Showing 1660–1670 of 2841 results

14-ft. (4.27 m) 10Gig over copper patch cable100% FLUKE® tested and certifiedETL/UL VerifiedSupports IEEE 802.3af and is DTE power compliantBackward compatible with all previous 10BaseT generationsNew Cat6 RJ45 plug improves NEXT performance to 500Mhz24ga, 4pr, Stranded PVC cableCompatible with T568A and T568B wiringEasy disconnect snagless hoodPoE rated to four times the standard

25-ft. (7.62 m) 10Gig over copper patch cable100% FLUKE® tested and certifiedETL/UL VerifiedSupports IEEE 802.3af and is DTE power compliantBackward compatible with all previous 10BaseT generationsNew Cat6 RJ45 plug improves NEXT performance to 500Mhz24ga, 4pr, Stranded PVC cableCompatible with T568A and T568B wiringEasy disconnect snagless hoodPoE rated to four times the standard

Connect Network Equipment at Speeds Up to 100 GbpsCombines four 28 Gbps SFP channels into single high-density cableIdeal for data centers, high-end servers and enterprise wiring closetsMulti-platform support for 128G Fibre Channel and EDR InfiniBandLower port cost and power budget when compared to fiber opticsTop-of-the-Line Construction100 GbE 38-position “board-as-connector” designZinc die-cast male QSFP+ connectors for superior EMI resistanceErgonomic pull-tab ejectors for quick, easy connections8-pair wire technology optimized for bandwidth-intense applicationsFlexible 26 AWG conductors maintain smooth high-frequency responseFully Compliant and CompatibleMeets or exceeds strict 100-Gigabit Ethernet (100GBASE-CR4) standardsComplies with IEEE 802.3bj and RoHSComplies with latest QSFP28 MSA (Multi-Source Agreement) SFF-8665 architectureCompatible with all QSFP and QSRP+ portsCompatible to Cisco QSFP-100G-CU1M

1 Meter QSFP+ tp QSFP+ 40Gb Passive DAC Copper Infiniband cableMeets or Exceeds strict 40-Gigabit Ethernet 40GBase-CR4 standardsCompatible to Cisco QSFP-H40G-CU1MSDR, DDR, and QDR CompatibleQSFP+ to QSFP+ 30AWG SFF-8436 compliant cable and connectorUp to 10.3125 Gbps transfer rate per channel ( 40Gb aggregate )Multi-platform support for 40Gb, SAS, Fibre Channel, and SONETZinc die-cast QSFP+ connectors with "Pull-to-Release" latchingFully compliant to latest QSFP+ MSA ( Multi Source Agreement )Lower port cost and reduced power budget vs Fiber OpticsRoHS, SFF-8436, and IEEE 802.3ba CompliantBER better than 10¹²

This multimode duplex fiber optic ST/ST Ethernet cable is manufactured from 62.5/125 zipcord fiber. The cable has ST connectors on each end, a PVC jacket and is FDDI and OFNR rated. Duplex multimode fiber is most commonly used in LAN applications.

Manufactured from 62.5/125 duplex (zipcord) fiberPVC jacketLength: 10-meters/Connectors: 2 LC/ST connectors on each endInsertion loss testing performed on every connector (0.2db typical) and provided with cableBeveled edge on ends of glass makes insertion of plug a breezeFiber made from glass (not a polymer)Duplex multimode fiber is most commonly used in LAN applications where links are 10-ft. (3.05 m) or lessFiber optic distributed data interface (FDDI) ratedOFNR (riser rated)