Showing 30–40 of 9227 results

"Tripp Lite VS650T. UPS topology: Line-Interactive, Output power capacity: 0.65 kVA, Output power: 360 W. AC outlet types: NEMA 5-15R, Power plug: NEMA 5-15P, AC outlets quantity: 6 AC outlet(s). Form factor: Tower, Product color: Black, Cable length: 59.1"" (1.5 m). Width: 4"" (101.6 mm), Depth: 11.8"" (299.7 mm), Height: 5.6"" (142.2 mm). Master (outer) case width: 14.2"" (360.7 mm), Master (outer) case length: 23.6"" (599.4 mm), Master (outer) case height: 9.8"" (248.9 mm)"

iogear GPAWC20W mobile device charger White Indoor

"Tripp Lite BC350. Output power capacity: 0.35 kVA, Output power: 180 W, Input frequency: 60 Hz. Typical backup time at full load: 2.5 min, Typical backup time at half load: 10 min, Battery recharge time: 4 h. Product color: Black, Cable length: 70.9"" (1.8 m), Certification: UL1778/CSA/NOM/Class B. Width: 4.33"" (110 mm), Depth: 7.28"" (184.9 mm), Height: 4.13"" (104.9 mm). Master (outer) case width: 11.3"" (287 mm), Master (outer) case length: 23.5"" (596.9 mm), Master (outer) case height: 15.4"" (391.2 mm)"

Mitel AC Adaptor L6 48V NA

APC Back-UPS BE600M1, 600VA, 120V,1 USB charging portBattery Backup & Surge Protector for Electronics and ComputersAdjustable voltage sensitivityProvides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.Audible alarmsProvides notification of changing utility power and UPS power conditionsAutomatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenanceBuilding Wiring Fault IndicatorThis LED informs users of potentially dangerous wiring problems in the wall circuit.Cold-start capableProvides temporary battery power when the utility power is out.Disconnected battery notificationWarns when a battery is not available to provide backup power.Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replacedSimple battery replacementIncreases UPS availability by allowing quick, easy battery replacement.Transformer Block SpacingConnect bulky transformer block plugs without covering up other outlets.USB connectivityProvides management of the UPS via a USB port (not available on all models).

Quality and convenienceAn original APC Battery Replacement Cartridge offers safety, quality, convenience and is hot swappable. This means that the battery cartridge can easily be replaced by the user without turning off the UPS or bringing down the load.CompleteThis APC Battery Replacement Cartridge is ready-made, equipped with connectors and replaces the entire old cartridge in its entirety.Backwards compatibleThe APCRBC140 is the successor to the RBC44 and is backwards compatible.ApplicationAPC Battery Replacement Cartridge APCRBC140 is used in the SRT5KXLI, SRT5KRMXLI, SRT6KXLI, SRT6KRMXLI, SRT8KXLI, SRT8KRMXLI, SRT10KXLI, SRT10KRMXLI, SRT192BP, SRT192BP2, SRT192RMBP, SRT192RMBP2, SURTD3000XLI, among others. SURTD3000RMXLI, SURT3000XLI, SURT3000RMXLI, SURTD5000XLI, SURT6000XLI, SURT6000RMXLI, SURT8000XLI , SURT8000RMXLI, SURT10000XLI, SURT10000RMXLI, SURT192XLBP, SURT192RMXLBP, SURT192RMXLBP3U, SURT192RMXLBP2, SURT15KRMXLI, SURT20KRMXLI, SURT7500RMXLI, SURT7500XLI,Warranty2 years

The Smart 2-Port USB Car Charger is an ideal solution for charging mobile devices while on long road trips or short commutes. This high-performance car charger features a compact design for easy portability and provides a power output of 5V and 2.4A for device charging.The charger includes two USB-A ports to charge two devices at once. The Smart-IC technology identifies the mobile device's unique charging requirements to safely charge at the maximum speed. Having the ability to detect the accurate current output allows for protection against overloads, which can damage valuable mobile devices.5 volts and 2.4 amps of power are available for device charging from this adapter when it is plugged into a DC outlet. The 2.4 amps are shared by the two ports. The power output makes this adapter the perfect solution for charging smartphones and tablets.

APC BN1500M2-CA

Audible alarms Provides notification of changing utility power and UPS power conditions Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Battery replacement without tools Enables fast battery replacement, lowering Mean Time to Repair (MTTR). Battery-protected and surge-only outlets Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment Cold-start capable Provides temporary battery power when the utility power is out. Dataline surge protection Provides protection of connected equipment from power surges on the data lines. Disconnected battery notification Warns when a battery is not available to provide backup power. Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging. Resettable circuit breaker Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs) Safety-agency approved The UPS is UL1778 Listed Transformer-block spaced outlets Protect equipment with input transformer blocks without blocking access to other receptacles USB connectivity Provides management of the UPS via a USB port (not available on all models). User-replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

APC Back-UPS 1200VA, 120V, AVR, 2 USB Charging Port NEMA Sockets