Showing 300–310 of 958 results

APC SMX2000LV. Output power capacity: 2 kVA, Output power: 1800 W, Waveform: Sine. AC outlet types: NEMA 5–15R, NEMA 5–20R, NEMA L5-20R, Power plug: NEMA 5-20P, AC outlets quantity: 10 AC outlet(s). Battery technology: Sealed Lead Acid (VRLA), Battery recharge time: 3 h. Form factor: Rackmount/Tower, Product color: Black, Rack capacity: 2U. Width: 7.01" (178 mm), Depth: 19" (483 mm), Height: 17" (432 mm)

APC GVSBPIT75 is a high-quality input isolation transformer designed to work seamlessly with Galaxy VS UPS systems. It provides reliable electrical isolation between utility power and critical equipment, protecting sensitive loads from voltage fluctuations, electrical noise, and grounding issues. This transformer is ideal for data centers, server rooms, industrial operations, and enterprise IT environments where consistent power quality and equipment protection are essential.

High availability, ruggedized power protection for shipboard and other transportation applications.

GVSBPSU60G-WP FeaturesGalaxy VS Maintenance Bypass Panel, single unit, 10-30kW 208V, 20-60kW 480V wallmountMaintenance bypass panel for complete isolation of the UPS during service operations.

APC NetShelter Rack PDU Advanced, Switched, 14.4kW, 3PH, 208V, 50A, CS8365C, 42 OutletAPC NetShelter Rack PDU Advanced provide reliable power distribution to IT Equipment within server and/or networking racks. Switched outlets to turn outlets on or off remotely. PDU level power metering via remote access and local display for power visibility and notification of potential overload. 4-in-1 combination outlets which can be used as either C13, C19, C15, or C21 outlets provide unparreled deployment flexibility. Maximum outlet density with 42 outlets in a 2.2" wide form factor. Outlets on the PDUs are color coded and/or labeled by breaker and input phase on 3 phase models to simplify deployment. Provides an alternating phase design whereby each of the 3 phases are organized into small outlet groups which alternate from top to bottom of the PDU to facilitate better power cord management and promote better load balancing. Power Sharing allows PDUs cascaded together via 2 ethernet ports enable an Network Management Card to continue functioning in the event of an AC power loss. No interruption in Network communication, sensors operation, and alarm traps. Live Swap Network Management Card (NMC) which can be replaced without powering down the PDU or connected devices to minimize downtime in the unlikely event of an NMC power event. Rated and approved to operate up to 60C (140F) at full load ensures reliability and availability even in today's high density deployments. Gigabit ethernet to enhance and standardize network connectivity across all assets in the data center. A second ethernet port (10/100) is available to allow cascading to other PDUs, connect to a 2nd private network, or provide network redundancy. 1% metering accuracy for the peace of mind to use NetShelter Rack PDU Advanced to bill based on power usage. In addition, the higher level of accuracy ensures the most precise measures for capacity planning and threshold alarm monitoring. Two environmental sensor ports allow for optional sensors (sold separately) to be connected.

APC NetShelter Rack PDU Advanced, Metered, 8.6kW, 3PH, 208V, 30A, L21-30P, 42 OutletAPC NetShelter Rack PDU Advanced provide reliable power distribution to IT Equipment within server and/or networking racks. PDU level power metering via remote access and local display for power visibility and notification of potential overload. 4-in-1 combination outlets which can be used as either C13, C19, C15, or C21 outlets provide unparreled deployment flexibility. Maximum outlet density with 42 outlets in a 2.2" wide form factor. Outlets on the PDUs are color coded and/or labeled by breaker and input phase on 3 phase models to simplify deployment. Provides an alternating phase design whereby each of the 3 phases are organized into small outlet groups which alternate from top to bottom of the PDU to facilitate better power cord management and promote better load balancing. Power Sharing allows PDUs cascaded together via 2 ethernet ports enable an Network Management Card to continue functioning in the event of an AC power loss. No interruption in Network communication, sensors operation, and alarm traps. Live Swap Network Management Card (NMC) which can be replaced without powering down the PDU or connected devices to minimize downtime in the unlikely event of an NMC power event. Rated and approved to operate up to 60C (140F) at full load ensures reliability and availability even in today's high density deployments. Gigabit ethernet to enhance and standardize network connectivity across all assets in the data center. A second ethernet port (10/100) is available to allow cascading to other PDUs, connect to a 2nd private network, or provide network redundancy. 1% metering accuracy for the peace of mind to use NetShelter Rack PDU Advanced to bill based on power usage. In addition, the higher level of accuracy ensures the most precise measures for capacity planning and threshold alarm monitoring. Two environmental sensor ports allow for optional sensors (sold separately) to be connected.

