Showing 50–60 of 89 results

Instant Connectivity and Reliable PerformanceThe NETGEAR Gigabit Unmanaged Switch series helps your business cost-effectively expand your network to Gigabit speeds and higher port counts. The GS516UP joins the series and offers 8 Ultra60 PoE++ ports and 8 PoE+ ports to power high-power PoE devices. With a total PoE power budget of 380W, deploy denser PoE+ and PoE++ devices to a single switch rather than multiple.The GS516UP is energy efficient, built to last, and rigorously tested to provide the reliability your business needs. 802.1p traffic prioritization and jumbo frame support allow for seamless integration with more sophisticated networks.Powerful Ultra60 PoE++Ideal for powering and connecting 802.11AX wireless access points, 4K/8K IP surveillance cameras, PoE lighting, and high power audio speakers, the GS516UP gives you a highly cost-effective and powerful switch with the best cost/PoE budget ratio. NETGEAR Ultra60 PoE++ Unmanaged Switches support the latest Energy Efficient Ethernet (IEEE 802.3bt) standard, powerful enough to support devices that require greater power.The GS516UP includes 8 UltraPoE++ ports that can deliver up to 60W of power per port.PoE ModeYour business is always changing and growing, but not all your devices may be 802.3bt standard compatible. PoE mode on the GS516UP solves this problem by providing power to both pre-bt and bt standard devices. - GS516UP by default uses 802.3bt standard, only compatible for bt standard devices- 802.3bt Standard Devices: to power bt standard devices, select 802.3bt mode to receive 60W of power- Pre-802.3bt Standard Devices: to power up pre-802.3bt standard products, select the pre-802.3bt mode to receive more than 30W of power- If the GS516UP is set to pre-802.3bt mode but the device is standard 802.3bt, then PoE++ power will not be delivered to the device. The switch will only deliver 802.3af (

The NETGEAR ANT2511AC antenna is designed to provide omni-directional wireless access with the WNDAP360/350/660 and WAC720/730/740 series Access Points. It will offer superior range and coverage for wireless client access around the Access Point. The lightweight, small form factor antennas allow the installation to be simple and intuitive.This antenna is meant for 802.11bgn and 11ac to give you multiple options for maximizing the reach and performance of your wireless infrastructure devices. Every WLAN deployment is unique. With both directional and omni-directional antennas, low-loss cables, mounting hardware, and other accessories, installers can customize a wireless solution that meets the requirements of even the most challenging applications.

The NETGEAR ANT24501B-10000S is a bundle containing 2 x 2.4 GHz (5 dBi gain) and 2 x 5 GHz (7 dBi gain) omni directional outdoor antennas, perfectly matched with the WND930 Dual Band High Power 802.11n Outdoor Access Point. The antennas have N-type antenna connectors, and can operate in an outdoor environment. The package comes with 4 antennas and ready to be install to the NETGEAR WND930 Outdoor Access Point

Inside or out, we’ve got your wireless 802.11 b/g/n devices covered.Optimal for medium range indoor or outdoor point to multi-point applications, the ProSAFE® 9DBI Omni-Directional antenna provides extended point-to-multi-point coverage for wireless 802.11 b/g/n devices.Optimize WLAN Range and Power with the ProSAFE® 9 dBi Indoor/Outdoor Omni-directional AntennaThe ANT2409 indoor/outdoor 2.4 GHz antenna provides extended point to multi-point coverage for wireless 802.11 b/g/n devices. Optimal for medium range indoor or outdoor point-to-multi-point applications. Included lightning arrestor helps prevent damage due to lightning-induced surges or static electricity in outdoor applications. Typically hung from crossbars of drop ceilings or on a rooftop, the waterproof and UV resistant ANT2409 includes wall and pole mounting materials for installation ease; antenna cable and grounding cable not included.NETGEAR ProSAFE® line of antennas and accessories for 802.11b, 802.11g and 802.11n devices give you multiple options for maximizing the reach and performance of your wireless infrastructure devices. Every WLAN deployment is unique. With both directional and omni-directional antennas, indoor and outdoor options, low-loss cables, mounting hardware, and other accessories, installers can customize a wireless solution that meets the requirements of even the most challenging applications.

