Showing 10–20 of 64 results

The USB-C to VGA Video Adapter Converter with Power Delivery is an ideal solution for connecting a device with a USB 3.1 Type-C connector to an HDTV, projector, or other display with a VGA port while simultaneously charging the source device. The video support is built into the USB Type-C ports to feed an video signal to a VGA HDTV or projector. This adapter supports resolutions up to 1920x1200 at 60Hz, allowing it to deliver a high quality video image to the connected display.Ensure that a USB-C equipped laptop, smartphone, or tablet is fully charged and ready to go while displaying video content. Deliver up to 60W of charging power to the connected device whether you are out in the field presenting, hot-desking, or at home streaming movies. This video adapter converter offers a light-weight, portable, and simple way to deliver video and stay charged up.The USB-C connector has a robust design allowing for the connector to be plugged in and un-plugged up to 10,000 times. The sturdy construction ensures that the product provides peace of mind and is built to stand up to the rigors the most demanding on-the-go life. The USB-C connector has a symmetrical design which is identical on both sides, so it does not matter if you plug it in upside-down or right-side-up. It will plug in the first time, every time while preventing damage to the connector port. The color-coded USB Type-C connector allows this cable to be easily identified as a USB 2.0 cable and differentiated from other cables which may support a different feature set.Note: The USB-C female port located next to the VGA female port will only transfer power into the device that the male USB-C end of the USB-C to VGA Video Adapter Converter With Power Delivery is attached to. The USB-C female port cannot be used to power, charge, or output data to a device connected to the USB-C female port.

Keystone Snap-in Modules from Cables To Go provide a full range of solutions for voice, home networking, home office, audio, video and more. With the wide selection of snap-in modules, keystone wallplates and patch panels can be custom-configured to give you greater control and flexibility.

The 4-Port USB-A 3.0 Hub expands the USB capabilities of a computer by providing four USB-A ports, so you can connect more peripherals and transfer data up to 5Gbps – ideal for supporting USB 3.0 cameras, keyboards, mice, flash storage drives, and other low-powered USB devices. Small, lightweight, and portable, the hub can easily fit on a desktop or be stored in a laptop case. This hub is a perfect accessory for the Microsoft® Surface® Book 2, Chromebooks, and other leading laptops and tablets.With a transfer rate of up to 5Gbps, it is fully backward compatible with older USB 2.0 and 1.1 devices. No need to worry about software or drivers to install, the plug-and-play feature makes it simple to just connect and start using right away.

The Cables To Go USB 2.0 Fast Ethernet Adapter is up to 20 times faster than USB 1.1 Ethernet Adapters. With its 480Mbps of available bandwidth, you get true 10/100 network access. The plug and play design makes this adapter the most convenient and efficient way to connect a laptop or desktop computer to a fast ethernet network. With the USB 2.0 Fast Ethernet Adapter experience the full speed of your fast ethernet network without the need for opening your PC and adding internal network adapters. The adapter allows you to share the Internet or printers, transfer files, compete in multi-player games and more at blazing speeds of up to 200Mbps (in full duplex mode). The portable, compact size makes it ideal for use with laptops. The USB 2.0 Fast Ethernet Adapter is hot-swappable and 100% compatible with both USB 2.0 and 1.1 hardware.

RAPIDRUN VGA + 3.5MM DOUBLE GANG WALL PLATE + HDMI AND USB PASS THROUGH - WHITEUse with a Multi-Format Runner for projectors and any display requiring a VGA, 3.5mm audio and HDMI audio/video connection and a USB data connectionProduct Features• Supports VGA video and Stereo Audio signals over a RapidRun Multi-format runner• Flexible HDMI and USB pigtail for easy installation in a wall box• Compatible with standard double gang wall boxes• Aluminum construction for durability and long lifeProduct DescriptionRapidRun is designed to be the standard for in-wall audio/video installations. Using pre-terminated Break-away flying leads and wall plates with an in-wall runner ensures flexible, efficient, high quality connections for all types of equipment, with no field terminations.Ideal for educational and institutional installations, this wall plate allows VGA video, 3.5mm stereo audio to be run over one runner cable, while the HDMI and USB pass through ports allow for a seamless transition to an in-wall cabling. This wall plate is constructed from aluminum for durability and a long life.Please note: Each complete RapidRun Multi-Format solution requires a break-away flying lead or wall plate to terminate each end of the runner cable. Each runner requires (2) break-away flying leads, (2) wall plates, OR (1) break-away flying lead and (1) wall plate. Due to constraints of available conductors for signal transmission, EDID signals are not supported with this product.

The USB to VGA Adapter - External Video Card is the perfect solution for adding duplicate or extended desktop to a computer utilizing a USB port. The duplicate feature allows a user to show the same images from the primary display on a secondary display. This is useful in situations where a presentation must be given. The extended desktop feature allows the user to expand the desktop workspace from the primary display to both the primary and secondary display allowing different images to be shown on the two monitors. This is useful for increasing productivity when working in multiple applications or comparing data between two programs. The adapter is designed for compatibility with USB 3.0 ports. The USB 3.0 specification provides up to ten times the bandwidth of USB 2.0, which allows this adapter to support full motion video. Additionally, this adapter has a low power requirement which, when used with a mobile laptop, will allow the laptop battery to last longer. The software required for operation of the adapter is included and is easy to install and configure. Once the software is installed, up to six adapters may be connected to the computer allowing multi-display capability. High definition resolutions of up to 2560x1600 are supported and video streaming is supported at a resolution of up to 1080p. With a compact form factor and rugged housing, this adapter combines functionality and durability, ensuring optimal performance and results.

Use with a Multi-Format Runner for projectors and any display requiring a VGA, 3.5mm audio and RCA audio/video connectionProduct Features- Supports VGA video, Stereo Audio, Composite Video and RCA Stereo Audio signals over a RapidRun Multi-format rRunner- Flexible HDMI pigtails for easy installation in a wall box- Compatible with standard double gang wall boxes- Aluminum construction for durability and long lifeProduct DescriptionRapidRun is designed to be the standard for in-wall audio/video installations. Using pre-terminated Break-away flying leads and wall plates with an in-wall runner ensures flexible, efficient, high quality connections for all types of equipment, with no field terminations.Ideal for educational and institutional installations, this wall plate allows VGA video, 3.5mm Stereo Audio, Composite Video and RCA Stereo Audio to be run over one runner cable, while the dual HDMI pass through allows for a seamless transition to two in-wall HDMI cables. This wall plate is constructed from aluminum for durability and a long life.

Add the finishing touch to audio/video installations with a feed-through wall plate. This wall plate is stamped from sturdy 20 gauge stainless steel, and is designed to mount in standard electrical boxes or mud rings. The thick aluminum composition provides better protection than plastic wall plates in commercial environments where constant wear and tear causes damage.Feed-through connectors and identification markings make this wall plate simple to install and easy to connect equipment. Furthermore, it is compatible with any existing wiring network. The single gang design offers connectors for HD15, 3.5mm stereo audio, composite video, and left/right audio, all in one wall plate. In addition, the cut-out provides a space for additional components like our USB Superboosters that fit a Decora-style opening. Feed-through connectors are designed to offer lossless signal transfer and maximum insertions for a lifetime of service.Please Note: Decora® is a registered trademark of Leviton Manufacturing Company, Inc. This product is not manufactured or endorsed by the Leviton Manufacturing Company, Inc

This USB-C to HDMI Audio/Video Adapter Converter is an ideal solution for connecting a device with a USB-C port to an HDTV, projector, or other display with an HDMI port. This adapter supports up to a 4k (3840 x 2160) at 60Hz resolution, allowing it to deliver a high-quality video image to the connected display. The compact design of this adapter makes it a perfect pair for BYOD (Bring Your Own Device) applications in education or corporate environments. This adapter is an ideal accessory for Apple® and other leading laptops and tablets.

This USB-C to DisplayPort Adapter Converter is ideal for showing presentations, pictures, or other audio/video content from the USB-C port of a laptop or tablet to the DisplayPort input of a monitor, projector, or HDTV. This adapter supports up to a 4K (3840 x 2160) at 60Hz resolution, allowing it to deliver a high-quality video image to the connected display. The compact design of this adapter makes it perfect for BYOD (Bring Your Own Device) applications in education or corporate environments. This adapter is an ideal accessory for Apple® and other leading laptops and tablets.