Symmetra PX 100kW Scalable to 100kW, 208V with Startup, No Battery- Adjustable voltage sensitivityProvides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.- Adjustable voltage-transfer pointsMaximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.- Advanced electrical featuresExcellent power conditioning, very low harmonic distortion through IGBT rectifier, input power factor correction, and high power efficiency- Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.Total Cost of Ownership- Input power factor correctionMinimizes installation costs by enabling the use of smaller generators and cabling.- Generator compatibleEnsures clean, uninterrupted power to protected equipment when generator power is used.- 5x8 Start-up service includedRequired for full coverage of factory warranty- Fully-rated power kVA equals kWReduces cost by eliminating the need for an oversized UPS for Power Factor Corrected (PFC) loads.Agility- Programmable frequencyEnsures compatibility with different input frequencies.- Scalable power capacityReduces UPS over-sizing costs today by allowing quick power upgrades, within the same footprint, later.- SmartSlotCustomize UPS capabilities with management cards.Sustainability- ENERGY STAR for UPSEstablishes that the efficiency of the UPS is in the top 25% of the market as verified by third party testing- EU CoC for UPSEnsures that UPSs sold in the EU are highly efficientManageability- LED status indicatorsQuickly understand unit and power status with visual indicators.- Audible alarmsProvides notification of changing utility power and UPS power conditions- Integrates with StruxureWare Data Center ExpertAn IT-ready, scalable access monitoring system that collects, organizes, and distributes critical alerts, surveillance video and key information, providing a unified view of complex physical infrastructure environments from anywhere on the networkMarketing Features- Battery modules connected in parallelDelivers higher availability through redundant batteries.- Configurable for N+1 internal redundancyProvides high availability through redundancy by allowing configuration with one more Power Module than is necessary to support the connected load.- Generator compatibleEnsures clean, uninterrupted power to protected equipment when generator power is used.- Scalable power capacityReduces UPS over-sizing costs today by allowing quick power upgrades, within the same footprint, later.- Power Modules connected in parallelEnhances availability by allowing immediate, seamless recovery from isolated module failures.- User-replaceable power modulesEnables simple upgrades and replacements of the Power Modules.- Modular designProvides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.- Network manageableProvides remote power management of the UPS over the network.- User-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)- Fully-rated power kVA equals kWReduces cost by eliminating the need for an oversized UPS for Power Factor Corrected (PFC) loads.Availability- Configurable for N+1 internal redundancyProvides high availability through redundancy by allowing configuration with one more Power Module than is necessary to support the connected load.- Redundant Intelligence ModulesProvides higher availability to the UPS connected loads by giving redundant communication paths to critical UPS functions.- Power Modules connected in parallelEnhances availability by allowing immediate, seamless recovery from isolated module failures.- Swappable power modulesAllows quick addition of power capacity or replacement of existing power modules. Installed modules are automatically recognized by the system.- Modular designProvides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.- Network manageableProvides remote power management of the UPS over the network.- Automatic internal bypassSupplies utility power to the connected loads in the event of a UPS power overload or fault.

Genuine APC RBC(TM) are tested and certified for compatibility to restore UPS performance to the original specifications.Includes Installation guideTested and approved to restore the performance of your APC UPS. Maintains UPS safety certifications (UL, VDE, CSA) and lifetime equipment protection policy (as applicable).Designed by APC by Schneider Electric exclusively for APC UPS's for complete compatibility with the intelligent battery management system.APC RBCs are safe, reliable and contain a minimum number of connections saving valuable time. Because APC RBCs are hot-swappable, no network downtime is required in order to install them.

Schneider Electric GVSOPT036 uninterruptible power supply (UPS)

APC Smart-UPS 750VA 120V Shipboard