NETGEAR M4500-48XF8C MGD SWCH. Switch type: Managed, Switch layer: L2/L3/L4. USB 2.0 ports quantity: 1, Console port: RJ-45. MAC address table: 32000 entries, Switching capacity: 4000 Gbit/s. Networking standards: IEEE 802.1AX, IEEE 802.3ad. Power connector: DC-in jack. Rack mounting, Form factor: 1U

M4200 Full Power PoE+ 8x2.5G and 2x10G Aggregation Switch for Wave 2 11ac AP Deployment, 8 full power PoE+ and multi-speed 1G, 2.5G ports combined with two 10G SFP+ uplinks, Halbe Bautiefe Allow for a fully non-blocking deployment of eight Wave 2 11ac access points mit 240W PoE budget, 8x2.5G to the access points and 2x10G line-rate aggregation to the wiring closet, Two of these multi-speed 1G, 2.5G PoE+ ports also support 5G speed, Multigigabit Ethernet is compatible with most major wireless and switching vendors, Multi-speed 2.5G/5G for 100 meter Cat5e/Cat6 cable runs with 1G backward compatibility, Plenum rated, slim design and mounting accessories allow to place this switch to optimize access points placement and cabling efficiency, inside and outside the rack, Lifetime hardware warranty, Lifetime Next Business Day and Lifetime online technical chat for investment protection and post-sales support, incl. umfangreichen Befestigungskit.

The GS110EMX and GS110MX come with 8 Gigabit Ethernet ports and 2 uplink 10-Gigabit/Multi-Gigabit (5-speed) ports that provide either 100 Megabit, 1-Gigabit, 2.5-Gigabit, 5-Gigabit or 10-Gigabit connectivity. The two uplink ports automatically detects which speed is needed by the connected device and provides the adequate speed. Moreover these two Multi-speed switch ports can be connected with regular Cat5E Ethernet cables, without the need to upgrade to Cat6 wiring, therefore reducing wiring costs and hassle.The GS110MX and GS110EMX offer flexible mounting options - they can be mounted in a rack, on a wall or can be used as a desktop switch. Moreover the compact and fanless design make the GS110MX and GS110EMX ideal for any home or business environment.

NETGEAR MS108UP. Switch type: Unmanaged. Basic switching RJ-45 Ethernet ports type: 2.5G Ethernet (100/1000/2500), Basic switching RJ-45 Ethernet ports quantity: 8. Full duplex. MAC address table: 16000 entries, Switching capacity: 40 Gbit/s. Networking standards: IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3bt,.... DC input voltage: 54 V. Power over Ethernet (PoE). Wall mountable

Easier configuration with new AV GUIThe AV-oriented, web-based, GUI permits factory or user-specified profiles to be asigned to individual ports as neededUse in noise-sensetive eviromentsAdjustable fans can be turned off if certain conditions are met. Even the defalt Quiet mode is quieter than most other switchesGet up and running fast with the little engineering time requiredOut NETGEAR IGMP PLUS feature is set from the factory to ensure out-of-the box functionality for most AV over IP installations

Smart Switch Series (GS510TPP)8-Port Gigabit Ethernet High-Power PoE+ Smart Switch with 2 Dedicated SFP Ports (190W)NETGEAR Smart Switches offer powerful L2 and L2+/Layer 3 Lite features, better PoE functionality, and enhanced performance and usability.Smart Managed Switches just got more powerful and flexibleAs a leading provider of network equipment for SMBs, NETGEAR understands the importance of providing great choice of PoE port counts and power budgets that can adapt to the business’s needs, whether in the hospitality, catering, education or retail domains. The GS510TLP 8-Port Gigabit Smart Managed Switch with PoE+ and 2 SFP Ports joins the NETGEAR Standalone Smart Managed Switches family, adding full 8 port PoE+ support for deployment of modern high-power PoE devices. Cautious spender organizations can now deploy denser PoE+ devices connected to a cost-effective switch, with a reasonable PoE power budget of 75W. Fan-less, the GS510TLP supports perfectly silent desktop operation or rack mounting.Organizations who buy infrastructure for the long term and want future proofing for the unforeseeable can require GS510TPP 8-Port Gigabit Smart Managed Switch with PoE+ and 2 SFP Ports: 190W PoE budget offers more headroom. Temperature- and load-based fan-speed control combines accurate monitoring with minimized system acoustic noise: unlike other high power PoE switches on the market, the GS510TPP supports quiet desktop operation or rack mounting with a maximum of 32dB at full power and 25°C (77°F) ambient.The GS418TPP Easy Mount 16-Port Gigabit Smart Managed Switch with PoE+ and 2 SFP Ports is future-proof with 240W of PoE budget and ideal for “Virtually Anywhere deployments. Slim design (3.94 inches, 10 cm deep) and mounting accessories allow for access point, IP camera or VoIP endpoint placement optimization and cabling efficiency even outside the rack. The GS418TPP supports Easy Mount quiet operation or rack mounting with a maximum of 33dB at full power and 25°C (77°F) ambient