Mobile Power Inverter Charges and Powers Multiple Electronic Devices in Your VehicleYou don’t have to be near your computer or an AC power source to keep your mobile devices fully charged and your power tools and small appliances operating. This 1500W mobile inverter converts 12V DC power from your car, truck, fleet vehicle, boat or RV’s battery into standard 120V AC power. Just connect the included battery cables between the inverter’s DC input terminals and the positive and negative terminals on your vehicle’s battery.Dual AC Outlets Provide Portable Power for Your Mobile ApplicationsThis compact power inverter provides a modified sine wave for use at remote locations, such as campgrounds, construction sites and mobile offices. Two NEMA 5-15R outlets deliver a continuous output of 1500 watts and a peak output of 3000 watts. That’s plenty to operate a variety of appliances and power tools, such as low-power lights, camping accessories, battery rechargers for small battery-operated power tools, and mobile office equipment.Dual USB Charging Ports Keep Your Devices at Full StrengthTwo 5V USB ports share 2.0 amps of charging capacity and remain active even when the inverter’s on/off switch is set to Off. This allows you to charge your smartphone, tablet, laptop, MP3 player or GPS unit without draining too much power from the vehicle’s battery.Includes the Latest Safety Features to Protect Your Equipment and BatteryAn on/off switch offers one-touch control over both AC outlets. If the power input from the vehicle’s battery drops below 10 volts or exceeds 16 volts, the mobile power inverter will automatically shut down. Green and red LEDs indicate normal and improper operation. Two load-controlled fans begin cooling automatically when the internal temperature rises to a certain level during extended use. An audible alarm sounds during excessively high or low voltage conditions.Brackets Included for Permanent MountingThe compact power inverter’s durable aluminum housing is designed to withstand the rigors of road trips, campouts, business trips and family vacations. Use the built-in mounting brackets and your own hardware to install the inverter permanently in a horizontal position.
The APSX6048VRNET 6000W APS X Series 48V DC 208/230V AC Inverter/Charger is a reliable power source for a wide variety of power tools, computers, audio/video components and other sensitive electronics at mobile, emergency and remote sites. With no fumes, fuel or excess noise, it’s an excellent alternative to generator power. The DC-to-AC pure sine-wave inverter delivers clean power to sensitive electronics. Its automatic line-to-battery transfer switch and integrated charging system allow the unit to work as a vehicle inverter, standalone AC power source or extended-run UPS. It delivers 6000W of continuous power, 9000W up to one minute or 12000W of peak power up to 10 seconds during equipment startup or cycling. An automatic overload detector, cooling fan and resettable AC circuit breakers protect the unit from damage. Designed for easy installation in RVs, commercial and fleet vehicles, emergency vehicles and construction equipment, the APSX6048VRNET converts stored power from a 48V battery or automotive DC source to safe, stable, computer-grade AC power for unlimited runtime in heavy-load conditions. When hardwired to an external 208V or 230V AC source, the unit keeps the user-supplied battery charged via a three-stage 23/90A selectable charging system while simultaneously delivering conditioned, pure sine-wave AC power to connected equipment. When used as a UPS, the APSX6048VRNET responds to blackouts and brownouts with an automatic, instantaneous transfer to battery-derived, pure sine-wave AC power. The optional SNMPWEBSOLOHV accessory card enables remote monitoring of the unit via SNMP, SSH, Telnet, and Internet. Reliable Power for Mobile, Emergency and Remote Sites Generates 208/230V pure sine-wave power from 48V battery bank Ideal for powering variable-speed tools, computers, LEDs, fans, audio/video components and other sensitive electronics Designed for easy installation in RVs, fleet vehicles and emergency vehicles Functions as vehicle inverter, standalone AC power source or extended-run UPS Unlimited runtime with variety of user-supplied batteries Pure Sine-Wave Power for Normal and Peak Power Demands 6000W of continuous power 9000W of reserve power up to 1 min. 12000W of peak power up to 10 sec. to accommodate surge power demands during equipment startup and cycling Automatic overload detector, cooling fan and resettable AC circuit breaker protect unit from damage High-current DC input terminals for simple hardwired installation Automatic Voltage Regulation Corrects brownouts and overvoltages without using battery power during battery charging and UPS standby modes Remote Monitoring Capability DB9 port for optional SNMPWEBSOLOHV, which turns the unit into a monitored network device Enables network monitoring via SNMP, SSH, Telnet, or the Internet Automatic Transfer Switching Transfer relay switches to inverter power during blackout in 10 or 20 ms DIP switches configure high and low voltage auto-transfer 3-Stage 23/90A Selectable Battery Charger Serves as battery charger when external 208V or 230V AC power is supplied and powering connected equipment Protects battery from overcharging and overdischarging Low-battery protection prevents excessive battery depletion DIP switches configure wet/gel charging profiles Remote Generator Starter Jack Connects to separate generator with user-supplied cable to automatically cycle generator when battery level is low Rugged Steel Housing Resists moisture, vibration, impact and high-humidity environments
Precision regulated DC power supplies are ideal for commercial/land-mobile, ham and CB radios, test bench supplies, base stations, tape players and amplifiers. Designed for years of reliable service and superior performance, they efficiently convert 120 volts AC into 13.8 volts DC (+/-0.5V). The Trim Line Series of DC power supplies offers a low-profile design with a footprint that matches the most popular radios on the market, such as Motorola, Radius, GE Monogram Series and EF Johnson models.Applications60 watt transmitters, VHF/UHF ham radios, commercial/land-mobile radios, low power linear amplifiers, test bench equipment, point-of-sale displays, aquariums.
The APSINT3636VR 3600W APS INT Series 36V DC 230V AC Inverter/Charger is a reliable power source for a wide variety of equipment ranging from power tools, pumps and portable lighting to laptop computers and sensitive monitoring equipment. With no fumes, fuel or excess noise, it’s an excellent alternative to generator power.The DC-to-AC inverter features an automatic line-to-battery transfer switch and integrated charging system that allow it to work as a vehicle inverter, standalone AC power source or extended-run UPS. It delivers 3600W of continuous power, 5400W up to one hour or 7200W of peak power up to 10 seconds during equipment startup or cycling. An automatic overload detector, cooling fan and resettable AC circuit breakers protect the unit from damage.Designed for easy installation in RVs, commercial and fleet vehicles, emergency vehicles and construction equipment, the APSINT3636VR converts stored power from any 36V battery or automotive DC source to safe, stable, computer-grade AC power for unlimited runtime. When hardwired to an external 230V AC source, the unit keeps the user-supplied battery charged via a three-stage 7.5/30A selectable charging system while simultaneously delivering AC power to connected equipment.When used as a UPS, the APSINT3636VR’s automatic voltage regulation feature protects your equipment against blackouts, brownouts, surges and line noise. The APSRM4 module with “traffic light” LEDs is included to provide complete remote monitoring and control of the unit.
- 12V DC or 120V AC input; 120V AC output (hardwired)- 1250 watts continuous and 2500 watts DoubleBoost inverter output- 3 stage, 14/55 amp selectable wet/dry cell battery charger- Built-in Isobar® premium AC surge protection and Auto Transfer Switching option for battery backup / UPS operation- Tested to power inverter standards UL458 (USA) and CSA (Canada)- High reliability large-transformer design with protected DC and AC wiring terminals
MFR: Netgear, Inc
Qty: 1
Part #: GS105NA