Showing 20980–20990 of 38119 results

Product Features- Connect the USB-Micro B port of a smartphone, tablet or other mobile device to a USB Type-C port- Designed to support USB 2.0 communication and features- Backwards compatible with USB 2.0 and USB 1.1 devices- Color coded white and labeled to designate USB 2.0 feature supportProduct DescriptionThis USB 2.0 USB-C to USB-Micro B cable is the perfect solution for connecting a smartphone, tablet, or other device that has a USB-Micro B port to a computer, tablet or other device that has a USB Type-C port for USB 2.0 communication. The color coded USB Type-C connector allows this cable to be easily identified as a USB 2.0 cable and differentiated from other cables which may support a different feature set. The USB Type-C connector is smaller than traditional USB connector and features a symmetrical design which allows it to be easily connected on the first try. Additionally, the durability of the USB Type-C connector allows for up to 10,000 connection cycles. This cable supports a data rate up to 480Mbps for data transfer and sync with 5 volts and 1 amp of power for device operation and charging.

Velocity™ S-Video Interconnects from Impact Acoustics provide the perfect solution for connecting extended definition video recorders or digital satellite systems to your a/v receiver or television/monitor. Carefully designed dual 75-ohm precision video conductors ensure optimal video quality. Individually shielded Y (luminance) and C (chrominance) conductors are combined with an overall aluminum foil and OFC braid shield to protect against radio frequency interference (RFI) and electromagnetic interference (EMI). These cost-effective high-performance cables ensure maximum video quality when compared with s-video cables typically included with consumer electronics products. In addition to fitting standard 4-pin S-Video jacks, the Velocity S-video cable fits most 7-pin jacks found on desktop and notebook PC’s with a TV out jack. Features: - Connectors: 4-pin DIN Male to 4-pin DIN Male. - Oxygen-free copper wire delivers all the detail, color and brightness you expect from your S-video component. - Precision-made 24K gold-plated connectors ensure long-lasting sound quality. - Fully molded connectors provide excellent strain relief. - Individually double-shielded 75-ohm coax conductors protect against induced noise or distortion. - Ultra-flexible PVC jacket for easy installation. - Connects digital camcorders, satellite receivers, DVD players, PC with TV out or any video source with S-video output jacks to television, monitor or A/V receiver with S-video input jacks.

Manage your power more efficiently with the Cables To Go Flat Plug Power Strip Plus. This handy cable features a flat male 3-prong plug on one end and a straight female 3-prong plug on the other. Simply plug the power cord male prong into an outlet and you’re ready to power your devices. Saves space and keeps your surge strip and UPS outlets from being block by bulky AC transformers. The flat male connector allows the cable to easily plugging into surge protectors and UPS outlets. Ideal for use in compact workplaces or home offices where there is a need to run electronic equipment in a limited space.

Turns one outlet into two, keeping your surge strips and UPS outlets free! Manage your power more efficiently with the Cables To Go 1-to-2 Power Cord Splitter. This splitter features one male 3-prong plug which splits to two female 3-prong plugs. Simply plug the power cord splitter’s male prong into an outlet and you’re ready to power multiple electronic devices. Saves space by eliminating extra cords and it keeps your surge strips and UPS outlets free. This cord is ideal in a compact workplace or home office where there is a need to run electronic equipment in a limited space.

And ideal solution for powering digital signage components Manage your power more efficiently with the Cables To Go 1-to-2 Power Cord Splitter. This splitter features one male 3-prong plug which splits to one female NEMA 5-15R plug and one female IEC320 C13 plug. Simply plug the power cord splitter’s male prong into an outlet and you’re ready to power multiple electronic devices. Saves space by eliminating extra cords and it keeps your surge strips and UPS outlets free. This cord is ideal in a compact workplace or home office where there is a need to run electronic equipment in a limited space.

Fast, fast, fast - the three words that describe Cables To Go's Cat6 network cables. Perfect for distributing data, voice and video, these 550MHz rated patch cables ensure you always have the necessary throughput to handle today's and tomorrow's bandwidth-intensive applications. Each cable is fully tested and quality inspected, ensuring all EIA/TIA Cat 6 TIA/EIA- 568-B-2.1, draft 9 standards are met. Note: These cables are for 10/100 ethernet only and wil not work for gigabit ethernet since only two pairs of this cable are crossed. Cat6 patch cords from Cables To Go drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire, which ensures error-free transmission! Constructed with high-quality cable and a shortened body plug, this design will keep Near-End Crosstalk (NEXT) levels to a minimum. Our all-new molded, snag-free "clip" prevents unwanted cable snags during installation without impairing your ability to insert and remove the connector from the port. It also provides unparalleled strain-relief, so that the cable is not damaged even when pulled on excessively. - Connector: 50-micron gold plated RJ-45 Male to Male - Conductor: 24 AWG Stranded Copper - Jacket: PVC - All-new molded, snag-free boot prevents unwanted cable snags while providing easy insertion and extraction from network ports - Crossed pin configuration allows you to connect two computers "peer-to-peer" without the need for a hub or switch - Perfect for connecting network switches and hubs without an uplink port to other switches and hubs

The DisplayPort Female to Female Panel Mount Coupler is the perfect solution for combining two DisplayPort cables to achieve connectivity through a panel. This allows the user to provide display connectivity from a source that is contained within a secure location. The coupler is compact and designed for minimal signal loss. The passive design of this coupler allows it to support video resolutions of up to 1080p.

Today's advanced fast ethernet and gigabit computer networks require Enhanced Category 5 high-speed cabling to distrubute data, voice and video. Cables To Go's Enhanced Cat5 350Mhz Snagless Patch Cables will keep you ahead of the game. These cables will handle bandwidth intensive applications up to 350 Mhz and beyond. Each meets all Cat 5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire! Constructed with high-quality cable and a shortened body plug, this design will keep Near-End Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides extra strain-relief. Cables To Go 350Mhz Snagless Patch cables are available in a variety of colors to easily color-code your network installation.

Today's advanced fast ethernet and gigabit computer networks require Enhanced Category 5 high-speed cabling to distribute data, voice and video. Cables To Go's Enhanced Cat5 350Mhz Crossover Patch Cables will keep you ahead of the game. These cables will handle bandwidth intensive applications up to 350 Mhz and beyond. Each meets all Cat 5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire! Constructed with high-quality cable and a shortened body plug, this design will keep Near-End Crosstalk (NEXT) levels to a minimum. Cables To Go 350Mhz Crossover Patch cables are available in a variety of colors to easily color-code your network installation and are labeled as crossover for easy identification. With a Cables To Go Enhanced Cat5 350Mhz Crossover Patch Cable and a network adapter, you can easily network two Windows-based computers in a Peer-to-Peer Networking configuration. In addition, this cable can be used for hub-to-hub, transceiver-to-transceiver or repeater-to-repeater ethernet connections. - Connector: 50-micron gold plated RJ-45 Male to Male - Conductor: 4-pair 24 AWG Stranded Copper - Jacket: PVC Applications: - 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3) - 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN - 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM - Designed For: Peer-to-peer, hub-to-hub, transceiver to transceiver or repeater to repeater ethernet connection - Exceeds Category 5e specifications - Wired: TSB 568B (AT&T 258A) - Certification: TIA/EIA