Showing 790–800 of 2841 results

The P782-015-DH HDMI/DVI/USB KVM Cable Kit connects your computer to an HDMI-enabled KVM switch. It includes a 15-foot (4.6-meter) USB A/B keyboard/mouse cable, a 15-foot HDMI monitor cable and an adapter for converting a DVI port to HDMI. Premium foil and braid shielding in the cables delivers reliable, error-free signal quality and protection from EMI/RFI interference. Integral strain relief ensures the cable and connectors last a long time. The adapter's molded gold-plated connectors and contacts ensure excellent conductivity.

The three-meter N845-03M-8L-MG MTP/MPO to 8xLC Fan-Out Patch Cable supports 40 Gb Ethernet speeds and is designed for high-density connections between 40GBASE-SR4 network equipment. With one male MTP/MPO and eight male LC connectors, this OM4-rated multimode fiber optic fan-out cable supports various multi- and single-fiber connections. It fully transmits 40GBASE-SR with four fibers transmitting at 10 Gbps in each direction. Base-8 Fiber compatible with both QSFP+ 40GBASE-SR4 and QSFP28 100GBASE-SR4 connections.Push/pull tab connectors are easily accessible in high-density data center applications and make the cable easy to install and remove with one hand. The magenta-colored N845-03M-8L-MG features a premium-grade ceramic ferrule for 10 GbE and faster applications. The slim, space-saving uniboot design makes cable easier to manage. The plenum-rated jacket is perfect for connecting high-speed network components in ceilings, walls and ducts. The sturdy plastic housing is built to last a long time.

Expands an Existing USB 3.0 Port to 2 Ports and Extends Them an Extra 6 ft.Move a hard-to-reach USB port within easy accessIdeal for connecting external hard drives, thumb drives, digital cameras and other USB-A devicesFeatures one USB 3.0 data/power port and one power-only portEnjoy SuperSpeed Transfer Rates in High-End ApplicationsSupports data transfer rates up to 5 Gbps—10x the speed of USB 2.0Bi-directional interface allows data to flow both directions at the same time, increasing theoretical bandwidth by 10xBackward compatible with earlier USB generationsFirst-Rate Construction for Superior Signal TransferPremium foil and braid shielding blocks EMI/RFI interferenceMolded nickel-plated connectors ensure excellent connectivityIntegral strain relief for cable and connectors’ long lifeTwisted 28/24 AWG data/power linesFlexible PVC jacket easy to install in tight spacesBlack padded non-sliding base

Extends the length of your existing hospital-grade power cord with NEMA 5-15P HG plug by 15 ft. Recommended for hospitals and other medical facilities.- Conforms to hospital-grade power cord standards- Tested to ANSI/UL 62 and 817 and CAN/CSA C22.2 no. 21 and 42- 125V/15A rating- Fully molded ends- Gray hospital-grade NEMA 5-15P HG and NEMA 5-15R HG connectorsThe P024-015-GY-HG Hospital-Grade Power Extension Cord features a NEMA 5-15P HG plug on one end and a NEMA 5-15R HG receptacle on the other, allowing you to extend the length of your existing hospital-grade power cord by 15 feet. This cord is tested to ANSI/UL 62 and 817, as well as CAN/CSA C22.2 no. 21 and 42 standards, ensuring it’s a safe, reliable power solution for hospital environments. This 15-foot 125V/15A cord features 14 AWG wire, a flexible SJT jacket and fully molded ends for optimum performance.Safe, Reliable Power Solution for Hospital Environments- Extends an existing hospital-grade power cord by 15 ft.- Gray hospital-grade NEMA 5-15P HG and NEMA 5-15R HG connectors- Conforms to hospital-grade power cord standardsOptimum Construction- Tested to ANSI/UL 62 and 817 and CAN/CSA C22.2 no. 21 and 42- 14 AWG wire- Flexible SJT jacket- Fully molded ends- 125V/15A rating

The P024-006-GY-HG Hospital-Grade Power Extension Cord features a NEMA 5-15P HG plug on one end and a NEMA 5-15R HG receptacle on the other, allowing you to extend the length of your existing hospital-grade power cord by six feet. This cord is tested to ANSI/UL 62 and 817, as well as CAN/CSA C22.2 no. 21 and 42 standards, ensuring it’s a safe, reliable power solution for hospital environments. This six-foot 125V/15A cord features 14 AWG wire, a flexible SJT jacket and fully molded ends for optimum performance.

Perfect Solution for High-Speed Cat6 Premise ApplicationsDesigned for do-it-yourself custom patch cable assembliesDelivers speeds up to 250 MHz/1 GbpsNo center spline and overall 0.22 in. diameter makes for easy RJ45 plug terminationReduces impedance and structural return loss compared to standard 100 MHz wireIdeal for 10/100/1000 Base-T Ethernet, 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice, EIA/TIA and Token Ring Type 3 applicationsPremium Construction for Superior PerformanceMade from 24 AWG copper wire (7 x 32 AWG per conductor)4-pair stranded UTPMinimum near-end crosstalkCMR-rated PVC jacketMeets most current industry standards, including IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568, ISO/IEC 11801 and ETL (category 6, draft 11)TAA-CompliantCompliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases