Showing 1070–1080 of 2476 results

"C2G 26906 video cable adapter 11.8"" (0.3 m) USB Type-C HDMI Black"

Today's mission critical advanced Fast Ethernet and Gigabit computer networks require the stability and reliability of Enhanced Category 5 high-speed cabling to distribute data, voice and video. To protect your high-speed network from noise and electromagnetic interference, use Cables To Go's Shielded Enhanced Cat5 Patch Cables. Each cable meets all Cat 5e TIA/EIA standards. The molded boot provides extra strain-relief and durability. Cables To Go Shielded Enhanced Cat5 Patch Cables are available in a variety of colors to easily color-code your network installation. - Connector: Shielded 50-micron gold plated RJ-45 Male to Male - Conductor: 4-pair 24 AWG Stranded STP - Jacket: PVC - Molded boot provides extra strain-relief and durability - Foil shielding with drain wire - Applications: - 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3) - 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN - 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM - Voice - Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications in high-noise environments - Wired: TSB 568B (AT&T 258A) - Certifications: TIA/EIA

Audio installations in educational and commercial settings often require in-wall rated cable. Our CMG-rated line was specifically engineered to meet this requirement while overcoming common challenges faced by installers in these environments. Low-Profile connectors (1.41in total depth) save valuable space in the gang box. This cable is constructed from 22 AWG twisted pair wire and drain wire. The entire cable is foil shielded to ensure signal integrity. CMG rated cables meet many NEC requirements for Communications Cables General Purpose In Wall Use. Our cables meet the following ratings: CMG, FT4, CM, CL3, CL2, CMX, CL3X, and CL2X.

For voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 550 MHz. Meets all Cat6 TIA/EIA-568-B-2.1, draft 9 standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100 MHz wire.Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point.Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels.The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation.

Value Series RG6 F-Type Cables are constructed with 75ohm coaxial cable that delivers high-quality video images. Low-loss 75ohm copper-clad wire and polyethylene dielectric provides accurate picture resolution and color. A foil and double-braid shield protects against unwanted noise and interference. The molded connectors attach to a flexible jacket allowing for easy installation. The 24K gold plated heavy-duty connectors ensure long lasting, corrosion-free connections. Connect digital cable boxes, DSS receivers or any video source with F-type output connections to any TV with matching F-type input jacks. Ordinary, "included in the box" F-type cables often use low-quality materials with inferior shielding, which can result in poor picture quality. Our Value Series RG6 F-Type Cables deliver all the detail, color and brightness you expect from your audio/video components. - Connectors: F-Type Plug to F-Type Plug. - 18AWG RG6 copper-clad steel center conductor delivers quality video. - Foil and double braid shield provides a clear, noise-free, vivid picture. - Flexible PVC jacket for easy installation. - Corrosion-resistant, precision-made 24K gold plated connectors ensure long lasting quality. - Fully molded connectors provide excellent strain relief that keeps your cable intact. - Ideal for connecting digital cable boxes, DSS receivers or any video source with F-type output connections to any TV with matching F-type input jacks.

The USB-C to A SuperSpeed USB 5Gbps Male to Male Cable is the perfect solution for connecting any standard USB-C enabled device to a USB-A device or accessory for charging and data transfer.Ensure that a USB-C equipped laptop, smartphone, or tablet is fully charged and ready to go from the 3A charging output, while simultaneously transferring photos, music, or data at speeds up to 5Gbps.The USB-C connector has a symmetrical design which is identical on both sides, so it does not matter if you plug it in upside-down or right-side-up. It will plug in the first time, every time while preventing damage to the connector port.

Right-angled plug enables a flat panel TV to be mounted flush to the wall Replace your overused or misplaced power cable, or just get some extra cords for convenience. This universal power cord is designed to work with most PCs, monitors, scanners, printers and other devices that use the 3-pin shroud power connector. Plus this heavy-duty 18 AWG cord features a fully molded design for maximum durability and long life. The female connector plugs directly into the device while the male connector plugs into a standard outlet. Connector 1: 3-pin shroud Female (IEC320C13) Connector 2: 3-prong grounded plug Male (NEMA 5-15P)

Fast, fast, fast - the three words that describe Cables To Go's Cat6 network cables. Perfect for distributing data, voice and video, these 550MHz rated patch cables ensure you always have the necessary throughput to handle today's and tomorrow's bandwidth-intensive applications. Each cable is fully tested and quality inspected, ensuring all EIA/TIA Cat 6 TIA/EIA- 568-B-2.1, draft 9 standards are met. Note: These cables are for 10/100 ethernet only and wil not work for gigabit ethernet since only two pairs of this cable are crossed.Cat6 patch cords from Cables To Go drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire, which ensures error-free transmission! Constructed with high-quality cable and a shortened body plug, this design will keep Near-End Crosstalk (NEXT) levels to a minimum.Our all-new molded, snag-free "clip" prevents unwanted cable snags during installation without impairing your ability to insert and remove the connector from the port. It also provides unparalleled strain-relief, so that the cable is not damaged even when pulled on excessively.- Connector: 50-micron gold plated RJ-45 Male to Male- Conductor: 24 AWG Stranded Copper- Jacket: PVC- All-new molded, snag-free boot prevents unwanted cable snags while providing easy insertion and extraction from network ports- Crossed pin configuration allows you to connect two computers "peer-to-peer" without the need for a hub or switch- Perfect for connecting network switches and hubs without an uplink port to other switches and hubs

For voice/data/video distribution, this cable it will handle bandwidth-intensive applications up to 550 MHz. Meets all Cat6 TIA/EIA-568-B-2.1, draft 9 standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100 MHz wire. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point.Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels. The moulded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of Colours to easily colour-code your network installation.Connector 1: (1) RJ-45 MaleConnector 2: (1) RJ-45 Male

Right-Angle replacement power cord for PC, monitor, printer, scanner, etc.Plug in the Universal Power Cord from Cables To Go to replace your overused or misplaced power cable. Universal Power Cords are designed to work with most PCs, Monitors, Scanners, Printers and other devices that use the 3-pin shroud power connector. All Cables To Go power cables feature a fully molded design that provides maximum durability and long life.