom for future applicationsNumber of fibers: 2Fiber type: all glass graded indexCore diameter: two 50+/-3 micronsCLAD diameter: 125+/-2 micronsPrimary coating diameter: 245+/-15 micronsPrimary coating material: acrylateSecondary coating diameter: 900+/-50 micronsSecondary coating material: PVCAttenuation @850NM: 3.5DB/KM maximum, @1300NM: 1.0DB/KM maximumBandwidth @850NM: 220 MHz-KM minimum, @1300NM: 600 MHz-KM minimumNumeric aperture: .275 nominalProof test level: 100,000 PSIInsertion loss testing performed on every connector (0.2db typical) and provided with cableBeveled edge on ends of glass makes insertion of plug a breeze

Constructed with 50/125 micron cableLength - 2MUse on fiber and fibre channel installationsSC male to LC male connectorsHigher bandwidth optimized for gigabit and 10Gbps networksBackward compatible with 62.5 micron fiberBuilt-in headroom for future applicationsNumber of fibers: 2Fiber type: all glass graded indexCore diameter: two 50+/-3 micronsCLAD diameter: 125+/-2 micronsPrimary coating diameter: 245+/-15 micronsPrimary coating material: acrylateSecondary coating diameter: 900+/-50 micronsSecondary coating material: PVCAttenuation @850NM: 3.5DB/KM maximum, @1300NM: 1.0DB/KM maximumBandwidth @850NM: 220 MHz-KM minimum, @1300NM: 600 MHz-KM minimumNumeric aperture: .275 nominalProof test level: 100,000 PSIInsertion loss testing performed on every connector (0.2db typical) and provided with cableBeveled edge on ends of glass makes insertion of plug a breeze

Constructed with 50/125 micron cableLength - 5MUse on fiber and fibre channel installationsSC male to LC male connectorsHigher bandwidth optimized for gigabit and 10Gbps networksBackward compatible with 62.5 micron fiberBuilt-in headroom for future applicationsNumber of fibers: 2Fiber type: all glass graded indexCore diameter: two 50+/-3 micronsCLAD diameter: 125+/-2 micronsPrimary coating diameter: 245+/-15 micronsPrimary coating material: acrylateSecondary coating diameter: 900+/-50 micronsSecondary coating material: PVCAttenuation @850NM: 3.5DB/KM maximum, @1300NM: 1.0DB/KM maximumBandwidth @850NM: 220 MHz-KM minimum, @1300NM: 600 MHz-KM minimumNumeric aperture: .275 nominalProof test level: 100,000 PSIInsertion loss testing performed on every connector (0.2db typical) and provided with cableBeveled edge on ends of glass makes insertion of plug a breeze

Constructed with 50/125 micron cableLength - 3MUse on fiber and fibre channel installationsLC male to LC male connectorsHigher bandwidth optimized for gigabit and 10Gbps networksBackward compatible with 62.5 micron fiberBuilt-in headroom for future applicationsNumber of fibers: 2Fiber type: all glass graded indexCore diameter: two 50+/-3 micronsCLAD diameter: 125+/-2 micronsPrimary coating diameter: 245+/-15 micronsPrimary coating material: acrylateSecondary coating diameter: 900+/-50 micronsSecondary coating material: PVCAttenuation @850NM: 3.5DB/KM maximum, @1300NM: 1.0DB/KM maximumBandwidth @850NM: 220 MHz-KM minimum, @1300NM: 600 MHz-KM minimumNumeric aperture: .275 nominalProof test level: 100,000 PSIInsertion loss testing performed on every connector (0.2db typical) and provided with cableBeveled edge on ends of glass makes insertion of plug a breeze